Pressure & Vacuum - Page 63

Manufacturer: gauge Brand: gauge Model: LFSL-2-30 GAUGE

- Stainless Steel Case And Bezel - Brass Internals & Connection - Phosphor Bronze Bourdon Tube - Plastic Lens Standard - Glycerine Filled The Glycerine Filling Helps Dampen The Effects Of Pulsation And Vibration, While Also Perpetually Lubricating The Movement (And Keeping Contaminates Such As Dirt Away From All Moving Parts) Which Will Extend The Life Of The Gauge. This gauge has been specifically designed with the original equipment manufacturers in mind and are typically used on hydraulic & pneumatic systems as well as any commercial or industrial application not corrosive to brass and bronze wetted parts where glycerine filling is suitable for use

Manufacturer: American Granby Brand: American Granby

These standard pool filter system gauges are designed for long and reliable service under rugged conditions. All gauges feature the standard 1/4 in. NPT brass fitting used in most pool equipment.

Manufacturer: FREESCALE SEMICONDUCTOR Brand: Freescale Semiconductor

Price for: Each 1 . Connection Size: 4. 928mm. MSL: -. No. of Pins: 4. Operating Pressure Max: 100kPa. Operating Pressure Min: 0kPa. Operating Temperature Max: 125C. Operating Temperature Min: -40C. Operating Temperature Range: -40C to +125C. Pressure Type: Absolute. SVHC: No SVHC (20-Jun-2013). Sensitivity, V/P: 0. 4mV/kPa. Sensor Case Style: SIP. Supply Current: 6mA. Supply Voltage Max: 16V. Supply Voltage Min: 10V

Manufacturer: Winters Brand: Winters Model: PEM200

The Winters PEM series pressure gauge with brass wetted parts has a circular dial enclosed in a plastic case and a lower mount male connection with 1/4" NPT rate, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial is 2" (50 mm) in diameter. The dial has an aluminum black pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The bourdon tube is phosphor bronze, the movement is brass, and the welding is silver alloy. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for plumbing, heating, air conditioning, pneumatic, hydraulic, water tanks, and air compressors.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as w...

Manufacturer: Robinair Brand: Robinair Model: 11794

The Robinair 11794 is a universal compound replacement gauge. It features PSI/kPa pressure readings, R-22 and R-134a temperature readings in degrees Fahrenheit. Replacement gauge (replaces 11692).

Manufacturer: Fluke Corporation Brand: Fluke Model: 871207

Digital multimeter replacement fuse. Nominal current: 1A. Maximum voltage to ground: 600V.

Manufacturer: Winters Brand: Winters Model: PFQ802

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: Interstate Pneumatics Brand: Interstate Pneumatics Model: LF10-1H

Interstate Pneumatic Generic pressure switch LF10-1H fits Emglo, DeWalt, Hitachi and many other compressors.

Manufacturer: Miljoco Brand: Miljoco Model: PLF2598L005

2.5" Glycerin-filled pressure gauge, stainless steel case, crimped ring, brass internals, 1/4" NPT LM, 30"-0-100 PSI/Bar.

Manufacturer: ZIYUN Brand: ZIYUN

The Grove UV Sensor is used for detecting the intensity of incident ultraviolet(UV) radiation. This form of electromagnetic radiation has shorter wavelengths than visible radiation. It is based on the sensor GUVA-S12D.It has a wide spectral range of 200nm-400nm. The module will output electrical signal which is varied with the change of the UV intensity. UV sensors are used for determining exposure to ultraviolet radiation in laboratory or environmental settings. Features: High stability Good Sensitivity Low power consumption Schottky type photodiode sensor Wide response range Grove Interface