Moisture Balances - Page 11

Manufacturer: MARS Brand: Mars

Moisture balance determines the moisture content of a wide range of materials by the dry- and- weigh method. In a significant improvement over heat lamps, the uses a unique is for faster heating. It has in-built software that controls the rate of heating and does all the calculations that are relevant on wet basisor dry basis. Pharmaceutical and food industries, as also agricultural and research institutions will find this to be an effective tool for faster analysis of moisture content in various products. Silent features of moisture balance are: Saves time and improves accuracy Ir rods for deeply and evenly heats the sample Precise heater temperature control Inbuilt battery backup Automatic detection of dry-end point Bright led long life display Displays useful parameters with the touch of a key Helps study of drying pattern of the sample. Technical specification Measurement method : infrared radiation and detection of weight loss. Heat source : infrared rods (400 watts. Temperature setting : ambient to 2000c in 10 0 c steps. Temperature control : platinum temperature sensor. Accuracy : 0.1. Sample weight : 5gm. To 95gm.(optional upto 300gm Sensitivity : 0.01gms. Working range : 0.1 to 99.9 End analysis modes : time - out 1 to 99.9min. Result readability : 0.1 Units of results : moisture in percentage(dry and wet basis. Printer : optional.

Manufacturer: COLE-PARMER Brand: A&D Balances

What's Included: Tweezers, spoon, pan foils, display cover, bidirectional RS-232C interface, data collection software, and 6-ft (1.8 m) cord with three-prong plug. Three heating modes-quick mode, step mode, and standard operational mode-allow greater control of temperature settings Vacuum fluorescent display (VFD) shows moisture content, solid content, weight, atro moisture, and atro solid Programmable memory allows you to store up to 5 sample parameters

Manufacturer: Ohaus Brand: Ohaus Model: 11113002

The Ohaus ABS Housing MB moisture analyzer rapidly measures the precise moisture content of samples as often required by the pharmaceutical, chemical, and research industries. The analyzer has a backlit LCD that can be protected from spills by the replaceable in-use cover. The analyzer is provided with a pack of 90 mm diameter disposable aluminum sample pans to assist with easy cleaning of the heating chamber during frequent testing. The bidirectional RS-232 port can connect to a printer or computer for manual or automatic data recording. The compact ABS plastic and die-cast metal housing is tough and durable, to protect the internal weighing cell from environmental influences and impact, and the adjustable rear feet increase measurement accuracy by leveling the analyzer. The draft shield protects the sample pan from dust and airflow, which can cause inaccurate readings. To promote even heating and accurate readings of liquid or sugary samples, the specimen can be poured into or laid under the included fiber discs during analysis. Balances are measuring instruments used to determine the mass of an object, while scales are used to measure the weight of an object. The measurement results from balances are generally considered to be more precise compared to results from scales. Mechanical balances are the simplest type of balance, and use a lever and slide to indicate the measurement. Conventional balances are commonly used in offices, the jewelry industry, and in kitchens, and display results digitally, but are less precise than analytical balances. Analytical balances measure to a high degree of precision and accuracy (0.0001 g or better), and display results digitally. These balances have a cover with doors to prevent dust and airflow from affecting the measurement. Moisture balances analyze moisture content in a material sample, using infrared or halogen heat sources to dry the sample and then calculate the moisture content from the before- and after-drying weight, and display results digitally, on the balance, ...

Manufacturer: COLE-PARMER Brand: A&D Weighing Model: MX50

Three heating modes-quick mode, step mode, and standard operational mode-allow greater control of temperature settings Vacuum fluorescent display (VFD) shows moisture content, solid content, weight, atro moisture, and atro solid

Brand: Ohaus

Manufacturer: DAVIS INSTRUMENTS Brand: Ohaus

Ohaus MB Series moisture analyzers are the quick, effective, and affordable solution to measure moisture content. These moisture analyzers cover a wider variety of weighing applications in the pharmaceutical, chemical and research industries with excellent repeatability properties for consistent, accurate testing. MB35 Standard Moisture Analyzers offer additional performance features for food, wastewater, quality control, and agriculture applications. These moisture analyzers feature a maximum weighing capacity of 35 g, simplified user interface with 3-key navigation and setup, and straightforward one-step testing procedure. The bright LCD provides English, Spanish, and French instructions and displays % moisture, actual weight, actual temperature, and test time parameters. What's Included: 50 sample pans, fiber pads, in-use cover, and 6-ft (1.8 m) power cord Versatile and rugged design for continuous operation in food and beverage, quality control, environmental, and many other applications Choice of infrared or halogen heat source and programmable operation satisfy a wider variety of applications Durable, compact construction ensures dependable, long-term operation within minimum benchtop space Straightforward operation speeds up routine testing applications and accommodates operators of all skill levels Sample pan holder included.

Brand: Ohaus

Manufacturer: DSC Brand: DSC

A Brand New DSC70 Moisture Analyzer (Equivalent to AND MS70)

Manufacturer: GHQ Brand: Micronauts - WWII United States - Capital Ships

1944 version with more AA.Miniatures are supplied unpainted and assembly may be required.

Manufacturer: Qorpak Brand: Qorpak

Crimped sides and a flat smooth bottom. Compatible with most moisture balances. Use with liquid and solid samples including weighing, drying and moisture determination. Small, convenient-to-use inner packs. Measures 5" diameter by 3/8" depth.