|
|
-
3.8 of 5.0 with 46 Reviews
SALE PRICE: $37.00 1% OFF
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FRG72J51
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FRG72J51
This Square D Pumptrol 9013FRG72J51 electromechanical pressure switch with 100-80 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1 hp or less pump. The reverse-acting adjustable differential range is 20-75 psi and the cut-out range is 20-30 psi. This switch includes a copper pulsation plug. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
-
3.8 of 5.0 with 8 Reviews
SALE PRICE: $38.66 1% OFF
Manufacturer: DuraChoice
Brand: DuraChoice
Model: PS404L-K15
Manufacturer: DuraChoice
Brand: DuraChoice
Model: PS404L-K15
4" All Stainless Steel Oil Filled Pressure Gauge - 1/4" NPT Lower Mount 15000PSI
-
3.8 of 5.0 with 25 Reviews
SALE PRICE: $39.56 1% OFF
Manufacturer: Panasonic
Brand: Panasonic
Manufacturer: Panasonic
Brand: Panasonic
Board Mount Pressure Sensors -100 kPa 5 mm Pressure Sensor DIP
-
3.8 of 5.0 with 9 Reviews
SALE PRICE: $39.58 29% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Mid-West Instrument quick connect test cock adapter. Designed for hand tight connection of differential pressure test gauges to backflow prevention assemblies. No wrenches or Teflon tape required. 1/4-inches NPT quick connect by 1/4-inches flare. Includes 3 spare o-rings
-
3.8 of 5.0 with 23 Reviews
SALE PRICE: $40.00 1% OFF
Manufacturer: Meriam Process Technologies
Brand: Meriam
Model: A020-0100
Manufacturer: Meriam Process Technologies
Brand: Meriam
Model: A020-0100
AC adapter. 200 - 240 VAC voltage. 50/60 Hz frequency. Pack of 1.
-
3.8 of 5.0 with 39 Reviews
SALE PRICE: $41.00
Manufacturer: CME
Brand: CME Tools
Manufacturer: CME
Brand: CME Tools
4-1/2 x 7" Demagnetizer demagnetizes dies,punches,cutters or any tools which have become magnetized from any sources. Operate on 120V 60 HZ
-
3.8 of 5.0 with 48 Reviews
SALE PRICE: $42.08 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ123
Manufacturer: Winters
Brand: Winters
Model: PFQ123
|
The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...
-
3.8 of 5.0 with 48 Reviews
SALE PRICE: $42.78
Manufacturer: ANALOG DEVICES
Brand: ANALOG DEVICES
Manufacturer: ANALOG DEVICES
Brand: ANALOG DEVICES
ANALOG DEVICES ADM706AR MICROPROCESSOR-MPU SUPERVISOR, 190 uA, 5.5V, 8-SOIC
-
3.8 of 5.0 with 21 Reviews
SALE PRICE: $42.89 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ138
Manufacturer: Winters
Brand: Winters
Model: PFQ138
|
The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...
-
3.8 of 5.0 with 16 Reviews
SALE PRICE: $43.00 1% OFF
Manufacturer: Goodmans
Brand: Goodmans
Manufacturer: Goodmans
Brand: Goodmans
Brand New Part, In Stock
|
|