|
|
-
3.9 of 5.0 with 15 Reviews
SALE PRICE: $59.89
Manufacturer: MAXIM INTEGRATED PRODUCTS
Brand: MAXIM INTEGRATED PRODUCTS
Manufacturer: MAXIM INTEGRATED PRODUCTS
Brand: MAXIM INTEGRATED PRODUCTS
MAXIM INTEGRATED PRODUCTS DS1831S+ MPU SUPERVISOR, DUAL, 5.5V, NSOIC-16
-
3.9 of 5.0 with 13 Reviews
SALE PRICE: $60.00
Manufacturer: Sierra Instruments, Inc.
Brand: Sierra Instruments, Inc.
Color: White, Black
Manufacturer: Sierra Instruments, Inc.
Brand: Sierra Instruments, Inc.
Color: White, Black
Specifications -Most gases; check compatibility with wetted materials -Accuracy: +/- 1.5% of full scale -Repeatability: +/- 0.5% of full scale -Nylon version to 50 slpm (nlpm) maximum -Aluminum version to 175 slpm (nlpm) maximum -Stainless-steel version 500 slpm (nlpm) maximum -Response time: 800ms time constant -Pressure: Stainless-steel version to 500 psig (34.5 barg) maximum; Aluminum and Nylon versions to 150 psig (10 barg) maximum -Gas/ambient temperature 32 to 176°F (0 to 80°C), all versions -15 VDC, 24 VDC power supply -Wetted materials: 10% glass-filled Nylon® 6/6; 316 stainless-steel -Seals: Viton, Neoprene, Kalrez, Teflon -Analog signals included: 4-20 mA; 0-5 VDC -CE approved
-
3.9 of 5.0 with 45 Reviews
SALE PRICE: $60.92 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ722
Manufacturer: Winters
Brand: Winters
Model: PFQ722
|
The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...
-
3.9 of 5.0 with 14 Reviews
SALE PRICE: $60.98 1% OFF
Manufacturer: GENERAL ELECTRIC GE
Brand: GE
Manufacturer: GENERAL ELECTRIC GE
Brand: GE
NEW GENERAL ELECTRIC GE PTX 651-3809 DRUCK 9-30V-DC 500PSI TRANSMITTER D515136
-
3.9 of 5.0 with 13 Reviews
SALE PRICE: $61.10 21% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9735122
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9735122
|
The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...
-
3.9 of 5.0 with 1 Reviews
SALE PRICE: $61.60 18% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 160-18
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 160-18
|
Ideal for use with our precision manometers and air velocity gauges, Dwyer® Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
-
3.9 of 5.0 with 33 Reviews
SALE PRICE: $63.59 1% OFF
Manufacturer: Asco
Brand: Asco
Manufacturer: Asco
Brand: Asco
This item is brand new, but does not include original packaging!
-
3.9 of 5.0 with 6 Reviews
SALE PRICE: $63.60 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50533614
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50533614
|
The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...
-
3.9 of 5.0 with 42 Reviews
SALE PRICE: $64.07 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-405
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-405
Steel cases are substantially constructed and finished in gray hammerloid. Molded plastic cases are gray, high density polyethylene
-
3.9 of 5.0 with 50 Reviews
SALE PRICE: $64.70 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9699257
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9699257
|
The WIKA industrial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in a stainless steel case that resists corrosion against most samples. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi. It is accurate to + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center back mount, and comes with a choice of a 1/8", 1/4", or 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for gaseous or liquid samples, including those found in hydraulics and compressors in the process industry.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a globa...
|
|