|
|
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $44.95 1% OFF
Manufacturer: Siemens
Brand: Siemens
Manufacturer: Siemens
Brand: Siemens
Designed to be the most adaptable switch on the market, the 69J offers the user the flexibility to build the pressure switch around the compressor-not the other way around.The unloader can be mounted on either side, and can be rotated to any of eight different positions allowing for quicker assembly and shorter tubing. Bottom cable entry is also available with unique built-in clamping strain relief for even quicker assembly. With thousands of variations right off the production line, the 69J provides maximum flexibility at minimum cost. With UL, CSA and CE approvals, the 69J is designed to be sold anywhere in the world.
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $62.98 1% OFF
Manufacturer: PneumaticPlus
Brand: PneumaticPlus
Manufacturer: PneumaticPlus
Brand: PneumaticPlus
|
PneumaticPlus offers quality Air Preparation Units for various pneumatic applications. SAR Series Regulators offer stable air flow with locking adjustment knob to prevent accidental setting changes. SAR Modular Series Regulators can connect to SAF Modular Series Air Filters & SAL Modular Series Air Lubricators using our brackets to form a fully functional FRL unit. SAF Series Filters and SAL Series Lubricators are available on Amazon.com for purchase along with other PneumaticPlus Air Preparation Units. PneumaticPlus.com SAR2000M-N02-IP miniature regulator has a die-cast aluminum body with a high-impact plastic adjustment knob for durability and resistance to corrosion, and is suitable for regulating pressure on compressed air lines in the range of 0 to 30 pounds per square inch (psi). It has a maximum temperature of 250 degrees F and a maximum inlet pressure rating of 250 psi. It comes with 1/4" female National Pipe Thread (NPT) connections for connecting to an air hose, and a gauge (1-1/2" Dial 0-60PSI) for monitoring downstream air pressure. This compressed air regulator is suitable for industrial and commercial pneumatic pressure regulation applications where space is limited and flow requirements are low.
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $65.27 2% OFF
Manufacturer: Anfield Sensors, Inc.
Brand: Anfield Sensors
Model: SPA-2-4M-C-HC
Manufacturer: Anfield Sensors, Inc.
Brand: Anfield Sensors
Model: SPA-2-4M-C-HC
The SPA series switch is a compact pressure switch utilizing a high quality snap action micro switch for applications in which price and size are of concern. Suitable for pneumatic, water and low pressure hydraulic applications.
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $126.95 1% OFF
Manufacturer: Siemens Energy & Automation (Furnas)
Brand: Siemens Energy & Automation (Furnas)
Manufacturer: Siemens Energy & Automation (Furnas)
Brand: Siemens Energy & Automation (Furnas)
69WR3, Siemens Energy & Automation (Furnas), PRESSURE SWITCH
-
3.0 of 5.0 with 11 Reviews
SALE PRICE: $129.99 1% OFF
Manufacturer: Robinair
Brand: Robinair
Model: 11910
Manufacturer: Robinair
Brand: Robinair
Model: 11910
The Robinair 11910 automatically performs pressure/temperature calculations for up to 17 different refrigerants. It's compact design, large display, and bright back light provide technicians with accurate readings and ease of use in any location. Compatible with numerous manifolds.
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $169.50 1% OFF
Manufacturer: Supco
Brand: Supco
Model: VG64S
Manufacturer: Supco
Brand: Supco
Model: VG64S
|
With resolution as low as 1 micron and 1/2 second response time, Provides accurate measurements, fast. It makes evacuating a system easy. Applications: vacuum measurements during system evacuation, high precision laboratory tests. Sensor Type: Thermistor. Connector Type: Standard 1/4 inch male flare fitting. Vacuum Range: 0 - 12000 Microns (0 - 1600 Pascals) with vacuum increasing/decreasing indicator when above 12000 Microns. Scale: Microns, PSI, InHg, milliBars, Pascals, Torr, milliTorr. Resolution: 0-200: 1 Micron, 201-500: 5 Microns, 501-1,000: 10 Microns, 1001-2000: 50 Microns, 2001-5000: 250 Microns, 5001-8000: 500 Microns, 8001-12000: 1000 Microns. Operating Temperature Range: 35 degree F to 125 degree F (2 degree C to 52 degree C). Overpressure: 500 psi max. Accuracy: +/-10 percent. Power Source: 9 Volt Alkaline Battery (not included). Continuous Usage: 30 Hours (approximate). Auto Shutoff: After 10 minutes when vacuum reading is above 12000 Microns (12 Torr). Measures 3" length by 1-1/4" width by 5-1/2" height, 1 year warranty. Single port connection.
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $169.96 15% OFF
Manufacturer: Test Products International, Inc
Brand: TPI
Model: 621
Manufacturer: Test Products International, Inc
Brand: TPI
Model: 621
High efficiency gas and oil fired furnaces along with condensing boilers require a manometer with 0.001 inches of water resolution to make proper adjustments. 0.001 inH2O resolution at less than 40 inH2O; 0.01 inH2O resolution over 40 inH2O. Temperature compensated to ensure repeatable measurements. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg. Trim mode to stabilize readings. Auto power off after 20 minutes. +/- 0.2 percent accuracy. 300mbar over pressure. 32 to 104 degree F operating temperature. RoHS compliant.
-
3.0 of 5.0 with 6 Reviews
SALE PRICE: $182.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 478A-0
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 478A-0
|
The Dwyer Series 478A digital manometer provides positive, negative, and differential pressure measurements, and is used to perform single-pressure measurements and to set supply pressures, verify pressure switch operation, adjust regulators, check pneumatic systems, and computer peripherals. The meter is suitable for use with air and compatible gases, and has an accuracy of + or - 1.5% of full scale. The extruded aluminum case provides durability. The four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring, min/max display provides comparative data, and display hold retains last reading when the display cannot be seen during testing. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible gasesCase materialExtruded aluminumPressure unitsinH2O, mmH2O, bar, mbar, psi, inHg, mmHg, kPaConnection type3/16" or 1/4" inside diameter (ID) tubingMaximum pressure5 gauge psiDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of liquid, and they use gravity and the liquid's density to calculate pressure. Because they have no moving part...
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $182.11 2% OFF
Manufacturer: Kodiak Controls Inc.
Brand: SSI Technologies
Model: DFT-110
Manufacturer: Kodiak Controls Inc.
Brand: SSI Technologies
Model: DFT-110
Ultrasonic digital drum level gauge can measures 15, 30, or 55 gallon drums at superb 2% accuracy. It comes with 2" and 3/4" bung attachments and is battery operated.
-
2.6 of 5.0 with 3 Reviews
SALE PRICE: $12.37 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PETG201
Manufacturer: Winters
Brand: Winters
Model: PETG201
Economical pressure gauge and valve body assembly used for pressure testing. Bleed port and plated housing on the gas test assembly. Black steel case. 5 year warranty. Single scale (psi). CRN registered. Applications: residential and commercial pressure testing of gas, air and water lines. Case: steel painted black. Lens: polycarbonate. Ring: steel, painted black. Bourdon tube: phosphor bronze. Movement: brass. Pointer: aluminum, black. Maximum pointer: available on water test gauge only. Welding: #50 tin solder. Working pressure: maximum 75 percent of full scale value. Accuracy: +/-3-2-3 percent ANSI/ASME Grade B. Enclosure Rating IP52. 0-15 psi. 2" Dial display. Connection: 3/4" FNPT. Ambient/process temperature: -40/150 degree F. Gas Test: 40/150 degree F.
|
|