Pressure & Vacuum - Page 454

Manufacturer: MAXIM INTEGRATED PRODUCTS Brand: MAXIM INTEGRATED PRODUCTS

MAXIM INTEGRATED PRODUCTS MAX8214BCPE+ MPU SUPERVISOR, 11V, DIP-16

Manufacturer: OMRON INDUSTRIAL AUTOMATION Brand: OMRON INDUSTRIAL AUTOMATION Model: E3FA-RN21

Price for: Each 1 . SVHC:To Be Advised.Sensing Range Max:4m.Sensor Output:NPN.Supply Voltage DC Max:30V.Supply Voltage DC Min:10V

Manufacturer: Winters Brand: Winters Instruments Model: PLP305

The Winters PLP series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case, and a male 1/4" NPT connection, and measures pressure with a single or dual scale with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 2.5" (63 mm) or 4" (100 mm) diameters. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The lens ring is steel. The gauge measures pressure with a single water vacuum scale or a dual scale of psi/kPa or water/oz. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The movement for the 2.5" gauge is an engineering plastic upper and lower plate with brass pinion and sector. The movement for the 4" gauge is brass. The welding is brazed solder. The over-pressure limit is 30% of full scale value. The gauge operates in fluctuating pressure up to 60% of full scale value and status pressure up to 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for vacuum pumps, air compressors, air filters, gas burners, vacuum ovens, suction regulators, and respirators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. F...

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors DIP,Sing Axial Barb 30psi Absolute, 5V

Manufacturer: SMITH METERS Brand: SMITH METERS

SMITH METERS PEX-P1000 PHOTOELECTRIC 1000 PULSE TRANSMITTER 12-24V-DC D528908

Manufacturer: Winters Brand: Winters Model: PFQ703

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: Honeywell Brand: Honeywell

Industrial Pressure Sensors PRESSURE SWITCH

Manufacturer: Winters Brand: Winters Model: PFQ700LF

Applications: Ideal for plumbing, heating, air conditioning, pumps, compressors and pneumatic equipment. Pulsation resistant, liquid filled stainless steel case. CRN registered. Warranty: 5 years. Dial: White aluminum with black and red markings. Lens: Polycarbonate. Fill Fluid: Glycerin. Case: 304 SS. Socket: Lead Free Brass. Bourdon Tube: Lead free phosphor bronze C or coil shaped. Movement: Brass. Socket Gasket: Buna N for two-piece internal socket seal. Working Pressure: Maximum 75% of full scale value. Over Pressure Limit: 25%. Ambient Temperature: -4°F to 150°F (-20°C to 65°C). Dial Size: 4” (100mm). Connection: 1/4” NPT Bottom connect with restricted orifice. Accuracy: 1.5% of Full Scale Value. Range: 30" Vac/KPA

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 251009AWL02L300#

Ashcroft is pleased to reintroduce the 1009AW Duralife pressure gauge. This gauge has been upgraded with many new features outlined above while maintaining the tried and true performance and quality you have come to expect. Duralife 1009AW gauges provide significant features and benefits. New features include a ventable plug that can be sealed or vented depending on your environment and a patent pending through-dial recalibration that reduces recalibration time. The combination of features including the patented PowerFlex movement and optional PLUS Performance dampening system in the 1009AW is the finest gauge technology for vibration, shock and pulsation applications. Available in pressure ranges from vacuum to 1000 psi, including compound and metric ranges

Manufacturer: Winters Brand: Winters Model: PFQ711LF

Applications: Ideal for plumbing, heating, air conditioning, pumps, compressors and pneumatic equipment. Pulsation resistant, liquid filled stainless steel case. CRN registered. Warranty: 5 years. Dial: White aluminum with black and red markings. Lens: Polycarbonate. Fill Fluid: Glycerin. Case: 304 SS. Socket: Lead Free Brass. Bourdon Tube: Lead free phosphor bronze C or coil shaped. Movement: Brass. Socket Gasket: Buna N for two-piece internal socket seal. Working Pressure: Maximum 75% of full scale value. Over Pressure Limit: 25%. Ambient Temperature: -4°F to 150°F (-20°C to 65°C). Dial Size: 4” (100mm). Connection: 1/4” NPT Bottom connect with restricted orifice. Accuracy: 1.5% of Full Scale Value. Range: 0-100 psi/KPA