Pressure & Vacuum - Page 488

Manufacturer: Amphenol Advanced Sensors Brand: Amphenol Advanced Sensors

Board Mount Pressure Sensors 15 PSIG GAUGE

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2-5000-500PA

Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2-5060

Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.

Manufacturer: Winters Brand: Winters Model: PFP931

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF450-150-RT

Cf4.5 knife edge seal flange is similar to Conflat /Del-Seal flange. It is a bored flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Nason Brand: Nason Model: SQ-1

The Nason SQ-1 low pressure switch is perfect for OEM applications looking for a low cost pressure switch with easy adjustability and high cycle life. The SQ-1 has an adjustable range of 2-10 PSI and a 10-20% differential.

Manufacturer: Winters Brand: Winters Model: PFP853

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: ROHM Brand: Rohm

ROHM BD4848G-TR VOLTAGE DETECTOR, 900NA, 10V, SOT-23-5

Manufacturer: Kavlico Brand: Kavlico

Board Mount Pressure Sensors PCB mount pressure sensor 2" H2O, 0.25 - 4 Vdc output

Manufacturer: JOHNSON CONTROLS Brand: Johnson Controls

' Differential Air Pressure Switch, HVAC/General Purpose, Differential (In. WC) .009 To .075, SPDT Switch Type, Pressure Setting Range (In. WC) 0.05 T0 5.0, Electrical Rating 5.8 Amps @ 120, Sample Line Connector 1/8 In. - 27 NPT, Height (In.) 5-5/8, Width (In.) 3-1/4, Depth (In.) 2-1/8, Duct, Operating Temp. Range (F) -40 to 165, Includes Barb Fitting /LP Port - 4 Ft. x 1/4 In. Probe Kit '