Pressure & Vacuum - Page 496

Manufacturer: Winters Brand: Winters Instruments Model: PPC5063R1

The Winters PPC series pressure gauge with stainless steel 316L wetted parts has a circular dial enclosed in a phenolic case, and a male connection, and measures pressure with either a single or dual scale with an accuracy of + or - 0.5%. The stainless steel 316L wetted parts provide corrosion. The black phenolic case is durable and Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The dial is 4.5" (115 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The gauge has a durable phenolic case with a solid front and blowout back for operator safety. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer that is micrometer-adjustable for ease of calibration. The lens is polycarbonate for high impact resistance and has a phenolic lens ring. The gauge measures pressure with either a single scale of psi or Hg. vacuum or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and is either a 1/4" or 1/2" NPT (National Pipe Thread) rate. The movement is stainless steel 304 with under- and overload stops to protect the gauge system. The restrictor screws reduce shock to the gauge and prevent wear on the movement. The welding is tungsten inert gas (TIG) for strength. The bourdon tube is drawn seamless stainless steel 316L for additional strength. The gasket is made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1500 psi/kPa, 15% for pressures 1501 to 8700 psi/kPa, and 10% for pressures above 8701 psi/kPa. The operating temperature is -40 to 200 degrees F (-40 to 93 degrees C) dry and -4 to 150 degrees F (-20 to 65 degrees C) when filled with glycerin. This pressure gauge is suitable for corrosive media in process, chemical, and petroleum industries.Pressure gauges are ...

Manufacturer: Ashcroft Brand: Ashcroft

Ashcroft 1379 Duragauge® Plus Pressure Gauge 0-60 PSI 1BA45345-007 #60, inlet is on the back 1/4 NPT

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors UNAMP +/-5psi VAC GAGE GAGE

Manufacturer: CME Brand: CME Tools

PATENTED GRIPLOCK PRINCIPLE ELIMINATES TILT OF MOVEABLE JAW WHEN IT IS CLAMPED AND ALSO TAKES UP WEAR. FOUR JAW PLATE POSITIONS ALLOW EXTRA CAPACITY WITH JAW PLATES IN THE OUTSIDE POSITION. ALL IMPORTANT SURFACES PRECISION GROUND. MAX. JAW OPENING: 6" JAW WIDTH: 6" JAW HEIGHT: 1-5/8" O.A.L: 18". OVERALL HEIGHT: 6-1/2" W.T: 105 LBS

Manufacturer: CME Brand: CME Tools

30pcs/set C-clamps 5" heavy duty, originally made for Pony Tool Co.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 628-07-CH-P1-E5-S1

The Dwyer Series 628 Pressure Transmitters are ideal for OEM's with 1% full scale accuracy sensors. The transmitter is also available in the general purpose stainless steel housing and the cast aluminum conduit housing.

Manufacturer: Winters Brand: Winters Model: PPS5048Z

Stabilizr dampened movement minimizes effects of pulsation and vibration without liquid filling. Full safety pattern solid front, blowout back. Stainless steel full rotary movement. Micrometer pointer for ease in calibration. 5 Year warranty. Micrometer pointer for ease in calibration. Under and overload stops. 316L Stainless steel wetted parts standard. Restrictor screws standard on dual scale. CRN registered. Dial: 4.5" aluminum with black and red markings. Case: black phenolic with safety blowout back, solid front, integral back flange. Solid wall: phenolic. Lens: polycarbonate. Ring: Phenolic. Pointer: aluminum, anodized black, micrometer adjustable. Socket: 316L stainless steel. Connection: 1/4" NPT. Bourdon tube: 316L stainless steel. Movement: 304 stainless steel protected with over/under stops (stabilized). Gasket material: silicone. Welding: TIG. Over-pressure limit: 25 percent for pressures up to 1500 psi/kPa. Working pressure: maximum 75 percent of full scale value. Ambient/process temperature: -4 degree to 200 degree fahrenheit (-40 degree celcius to 93 degree celcius). Accuracy: +/- 0.5 percent ANSI/ASME Grade 2A. Enclosure rating: IP65. Used where operator safety is a must. Ideally suited for process, chemical and petroleum industry applications where chemical compatibility and contamination is a concern. Process where pulsation or vibration exist. 0-400 psi/KPa.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-500-30/60-psi

The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50807099

The WIKA differential low pressure gauge has a circular dial that is 4" in diameter and is enclosed in a thermoplastic case with a polycarbonate window for increased durability in low temperature environments. The gauge measures pressure from 0.02 to 50 inch water column (inWC) and is accurate to + or - 3 percent of span over the entire range of the gauge. The female connection is a hosed barb that is made of plastic for increased durability. The gauge can be mounted and dismounted easily without the use of tools. The low pressure gauge is suitable for measuring differences of pressure in isolation chambers and for monitoring blowers and ventilators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards...

Manufacturer: Thuemling Industrial Products Brand: Duro Model: 4207-1033-CERT

Duro Pressure Gauge is NIST Certified with 3 point certificate of calibration for ISO and test applications with 0.5% full scale accuracy ASME B40.100 Grade 1A accuracy class. Large 4.5" dial allows easy viewing and precise readings. High quality Stainless Steel case, 316 Stainless Steel 1/2" NPT connection and pressure system, for use with any liquid or gas that is compatible with 316 stainless steel.