Moisture Balances - Page 3

Manufacturer: Ohaus Brand: Ohaus Model: MB25AM

Ohaus : MB25 Moisture Analyzer

Manufacturer: AND Brand: MF50 Model: MF50

Specifications: Demo Unit MX-50 Measurement Method 400W straight halogen lamp heating system with SRA filter and SHS weighing technology Max Sample Weight Capacity 51 g Weight Resolution 0.001 g Moisture Content Display 0.01%/0.1% Moisture Content Accuracy over 1g 0.10% (Standard Deviation) over 5g 0.02% Heating Technology Halogen lamp (Straight type, 400 Watt max, 5000 hours) Drying Temperature (1C increment) 50-200C Memory of Measurement Programs 20 sets Measurement Programs Standard Mode/Automatic Mode/Quick Mode/Timer Mode/Manual Mode Measurement Mode Moisture content(Wet or Dry base) /Dry content/Ratio/Weight Heating Mode Standard / Quick / Step /Ramp Display Type Large VFD Interface RS-232C standard Data Memory Function 100 Operating Temperature 5-40C (41-104F) less than 85%RH GLP/GMP/ISO Available Self Check Function Standard Communication Software WinCT-Moisture standard Sample Pan Size Ø85mm Power AC 100V to 120V (3A) or AC 200V to 240V (1.5A), 50/60 Hz, Approx. 400W Physical Dimention/Weight 215(W) x 320(D) x 173(H) / Approx. 6kg Standard Accessories Sample Pans ( 20 for MS/MX/MF 10 for ML ), Pan Handles (2 for MS/MX/MF, 1 for ML ), Tweezers ( for MS/MX/MF ), Spoon ( for MS/MX/MF ), Test Sample (30g of Sodium Tartrate Dihydrate for MS/MX/MF ), CD-ROM (WinCT-Moisture for MS/MX, WinCT for MF ), Glass Fiber Sheet ( for MS/MX/MF ), RS-232C Cable ( for MS/MX ), Display Cover, Dust Cover ( for MS/MX/MF ), Instruction Manual, Quick Reference Card, Power Cable, Fuse Demo unit with FREE Ground Shipping

Brand: Sartorius

Fully Auto-IR-Moisture Analyzer (70 x 0.001 g / 0.01%)

Manufacturer: A&D Engineering Brand: A&D Engineering Model: 1332B46EA

Straight halogen lamp and uniquely designed SRA (secondary radiation assist) filter provides shorter measurement time with fast and uniform heating. Super Hybrid Sensor delivers ultra-accurate, high-precision moisture content determination of even small samples with a repeatability of 0.01% (standard deviation). Ergonomically designed panhandle eliminates burns when moving a hot sample. Full digital calibration with self-check function. Low maintenance cost. 400 Watt straight halogen lamp heating system with SRA filter and SHS weighing technology. Four measurement programs. Measures 215mm width by 173mm height by 320mm depth. 51g Maximum sample weight. 0.001g Weight resolution. Moisture content display: 0.01 percent/0.1 percent. Heating technology: Halogen lamp (Straight type, 400 Watt max, 5000 hours). 20 Sets memory of measurement programs. Measurement programs: Standard mode/automatic mode/quick mode/timer mode/manual mode. Measurement mode: Moisture content(wet or dry base) /dry content/ratio/weight. Heating mode: Standard / quick / step /ramp. Large VFD display type. RS-232C standard Interface. Operating temperature: 41 to 104 degree F less than 85 percent RH.

Manufacturer: Nevada WeighingTM Brand: Adam Equipment

90 mm Glass Fiber Sample Pads - 10,000 Count Size Cut from Binderless Glass Fiber Material. The Same Sample Pad Material sold by CEM, Ohaus, Mettler, and Sartorius. These sample pads meet all the criteria set by the AOAC. These binderless glass fiber material sample pads are used in moisture analyzers, convection ovens, and microwave moisture analyzers. Fits Moisture Analyzers by all of the Manufacturers listed below as well as Fat Tester models shown below: Adam Equipment, CSC Scientific, Denver Instrument, Intell-Lab, Mettler, Ohaus, Omnimark, Radwag, Sartorius, Manufactured in an ISO 9001 Facility for Nevada WeighingTM

Manufacturer: MG Scientific Brand: MGM

Moisture Balance determines the moisture content of a wide range of materials by the dry- and- weigh method. In a significant improvement over heat lamps, the uses a unique is for faster heating. It has in-built software that controls the rate of heating and does all the calculations that are relevant on wet basisor dry basis. Pharmaceutical and food industries, as also agricultural and research institutions will find this to be an effective tool for faster analysis of moisture content in various products. Silent features of Moisture Balance are:Saves time and improves accuracy IR RODs for deeply and evenly heats the sample Precise heater temperature control Inbuilt Battery Backup Automatic detection of dry-end point Bright LED long life display Displays useful parameters with the touch of a key Helps study of drying pattern of the sample. Technical Specification Measurement Method : Infrared radiation and detection of weight loss. Heat source : Infrared Rods (400 watts).Temperature Setting : Ambient to 2000C in 10 0 C steps. Temperature Control : Platinum temperature sensor. Accuracy : 0.1%.Sample Weight : 5gm. To 95gm.(Optional upto 300gm) Sensitivity : 0.01gms.Working Range : 0.1% to 99.9%End Analysis Modes : Time - Out 1 to 99.9min. Result Readability : 0.1%Units of Results : Moisture in Percentage(dry and wet basis).Printer : Optional.

