Pressure & Vacuum - Page 397

Manufacturer: HONEYWELL S&C Brand: Honeywell Model: MLH150PSB01B

HONEYWELL S&C MLH150PSB01B PRESSURE SENSOR

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-2007-LCD

The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A3000-150CM

Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) WC up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-7.5-400-N

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 40-901-15000-psi/kPa

The NoShok 900 series stainless steel 304 case pressure gauge has brass wetted parts, a liquid-filled circular dial, a variety of connection types available, and measures pressure with a dual scale with an accuracy of + or - 1% or 1.5%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The dial is 2.5" (63 mm) or 4" (100 mm) in diameter and enclosed in a stainless steel 304 case for corrosion resistance. The gauge has a safety relief disc on the top of the case. The lens for the 2.5" gauge is polycarbonate for high impact resistance. The lens for the 4" gauge is instrument glass for strength and clarity. The dial is filled with glycerin and water for protection against vibration and pulsation. The dial has a white aluminum background with black and red markings and is UV resistant. The 2.5" gauge has a molded plastic pointer. The 4" gauge has a balanced aluminum pointer with a black finish. The gauge measures pressure with a dual scale in psi/kPa, Hg. vacuum/kPa, bar/psi, or Hg. vacuum/bar. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade A accuracy class. The 4" gauge is accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. The male connection is located on the bottom or center back of the gauge and is available with a 1/4" NPT (National Pipe Thread) rate, a 1/2" NPT rate, a 1/4" British Standard Pipe Parallel thread (BSPP) rate, or a 7/16" to 20" adjustable 1/8" rate. The movement is brass and nylon with highly polished bearing surfaces. The bourdon tube is phosphor bronze C-Type for gauges with up to 600 psi and a coiled safety tube for gauges above 600 psi. The gauge operates in fluctuating pressure up to 60% of the dial range and in static pressure up to 90% of the dial range. The ambient temperature for the gauge is -4 to 140 degrees F (-20 to 60 degrees C). The media temperature range is -4 to 140 degrees F (-20 to 60 degrees C). This pressure ga...

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 351009SWL02L30IMV&60#

Ashcroft is pleased to reintroduce the 1009SW Duralife pressure gauge. This gauge has been upgraded with many new features outlined above while maintaining the tried and true performance and quality you have come to expect. Duralife 1009SW gauges provide significant features and benefits. New features include a ventable plug that can be sealed or vented depending on your environment and a patent pending through-dial recalibration that reduces recalibration time. The combination of features including the patented PowerFlex movement and optional PLUS! Performance dampening system in the 1009SW is the finest gauge technology for vibration, shock and pulsation applications. Available in pressure ranges from vacuum to 15,000 psi, including compound and metric ranges.

Manufacturer: Ashcroft Brand: Ashcroft

Gauge is ideal for use where ambient corrosion is a concern. Designed with stainless steel case and ring that offers excellent resistance to chemical, weather, and corrosion attack. Features 4-1/2" dial for differential low-pressure applications. This listing is for each. Technical Specification Differential Pressure Gauge Type Differential Pressure Gauge Item Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts PTFE / Buna-N Differential Gauge Connection Type FNPT Differential Gauge Connection Size 1/8 Gauge Connection Location Back and Side Differential Pressure Range Units In. H2O Differential Pressure Range Value 0 to 20 Gauge Accuracy +/-3.00% Body Material Glass Filled Nylon Gauge Primary Range Smallest Graduation 0.5 Diaphragm Material Buna-N Piston Material PTFE Seal Material Buna-N Gauge Operating Temp. Range 0 Degrees to 140 Degrees F Rated Total Pressure 35 psi Dial Material Stainless steel Scale Type Pressure Includes Instructions Manufacturers Warranty Length 5 yr.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06E24B18AC

Technical Specification Item Filter/Regulator Pipe Size 3/8 NPT Max. Flow 55 cfm Max. Pressure 250 psi Max. Temp. 175 Degrees F Filter Rating 5 micron Bowl Material Die Cast Zinc Bowl Size 4.4 oz. Adjustment Range 0 to 125 psi Gauge Port Size 1/4 NPT Adjustment Knob Non Rising Drain Type Manual Overall Height 10.38 Overall Width 2.81 Includes Filter/Regulator, Metal Bowl, Sight Glass, Manual Drain and Gauge Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: All Sensors Brand: All Sensors

Board Mount Pressure / Force Sensors 0-10" H2O Gauge 20mV 16V supply 1 port

Manufacturer: Replacement Parts Industries RPI Brand: Replacement Parts Industries RPI

Features: 115/230VAC, Contacts: N.C. DPST, Factory set to: On at 80 PSI - Off at 100 PSI, 1/4" FPT input port Fits: Matrx and Midmark Compressors Model(s) this part fits: AMD-100, AMD-100-2, AMD-100-3, AMD-101, AMD-2, AMD-2, AMD-2-115, AMD-4, AMD-6, CL21, CL22, CL32, CL52, OL-100, OL-100-2, OL-100-3, OL-101, OL-2000, OL-2001, OL-4000, OL-6000, P21, P22, P32, P52, P72