Scales & Balances - Page 103

Manufacturer: Nevada Weighing Brand: Nevada Weighing Model: GF200-Sartorius

Sartorius Style 90 mm Glass Fiber Sample Pads - 200 Count Box Size. Cut from the original Binderless Glass Fiber Material. The Same Sample Pad Material sold by CEM, Ohaus, Mettler, and Sartorius. These sample pads meet all the criteria set by the AOAC. These binderless glass fiber material sample pads are used in moisture analyzers, convection ovens, and microwave moisture analyzers. Fits Moisture Analyzers by all of the Manufacturers listed below as well as Fat Tester models shown below: Adam Equipment, CSC Scientific, Denver Instrument, Intell-Lab, Mettler, Ohaus, Omnimark, Radwag, Sartorius, HFT 1000, HFT 2000, HFT 3000 Manufactured in an ISO 9001 Facility for Nevada WeighingTM

Manufacturer: J-so Brand: J-so

J-so Multifunctional 50KG Luggage Scale.Thermometer,Clock, Calculator,Tape measure,Clocks,Unit Conversion 7 in 1 design,Money-Back Guarantee

Manufacturer: Optima Scale Manufacturing Brand: Optima Scales Model: OPK-S5000

A reliable and compact precision balance with a solid plastic construction. This model has a stainless steel pan and comes with an AC adapter. 4-AA batteries (not included) can also be used without the AC adapter.

Manufacturer: Ohaus Brand: Ohaus Model: 80780263

The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class E2 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class E2 specifications for use as a reference standard calibrating other weights, and calibrating high precision analytical balances with readabilities as low as 0.1mg to 0.01mg. The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found” mass correction (for recalibration), “As Left” mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidel...

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 3129-0220

12 inch/300mm horizontal digital scale. Compatible with our LCD digital display units with mini USB plugs. Two mounting brackets are included. On/off button. In/mm conversion. Absolute zero setting. Standard CR2032, 3V battery included. 0005" 01mm resolution. Cannot be used on a PC. Accuracy is +/-.001"/0.02mm.

Manufacturer: Weightech Brand: Weightech

Weightech CB642-15kg-A3W Loadcell 15 kg Capacity

Manufacturer: Ohaus Brand: Ohaus

Ohaus replacement Level, Bubble, DV

Manufacturer: Anyload Brand: Anyload Model: 108BA-100,150KG

Load Cell for Scales.

Manufacturer: Ultimate Arms Gear Brand: Ultimate Arms Gear

Official Product of Ultimate Arms Gear, Brand New. Vernier Caliper with 6" Inch/15 cm Measuring Range for Measuring the Outside Diameter (OD) of Holes, Grooves, Tube Thicknesses, Depth and Step Measurements of Bores and Grooves. Thumb Lock Holds the Measurement In Place for Reading. Hardened Stainless Steel Construction Provides Durability and Wear Resistance. Thumb Roll for Precise Jaw Positioning. Inches and cm Dual Measurement. Great For Measuring When Building and Replacing Parts. Pocket Scale delivers extreme accuracy for precise measurement of powder, bullets, cases or loaded rounds. With 1/10th grain accuracy you will be able to achieve the maximum potential of your handloads. An integrated clear plastic cover protects the scale during storage and transport. The large, high-contrast backlit display is easy to read. Simple controls allow for easy changes of units, tare weights or counting. The performance and features of this scale make it a great value and will be a welcome addition to your loading bench. CPower: 2 AAA batteries( not included).

Manufacturer: Rice Lake Brand: Rice Lake

The Rice Lake metric stainless steel precision test weight meets American Society for Testing and Materials (ASTM) Class 4 specifications, has a 7.95 density, and is designed for a variety of weighing operations. The weight can be adjusted by attaching other weights to the screw-knob. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The set includes a precision test weight, a handling glove, and a protective case. The weight meets ASTM E617, Class 4 specification for use as a reference standard for calibrating semi-analytic balances, and for student use.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-control...