Pressure & Vacuum - Page 533

Manufacturer: Parker Brand: Parker Model: 06E26A13AC

This Parker 06E compact series compressed air filter/regulator is for water and particulate removal, and air pressure control. This filter is a single-unit, integral, "piggyback" filter/regulator for space-saving installations and has a relieving-style regulator to exhaust excess pressure for increased performance and safe operation. It has a removable, non-rising knob for tamper resistance and male National Pipe Taper (NPT) threads for connecting to female threaded pipes. Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies.

Manufacturer: coinbuylot Brand: coinbuylot

Product Description:     Measurement Range: 0-5m H2O / 50kPa;     Cable Length: 6M     Measurement Medium: Water;     Power Supply: 9-32VDC;     Output Signal: 4-20mA;     Accuracy: ±0.5%FS;     Overload Capacity: Two times full-scale pressure;     Temperature Range: -10℃-80℃;     ZTC: (typical):±0.02%FS/℃;     STC: (typical):±0.02%FS/℃;     Long-term Stability: (typical):±0.1%FS/year;     wateroriif Class:IP68     Load Resistance: ≦(U-10)/0.02Ω;     Shell Material: 316L stainless steel;     Explosion-proof Type: Exia II CT6. Caution: 1,The measurement medium should be compatible with stainless steel; 2,Don't connect the wires when the power is on,connect the power after checking the connection wires; 3,Shell and power should be connected with earth;don't change the welded parts and connected wires of the outgoing products when customer use it; 4,Sensor is related to the precision device,don't disassemble,and what's more,don't touch the diaphragm,in case of break. Package Included: 1×Water Level Transmitter

Manufacturer: Ashcroft Brand: Ashcroft

Gauge is ideal for use where ambient corrosion is a concern. Designed with stainless steel case and ring that offers excellent resistance to chemical, weather, and corrosion attack. Features 4-1/2" dial for differential low-pressure applications. This listing is for each. Technical Specification Differential Pressure Gauge Type Differential Pressure Gauge Item Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts PTFE / Buna-N Differential Gauge Connection Type FNPT Differential Gauge Connection Size 1/8 Gauge Connection Location Back and Side Differential Pressure Range Units In. H2O Differential Pressure Range Value 0 to 0.60 Gauge Accuracy +/-3.00% Body Material Glass Filled Nylon Gauge Primary Range Smallest Graduation 0.02 Diaphragm Material Buna-N Piston Material PTFE Seal Material Buna-N Gauge Operating Temp. Range 0 Degrees to 140 Degrees F Rated Total Pressure 35 psi Dial Material Stainless steel Scale Type Pressure Includes Instructions Manufacturers Warranty Length 5 yr.

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: SG25CTC15P21

Reotemp’s sanitary pressure gauges are specially designed to meet the demanding sanitary requirements of the brew industry. The quick connecting Tri-clamp design allows for fast removal and installation of instruments. Ideal for clean-in-place applications or equipment washdowns. The SG series is designed to meet 3-A sanitary standards. All welded 316 stainless steel tube, socket, seal, and diaphragm. Accuracy: standard seal: 1.5 percent for ranges 100 psi and above 2 percent for compound and below 100 psi ranges. Fractional seal: ranges 60 psi and above 2.5 percent up scale, up to 4 percent downscale. Made in the USA.

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: SG25CTC15P21

Reotemp’s sanitary pressure gauges are specially designed to meet the demanding sanitary requirements of the brew industry. The quick connecting Tri-clamp design allows for fast removal and installation of instruments. Ideal for clean-in-place applications or equipment washdowns. The SG series is designed to meet 3-A sanitary standards. All welded 316 stainless steel tube, socket, seal, and diaphragm. Accuracy: standard seal: 1.5 percent for ranges 100 psi and above 2 percent for compound and below 100 psi ranges. Fractional seal: ranges 60 psi and above 2.5 percent up scale, up to 4 percent downscale. Made in the USA.

Manufacturer: Shenzhen TEREN Control Technology Co., Ltd. Brand: TEREN Model: DPGT4111

 Apply high accuracy MEMS sensor and digital technologies, can measure positive, negative or differential pressure, and supply local display and output simultaneously.  It can measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels of bubbler systems and pressure amplifier or hydraulic system.  It can be used in medical care equipment to monitor blood and respiratory pressures.  Suitable for surface, panel or flush mount  Multiple ranges, outputs and engineering units selectable  No any movable parts, no any effect on vibration  The accuracy is up to ±1%  Function keys: zero/range calibrate, units select, relay set, output calibrate, etc

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616-5

Series 616 Transmitter features an exceptional ±0.25% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).