|
|
-
3.5 of 5.0 with 40 Reviews
SALE PRICE: $42.89 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ111
Manufacturer: Winters
Brand: Winters
Model: PFQ111
|
The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...
-
3.5 of 5.0 with 41 Reviews
SALE PRICE: $42.99
Manufacturer: Midwest Control
Brand: Midwest Control
Model: 9013FHG-42J59M1X
Manufacturer: Midwest Control
Brand: Midwest Control
Model: 9013FHG-42J59M1X
Application: Used to Regulate the Tank Pressure Between Two Preset Values on Small Electrically Driven Air Compressors Up to 230 PSI. UL Listed CSA Certified RoHS Compliant, NEMA 1 Enclosure, Optional 3R Enclosure Available, Rated for Both 50/60Hz Operation. Adjustable Cut Out Pressure, Fixed Differential, Contacts Open On Pressure Rise, Electrical Connection: 2 - 1/2 NPT Conduit Entries, Diaphragm Actuated, 2 Pole Snap Action Contacts, Feature Drift Proof Cut In and Cut Out Settings, Easy Inspection With Vertical Contacts, Extra Strong Frame that Resists Distortion When Mounting the Switch to a Compressor, Temperature Range : -22°F to 257°F
-
3.5 of 5.0 with 5 Reviews
SALE PRICE: $43.03 1% OFF
Manufacturer: Antunes Controls
Brand: Antunes Controls
Manufacturer: Antunes Controls
Brand: Antunes Controls
SMD4204107, Antunes Controls, Air Pressure Switch
-
3.5 of 5.0 with 8 Reviews
SALE PRICE: $45.00 1% OFF
Manufacturer: CME Tools
Brand: CME Tools
Manufacturer: CME Tools
Brand: CME Tools
Universal Right Angle Plate 4x5x6" smi-steel castings accurate ground URAPMade of fine quality, fine grained semi-steel castings, stress relieved against distortion by proper heat treatment. All surfaces closely finished for square and parrallel references. Ground finish: 0.0005' per 6" 4"(L)x5"(W)x6"(H) Weight: 36 lbs
-
3.5 of 5.0 with 23 Reviews
SALE PRICE: $45.54 1% OFF
Manufacturer: Merit Sensor
Brand: Merit
Manufacturer: Merit Sensor
Brand: Merit
Industrial Pressure Sensors Pressure sensor, 30 psig, face seal, analog, Vdd = 4.5 - 5.5V, 2.5%, -40 - 150C
-
3.5 of 5.0 with 27 Reviews
SALE PRICE: $45.99 1% OFF
Manufacturer: Dwyer
Brand: Dwyer
Manufacturer: Dwyer
Brand: Dwyer
Dwyer 1823-1-2-S Pressure Switch Series 1800 10PSI 15A 125/250/480VAC
-
3.5 of 5.0 with 16 Reviews
SALE PRICE: $46.00 1% OFF
Manufacturer: Merit Sensor
Brand: Merit
Manufacturer: Merit Sensor
Brand: Merit
Industrial Pressure Sensors Pressure sensor, 300 psia, radial seal, analog, Vdd = 4.5 - 5.5V, 2.5%, -40 - 150C
-
3.5 of 5.0 with 24 Reviews
SALE PRICE: $47.19 1% OFF
Manufacturer: Panasonic
Brand: Panasonic
Manufacturer: Panasonic
Brand: Panasonic
Board Mount Pressure Sensors +/-100 kPa 3 mm Pressure Sensor SMD
-
3.5 of 5.0 with 3 Reviews
SALE PRICE: $48.45 4% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5000-0
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5000-0
|
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.
-
3.5 of 5.0 with 1 Reviews
SALE PRICE: $49.29 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: SFI-550-2
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: SFI-550-2
Fused glass style sight windows feature glass to metal bond for utmost reliability. Plated steel bodies have convenient hex wrench surfaces. Connections are standard NPT in sizes from 1/4" to 2". Windows are clear, ripple free, and flush with the front face, having no recess on which dirt might collect.
|
|