Pressure & Vacuum - Page 430

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-2002-LCD

The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.

Manufacturer: Honeywell Brand: Honeywell

This item is brand new, but does not include original packaging!

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 301L-404CC

300 series gauge line is a high quality line of Glycerin filled gauges. The Dry filling helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement (and keeping contaminates such as dirt away from all moving parts) which will extend the life of the gauge. This gauge has been specifically designed with original equipment manufacturers in mind. It is typically used in chemical processing or food processing applications as well as any commercial or industrial application where stainless steel components are required.

Manufacturer: Winters Brand: Winters Model: PFP668

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Trerice Brand: Trerice Model: 700SS

The Trerice 700 Series Industrial Gauge is designed for the varying needs of the world’s industrial applications. This gauge has a stainless steel case and ring. Its sturdy interior design and field liquid-fill capability (no kit required) provide the durability and accuracy required for industrial process environments. Available wetted parts are bronze tube with brass socket, stainless steel tube and socket, or Monel tube and socket.

Manufacturer: PERMA-CAL Brand: PERMA-CAL

NEW PERMA-CAL 121TID17Y23 0-10000PSI 1/2 IN NPT PRESSURE GAUGE D531725

Manufacturer: Schneider Electric Brand: Telemecanique Model: XMLP10KPP23

This Telemecanique XMLP10KPP23 pressure transmitter with 0-10,000 psig range and 1/4"-18 NPT male fluid connection uses a Packard Metra-Pack 150 electrical connection to electronically measure and transmit pressure data as 4-20 mA analog output. The compact body is made of 304 stainless steel for corrosion resistance and has thin film technology to work with most fluids, including hydraulic oils, air, fresh water, and refrigeration fluids, as well as fluids and gases that are compatible with 304 stainless steel. The rugged design provides long-term stability, installs easily, and offers high accuracy suitable for industrial applications, such as machine tools, mobile lifts, and HVAC systems. The pressure transmitter has Ingress Protection (IP) 65, 67, and 69K ratings against solid particles and liquids.

Manufacturer: North Coast Electric Brand: Fluke Model: i2500-10

The new Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 1.8m (6') cable. 40 dB External magnetic field rejection. Safety conformance: IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 52294960

The Wika low pressure differential pressure gauge is designed to measure dry, clean non-aggressive gases and air. This instrument is ideally suited to measure differential pressure in filtration systems, pressure monitoring for HVAC, air handlers and ventilation systems and for pressure monitoring of clean rooms, gas scrubbers and dust collection systems. 4-1/2-inches diameter. Case: high-impact polycarbonate. Wetted parts: silicone rubber, polycarbonate. Window: polycarbonate. Dial: white aluminum. Pointer: black aluminum. Accuracy: + 3 percent of span. Mounting: 3 self-tapping mounting screws (standard). Applications: for dry, clean, non-aggressive gases, usually air, fan and blower monitoring, differential pressure monitoring in filters and overpressure monitoring in cleanrooms.

Manufacturer: CME Tools Brand: CME Tools

ER16 COLLET CHUCKS 3/4"X6" W. STRAIGHT SHANK 5pcs---new Tool Holder Set