Pressure & Vacuum - Page 448

Manufacturer: Winters Brand: Winters Instruments Model: STP003

Applications: Mainly used in heating, plumbing, ventilation and air conditioning industries. Facilitates quick pressure and temperature readings at recommended test points within process. Warranty: 1 Year. Material/Body: Lead Free Brass. Diaphragm/Core: NBR (Buna N). Temperature Rating: -40°F to 302°F (-40°C to 150°C). Maximum Pressure Rating: 1,000 psi (6895 kPa). Connection: 1/4” NPT Female. 2.25 OAL x 1.75" x 0.125" Probe.

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 78021

Determine pump efficiency, cut-off and suction, as well as analyze or try troubleshoot burner efficiency. Kit includes 2" gauge, 30" 0-150 lb. scale and 12" hose with fittings.

Manufacturer: Thuemling Instrument Group Brand: SPAN Model: LFS-210-30Hg/600PSI-G

Span gauges are designed for rugged service applications. Liquid fill fluid dampens the gauge pointer movement for improved readings and longer life, making these gauges ideal for high shock and vibration applications. Its Zytel nylon case and ring offer good appearance and excellent resistance to chemical, weather, and corrosion attack. Heavy Duty, Hydraulic, Outdoor, Vibration Service.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FHG12J55M1

This Square D Pumptrol 9013FHG12J55M1 air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 150 psi. The switch has a 1/4" NPSF internal fluid connection and is suitable for use with a lower-horsepower motor with 1.5 hp or less. The non-adjustable differential is 30 psi, and the adjustable cut-out range is 70-150 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. The maintained manual cut-out lever has auto and off positions. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Winters Brand: Winters Model: PFQ810

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: NAHVAC Brand: Aftmk Replm for Coleman

This is a Brand New Gas Furnace Air Switch

Manufacturer: HONEYWELL S&C Brand: Honeywell

Product Overview The 78303-B00000400-14 is a stud mounting Pressure Switch with screw electrical connection. The 5000 series switch is a single-pole single-throw normally closed switch. It features 1/8-inch-27 NPT pressure fitting style. Applications Sensing & Instrumentation Product Specifications, Documents & More Contact Configuration:SPST-NC Electrical Connection:Screw Operating Pressure Max:50psi Operating Pressure Min:25psi Pressure Fitting Style:1/8"-27 NPT SVHC:To Be Advised Sensor Mounting:Stud Switching Current DC Resistive:3A Switching Voltage DC Resistive:6V

Manufacturer: Feasible Solutions Brand: Feasible Solutions Color: Chrome

0 - 5 lb Pressure Gauge with 1/4" NPT pipe connection on top. Allows you to mount directly below your sand heater, and be able to easily read it, right-side-up.

Manufacturer: CME Brand: CME Tools

2 pairs 3/16" & 2 pairs 1/2" thickness precision steel parallel combo set. All 6" long. Made of high quality hardened steel. Precision ground. Within 0.0002" in parallelism. Paired 0.0002" in height Inluding 1 pair of the following heights: 3/16 x 1-----------3/8 hole 3/16 x 1-1/4------7/16 hole 1/2x 1-1/2------1/2 hole 1/2 x 1-3/4 ------1/2 hole Fitted in deluxe plastic box.

Manufacturer: LEGACY Brand: Legacy