Pressure & Vacuum - Page 95

Manufacturer: Fluke Corporation Brand: Fluke Model: TLK1550-RTLC

Integral test lead and 10 KV clamp for 1550X, 1555 insulation testers.

Manufacturer: Fluke Corporation Brand: Fluke Model: FL62MAX+/323/1AC

This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1000-000-RT

Cf10 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A3010

Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) WC up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-13.5-800-N

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: Fluke Corporation Brand: Fluke Model: I410-KIT

Kit includes i410 1-400A AC rms, 1-400A DC current Clamp, zippered vinyl carry case with moveable divider. Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. The Fluke i410 AC/DC 400 Amp current clamp meets CAT III 600V safety ratings and can take accurate current readings without breaking the circuit. Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools. Battery-powered hall-effect probe measures 1A to 400A. 1mV/Amp output guarantees easy reading on your meter. Take accurate current readings without breaking the circuit. Maximum conductor diameter 32mm. One year warranty. Measurement type: Hall sensor. Nominal current range: 400A, AC/DC. Continuous current range: 1A - 400A AC/DC. Maximum non-destructive current: 400A. Lowest measurable current: 0.5A. Basic accuracy: 3.5 percent + 0.5A (percent reading + floorspec). Useable frequency: DC - 3 kHz. Output levels: 1 mV/A. Zero error adjustment. Maximum voltage: 600V. Battery life: 9 V, 60 H. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-376 Color: 1000A TRMS AC/DC Clamp w/IFlex

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 629-04-CH-P2-E5-S1

The Series 629 Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4-20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability. Terminal block zero and span adjustments are easily accessed under the top cover. The Series 629 Differential Pressure Transmitter is designed to meet NEMA 4X (IP66) construction.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 451082AS02L30/0IMV

The standard Ashcroft test gauge case style features a solid-front aluminum case with a hinged ring. The dial has a polished mirror band for pointer reflection to prevent parallax error. Pointer is a balanced-friction adjustable design with red knife edge tip for easy reading.

Manufacturer: Automation Components Inc. (ACI) Brand: Automation Components Inc. (ACI)

A/WPR-100-10' | ACI | Differential Pressure Sensor Transducer Wet to Wet Water Fluid | 100 psi | 10 foot Wire Length