Pressure & Vacuum - Page 58

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: THSP201ACBG

THS series transmitters are compatible with Reotemp DM series digital indicators. Each Reotemp transmitter is inspected and calibrated prior to shipment, to ensure it is 100 percent Ready-to-Go right out of the box. Output signal: 4-20mA, (2 wire) (Std). Pressure ranges: vacuum, compound, pressure 0/2 to 0/1000 PSI gauge and absolute. Ranges 60psi and below not recommended with 3/4" tri-clamp. Accuracy: +/- 0.5 percent. Process connection: 1.5" triclamp. Electrical connection: mini Hirschman (no cable). Fill fluid: glycerin (std). Made in the USA.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1000-000-NT

Cf10 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: T27M0242EW3000#G

The T2 employs a polysilicon thin film sensor with a proven long term stability. The sensor is electron beam welded to a stainless steel pressure fitting to ensure high overpressure ratings and integrity in high shock, vibration and pressure cycling applications. Through the use of a high performance ASIC and modern digital compensation techniques the T2 provides extraordinary performance over temperature. The graph that follows depicts the performance over temperature on a Total Error Band basis – the Total Error Band includes not only temperature effects but also nonlinearity, hysteresis and non-repeatability.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MP-10PSI

Differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching set points. The Mini-Photohelic switch/gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gage. Set points are adjusted with push buttons on back of unit. This extremely compact switch/gage is ideal for fume hoods, dust collection, pneumatic conveying and clean room applications.

Manufacturer: PERMA CAL INDUSTRIES Brand: PERMA CAL INDUSTRIES Model: 123NIR04A21LZ

Perma-Cal P/N 123NIR04A21LZ (Dial Trim: Dampening | Misc. Options: Tempered Glass Lens, Aluminum Case) Perma-Cal® Industries, Inc. has been a leader in quality and design of Direct Drive (helically wound bourdon tube) pressure gauges for over 35 years. Reliable in the most rugged environments, Perma-Cal® Industrial Gauges are designed to withstand hostile applications, including intense vibration, shock, pulsation and overpressure. Design standards meet or exceed most industrial, aerospace & military specifications. What's the Difference? | Superior Reliability: Manufactured using Direct Drive technology, Perma-Cal® Pressure Gauges feature a helically would bourdon tube, only one moving part, no gears, linkages, or springs to wear or break, and no liquid fill. This allows the gauge to endure rugged conditions unsuited for traditional c-tube type gauges. Perma-Cal® gauges can also withstand a 50% overpressure without going out of calibration. | No Liquid Fill: Perma-Cal® provides a longer life gauge than liquid filled gauges without the leaking or discoloring problems of liquid fill. Perma-Cal® gauges are internally dampened to eliminate pointer flutter. | 100% American Made: Proudly, Perma-Cal® manufactures its industrial pressure gauges in Minden, NV using only American made parts. Aspects of the manufacturing process not completed in house are outsourced to support local small businesses. | Reduced Cost of Ownership: In addition to reduced risk of failure by having only one moving part, Direct Drive design produces a gauge which withstands more cycles and outlasts its competitors significantly reducing the ongoing cost of ownership. | Safety Comes Standard: Perma-Cal® Pressure Gauges are designed to the utmost standard of safety. A very low volume elastic element, rear blowout features and a solid front case produce the safest gauge possible. Also, not all Direct Drive gauges offer a solid front case.

Manufacturer: Johnson Controls Brand: Johnson Controls

Technical Specification Item Electronic Pressure Transducer Range 0 to 750 psi Accuracy +/- 1% Output 4 to 20 mA Power Required 12 to 30 VDC Process Connection 1/4 SAE Flare Internal Thread Electrical Connections Packard with Wiring Harness Lead Length (In.) 78 Wetted Materials 17-4PH Stainless Steel Construction Housing 17-4PH Stainless Steel Construction Operating Temp. -40 to 185 Degrees F NEMA Rating 7 - Class 1, Division 2, Groups A, B, C, and D Loop Resistance Minimum Between Transducer Body and Any Wire, 100 MOhms @ 500 Vdc For Use With Any Corrosive or Non-Corrosive Pressure Medium That is Compatible With 17-4PH Stainless Steel, Including Water, Condensate, Carbon Dioxide, Glycol, Most Refrigerants Including Ammonia, and Many Other Compatible Fluids and Gases Compatible With All Media Compatible with 17-4PH Stainless Steel, Including Ammonia Manufacturers Warranty Length 3 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 0 to 30 psi Accuracy +/-0.5% Full Scale Output 4 to 20 mA at 12 to 30VDC Power Required 9 to 36VDC Process Connection 1/4 NPT Male Electrical Connections DIN 43650-A Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 60 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316 Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 4375285

The WIKA differential pressure gauge has stainless steel 316L wetted parts which resist corrosion against chloride, and a dial that is enclosed in a thermoplastic case for increased durability in low temperature environments. The gauge measures pressure up to 100 pounds per square inch differential (psid) and 400 inches of water (inH2O), and is accurate to + or - 2 percent of span over the entire range of the gauge. The female connection is mounted on the back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in applications that require measuring high differential and static process pressures. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards for ...

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 800-50/400-1-1-8-8-090-6

The NOSHOK Series 800 temperature transmitter provides an unbeatable level of performance at an economical price. Using the proven reliability and stability of 100 ohm platinum resistance technology, this transmitter offers a broad array of choices for the OEM and user alike. A rigorous test and inspection process is performed on all NOSHOK temperature transmitters prior to shipment to further ensure 100 percent "out of the box" reliability. Applicable for water systems, storage tanks, industrial machinery and machine tools, HVAC systems, refrigeration systems. +/-0.5 percent BFSL Accuracy. Burnout protected from 4 mA to 20 mA, 2-wire Output signals Sensor protection. 1/2" NPT male Process connections. Hirschmann (DIN EN 175301-803 Form A) Electrical connections. +/-0.5 percent Full scale. 10 to 30 VDC Power supply. Equal-to or less than VPower -10)/0.020 Amps Load. 316 Stainless steel wetted and housing material. -40 to 185 degree F Ambient Storage temperature. IP65 according to EN 60529/IEC 529 Environmental rating. CE compliant to EMC norm EN 61326:1997/A1:1998 RFI, EMI and ESD protection. Reverse polarity, over-voltage and short circuit protection. Simple 2-key programming for set points, contact functions (N.O./N.C.), reset points, contact types (npn/pnp) and switching function (hysteresis/gate). Integrated password protection. Four-digit LED display. Scalable analog output. Fast response time. Reverse polarity, over-voltage and short circuit protection. Stem measures 6mm diameter by 9" length.

Manufacturer: SPX Brand: SPX

Power Team SPX KMT350238 GAUGE, PRESSURE 4" DRY 0-59k LBS 1/4 NPT