Pressure & Vacuum - Page 492

Manufacturer: Amphenol Advanced Sensors Brand: Amphenol Advanced Sensors

Board Mount Pressure Sensors 30 PSI Differential

Manufacturer: PANASONIC ELECTRIC WORKS Brand: Panasonic

PANASONIC ELECTRIC WORKS DP-001-J Pressure Sensor, Low Pressure, 100 kPa, Gauge, M5, NPN Open Collector, 24 VDC, 30 mA

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-901-250-bar/psi-BSPP

The NoShok 900 series stainless steel 304 case pressure gauge has brass wetted parts, a liquid-filled circular dial, a variety of connection types available, and measures pressure with a dual scale with an accuracy of + or - 1% or 1.5%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The dial is 2.5" (63 mm) or 4" (100 mm) in diameter and enclosed in a stainless steel 304 case for corrosion resistance. The gauge has a safety relief disc on the top of the case. The lens for the 2.5" gauge is polycarbonate for high impact resistance. The lens for the 4" gauge is instrument glass for strength and clarity. The dial is filled with glycerin and water for protection against vibration and pulsation. The dial has a white aluminum background with black and red markings and is UV resistant. The 2.5" gauge has a molded plastic pointer. The 4" gauge has a balanced aluminum pointer with a black finish. The gauge measures pressure with a dual scale in psi/kPa, Hg. vacuum/kPa, bar/psi, or Hg. vacuum/bar. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade A accuracy class. The 4" gauge is accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. The male connection is located on the bottom or center back of the gauge and is available with a 1/4" NPT (National Pipe Thread) rate, a 1/2" NPT rate, a 1/4" British Standard Pipe Parallel thread (BSPP) rate, or a 7/16" to 20" adjustable 1/8" rate. The movement is brass and nylon with highly polished bearing surfaces. The bourdon tube is phosphor bronze C-Type for gauges with up to 600 psi and a coiled safety tube for gauges above 600 psi. The gauge operates in fluctuating pressure up to 60% of the dial range and in static pressure up to 90% of the dial range. The ambient temperature for the gauge is -4 to 140 degrees F (-20 to 60 degrees C). The media temperature range is -4 to 140 degrees F (-20 to 60 degrees C). This pressure ga...

Manufacturer: Anfield Sensors, Inc. Brand: Anfield Sensors Model: SMA-8-4M-C-HC

The SMA high pressure switch is a versatile pressure switch suitable for many hydraulic and pneumatic applications. It utilizes a proven piston/diaphragm design to provide excellent accuracy and high proof pressures with zero leakage. If an application requires a high quality snap action micro switch the SMA is a perfect choice.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 120-AA-00-O(CA)

Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One switch in standard enclosure with 1/4-inches FNPT electrical connection NEMA 4X. SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 10-90 percent).

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2301

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: CME Brand: CME Tools

Accuracy 0.0012" to 0.0039" MADE OF HARDENED TOOL STEEL AND GROUND FOR HIGH ACCURACY. PRECISION AND HIGH QUALITY NEEDLE BEARINGS FOR ACCURACY. PARTS ARE SEALED CONCENTRICITY: 0.0002"

Manufacturer: Winters Instruments Brand: Winters Instruments Model: NVA9001

Winters NVA Series Needle Valve. Angle Body, Hard Seat. Ideally suited for severe duty oil and gas installations including refineries and processing plants, water treatment plants, power plants and hydraulic applications. ASME B1.20.1 compliant. Material: Stainless Steel. NPT Connection: 1/2" Male x 1/2" Female. Max Pressure: 10,000 psi.

Manufacturer: Winters Instruments Brand: Winters Instruments Model: NVA9020

Winters NVA Series Needle Valve. Angle Body, Hard Seat. Ideally suited for severe duty oil and gas installations including refineries and processing plants, water treatment plants, power plants and hydraulic applications. ASME B1.20.1 compliant. Material: Stainless Steel. NPT Connection: 1/4" Female x 1/4" Female. Max Pressure: 10,000 psi.

Manufacturer: Ametek Gemco Brand: Ametek Gemco

Ametek Gemco GaugeAir Pressure GaugeBottom Connection, 1.4 NPT0 to 160 PSI(1LBS)    H  3.00"    L  4.00"   W  4.00"