Manufacturer: MG Scientific Brand: MGM

Moisture Balance determines the moisture content of a wide range of materials by the dry- and- weigh method. In a significant improvement over heat lamps, the uses a unique is for faster heating. It has in-built software that controls the rate of heating and does all the calculations that are relevant on wet basisor dry basis. Pharmaceutical and food industries, as also agricultural and research institutions will find this to be an effective tool for faster analysis of moisture content in various products. Silent features of Moisture Balance are: . Saves time and improves accuracy IR RODs for deeply and evenly heats the sample Precise heater temperature control Inbuilt Battery Backup Automatic detection of dry-end point Bright LED long life display Displays useful parameters with the touch of a key Helps study of drying pattern of the sample. Technical Specification Measurement Method : Infrared radiation and detection of weight loss. Heat source : Infrared Rods (400 watts).Temperature Setting : Ambient to 2000C in 10 0 C steps. Temperature Control : Platinum temperature sensor. Accuracy : 0.1%.Sample Weight : 5gm. To 95gm.(Optional upto 300gm) Sensitivity : 0.01gms.Working Range : 0.1% to 99.9%End Analysis Modes : Time - Out 1 to 99.9min. Result Readability : 0.1%Units of Results : Moisture in Percentage(dry and wet basis).Printer : Optional.

Manufacturer: MG Scientific Brand: MGM

Moisture Balance determines the moisture content of a wide range of materials by the dry- and- weigh method. In a significant improvement over heat lamps, the uses a unique is for faster heating. It has in-built software that controls the rate of heating and does all the calculations that are relevant on wet basisor dry basis. Pharmaceutical and food industries, as also agricultural and research institutions will find this to be an effective tool for faster analysis of moisture content in various products. Silent features of Moisture Balance are:Saves time and improves accuracy IR RODs for deeply and evenly heats the sample Precise heater temperature control Inbuilt Battery Backup Automatic detection of dry-end point Bright LED long life display Displays useful parameters with the touch of a key Helps study of drying pattern of the sample. Technical Specification Measurement Method : Infrared radiation and detection of weight loss. Heat source : Infrared Rods (400 watts).Temperature Setting : Ambient to 2000C in 10 0 C steps. Temperature Control : Platinum temperature sensor. Accuracy : 0.1%.Sample Weight : 5gm. To 95gm.(Optional upto 300gm) Sensitivity : 0.01gms.Working Range : 0.1% to 99.9%End Analysis Modes : Time - Out 1 to 99.9min. Result Readability : 0.1%Units of Results : Moisture in Percentage(dry and wet basis).Printer : Optional.

Manufacturer: MG Scientific Brand: MGM

Moisture Balance determines the moisture content of a wide range of materials by the dry- and- weigh method. In a significant improvement over heat lamps, the uses a unique is for faster heating. It has in-built software that controls the rate of heating and does all the calculations that are relevant on wet basisor dry basis. Pharmaceutical and food industries, as also agricultural and research institutions will find this to be an effective tool for faster analysis of moisture content in various products. Silent features of Moisture Balance are:Saves time and improves accuracy IR RODs for deeply and evenly heats the sample Precise heater temperature control Inbuilt Battery Backup Automatic detection of dry-end point Bright LED long life display Displays useful parameters with the touch of a key Helps study of drying pattern of the sample. Technical Specification Measurement Method : Infrared radiation and detection of weight loss. Heat source : Infrared Rods (400 watts).Temperature Setting : Ambient to 2000C in 10 0 C steps. Temperature Control : Platinum temperature sensor. Accuracy : 0.1%.Sample Weight : 5gm. To 95gm.(Optional upto 300gm) Sensitivity : 0.01gms.Working Range : 0.1% to 99.9%End Analysis Modes : Time - Out 1 to 99.9min. Result Readability : 0.1%Units of Results : Moisture in Percentage(dry and wet basis).Printer : Optional

Manufacturer: MG Scientific Brand: MGM

Moisture Balance determines the moisture content of a wide range of materials by the dry- and- weigh method. In a significant improvement over heat lamps, the uses a unique is for faster heating. It has in-built software that controls the rate of heating and does all the calculations that are relevant on wet basisor dry basis. Pharmaceutical and food industries, as also agricultural and research institutions will find this to be an effective tool for faster analysis of moisture content in various products. Silent features of Moisture Balance are:Saves time and improves accuracy IR RODs for deeply and evenly heats the sample Precise heater temperature control Inbuilt Battery Backup Automatic detection of dry-end point Bright LED long life display Displays useful parameters with the touch of a key Helps study of drying pattern of the sample. Technical Specification Measurement Method : Infrared radiation and detection of weight loss. Heat source : Infrared Rods (400 watts).Temperature Setting : Ambient to 2000C in 10 0 C steps. Temperature Control : Platinum temperature sensor. Accuracy : 0.1%.Sample Weight : 5gm. To 95gm.(Optional upto 300gm) Sensitivity : 0.01gms.Working Range : 0.1% to 99.9%End Analysis Modes : Time - Out 1 to 99.9min. Result Readability : 0.1%Units of Results : Moisture in Percentage(dry and wet basis).Printer : Optional.