|
|
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $48.45 4% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5002
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5002
|
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.
-
4.0 of 5.0 with 26 Reviews
SALE PRICE: $48.64
Manufacturer: CONDOR
Brand: Condor
Manufacturer: CONDOR
Brand: Condor
ItemPressure Switch Factory On/Off Setting120/150 psi Differential25 to 65 psi Range25 to 160 psi Port Type1-Port 1/4" FNPT Contact FormDPST ActionStandard ApplicationAir Compressor UnloaderNo NEMA Rating1 SeriesMDR11 HP @ 1 Phase - 120V2 HP @ 1 Phase - 240V3 Temp. Range-22 Degrees to 257 Degrees F StandardsUL Listed, CSA Certified
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $49.00 25% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF450-000-R
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF450-000-R
Cf4.5 knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $49.00 25% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF462-250-R
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF462-250-R
Cf4.62 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a bored flange with bolt through holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.
-
4.0 of 5.0 with 28 Reviews
SALE PRICE: $49.00 1% OFF
Manufacturer: CME Tools
Brand: CME Tools
Manufacturer: CME Tools
Brand: CME Tools
MADE OF STAINLESS STEEL. DISPLAY UP TO 12"/300MM . * X-LARGE LCD SCEEN. * 3 BUTTONS: ON/OFF, MM/INCH, ZERO SET. * 0.0005" GRADUATION * JAW DEPTH: 2.5" * REMOTE DISPLAY OUTPUT. * OD & ID MEASURING. * QUESTIONS? E-MAIL: [email protected]
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $49.23 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFP826R1
Manufacturer: Winters
Brand: Winters
Model: PFP826R1
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
-
4.0 of 5.0 with 40 Reviews
SALE PRICE: $49.90 1% OFF
Manufacturer: SINOCMP
Brand: SINOCMP
Model: EX300-5 EX200LC-5 EX220LC-5
Manufacturer: SINOCMP
Brand: SINOCMP
Model: EX300-5 EX200LC-5 EX220LC-5
|
SINOCMP Pressure Sensor 4332040 for Hitachi EX300-5 EX200LC-5 EX220LC-5Product Specification: 1. Part Number: 43320402. Application Model: EX300-5 EX200LC-5 EX220LC-53. Warranty: 3 month4. Package: standard retail carton or customer require Advantage: 1. Specialized in excavator spare parts for more than 4 years. 2. 100% quality assurance, develop and manufacture follow original ones. 3. All products have warranty, Monitor and Controller have 1 Year Warranty. 4. Quick response within 24 hours. 5. Excavator spare parts in full-scale are available. 6. Small order allowed. 7. Original packing, neutral packing or customized packing. 8. Positive customer feedback from abroad market. Shipping detail: 1. United States: 5-8 working days. (If urgently,please contact us, we can send you by expedited shipping,it need about 3-5 working days.) 2. Other Country: 7-15 working days. EMS will be need more days. 3. Item will be shipped 1-2 working days after payment received. We only ship to the confirmed address given on Amazon. Please make sure the address is correct. 4. Please leave your physical address after the order, Because DHL/UPS/FedEx/TNT don't accept BOX address. Attention: 1. The picture is for reference only. Please make the object as the standard.Before ordering, please make sure the model number and part number 2. Special requirement you can give us a message. 3. Any question, please contact us before leave negative feedback or low stars. We will do our best to your satisfaction.
-
4.0 of 5.0 with 50 Reviews
SALE PRICE: $49.95 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our SERIES 2-5000 Minihelic® II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig.
-
4.0 of 5.0 with 3 Reviews
SALE PRICE: $50.51 1% OFF
Manufacturer: Parker
Brand: Parker
Model: 14E11B18FC
Manufacturer: Parker
Brand: Parker
Model: 14E11B18FC
|
This Parker 14E miniature series compressed air filter/regulator is for water and particulate removal, and air pressure control. This filter is a single-unit, integral, "piggyback" filter/regulator for space-saving installations and has a relieving-style regulator to exhaust excess pressure for increased performance and safe operation. It has a removable, non-rising knob for tamper resistance and male National Pipe Taper (NPT) threads for connecting to female threaded pipes. Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies.
-
4.0 of 5.0 with 5 Reviews
SALE PRICE: $50.66 1% OFF
Manufacturer: Honeywell, Inc.
Brand: Honeywell
Manufacturer: Honeywell, Inc.
Brand: Honeywell
SP970A1013, Honeywell, Inc., Pneumatic Manual or Minimum Position Switch 55 to 105 psi Output Pressure
|
|