Pressure & Vacuum - Page 399

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9833760

The WIKA process pressure gauge has stainless steel wetted parts, which are corrosion resistant against chloride, and a circular dial that is enclosed in a thermoplastic case for increased durability, particularly in low temperature environments. The gauge measures pressure from 15 pounds per square inch (psi) to 30,000 psi. Up to 20,000 psi, the gauge has an accuracy of + or - 0.5 percent of span, or American Society for Mechanical Engineering (ASME) B40.100 Grade 2A accuracy class. For pressure above 20,000 psi, the gauge has an accuracy of + or - 1.0 percent of span, or ASME B40.100 Grade 1A accuracy class. The male connection is available as either a lower mount or a lower back mount, and comes with a choice of a 1/4" or 1/2" National Pipe Thread (NPT) rate. This gauge is suitable for use in corrosive environments in process industries, such as chemical or petrochemical applications, mining applications, and power stations.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure ...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9737910

The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9737910

The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).

Manufacturer: Cecomp / API Brand: Cecomp / API

Technical Specification Item Differential Pressure Gauge Differential Pressure Range 0 to 8 H20 Rated Total Pressure -20 Hg to 15 psi Connection Size 1/8 NPT Dial Size 3-3/4 Body Material Die Cast Aluminum Scale Type Pressure Accuracy +/-2% Dial Material Die Cast Aluminum Diaphragm Material Silicone Rubber Ambient Operating Range 20 Degrees to 140 Degrees F Includes Instructions, (2) 1/8 NPT Plugs, (2) 1/8 NPT to 3/16 I.D. Rubber Tubing Adapters, (3) Mounting Adapters with Screws Manufacturers Warranty Length 2 yr. This listing is for each.

Manufacturer: Emerson Climate Technologies/Alco Controls Brand: Emerson Industrial Automation

IPR678050, Emerson Climate Technologies/Alco Controls, Emerson Climate (Alco) inlet pressure regulatr 7/8" (evap) 0-50 PSIG 047301

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50426907

The WIKA A-10 pressure transmitter is precision engineered and manufactured to fit many industrial and OEM pressure measurement applications. The rugged design provides resistance to vibration, shock, wide temperature variations, RFI and other extreme environmental conditions that are typical of industrial and OEM applications. Performance and reliability is enhanced by the all stainless steel welded measuring cell that eliminates the need for soft sealing materials that may deteriorate over time. The stateof- the-art manufacturing and assembly process increases the long term reliability of the A-10. Primary applications include process control and automation, hydraulics, pneumatics and machine controls. Pressure ranges: from 0 - 15 psi up to 0 - 10,000 psi. Non-linearity: +/- 0.5% BFSL ( +/- 0.25% available). RoHS-conformity. CE-conformity: Pressure equipment directive - 97/23/EC; EMC directive - 2004/108/EEC (Group 1, Class B) and immunity according to EN 61 326. Shock resistance: 500g according to IEC 60068-2-27 (mechanical shock). Vibration resistance: 10g according to IEC 60068-2-6 (vibration under resonance). Wiring protection: Overvoltage protection: 32 VDC, 36 VDC with 4-20 mA; Short-circuit protection - Sig+ to UB-; Reverse polarity protection - UB+ to UB-. Test pereference conditions according to IEC 61298-1: Relative humidity: 45-75%; Temperature - 59-77 degree F (15-25 degree C); Atmospheric Pressure - 86-106KPa (25.4…31.3 inhg). Weight: Approx. 2.8 oz. (80 g). Supply voltage: 8-30 DC (14-30 VDC). Process connection: 1/4 NPT Male. Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector. 10,000 psi Over pressure safety and 24,650 psi burst pressure.