Scales & Balances - Page 214

Manufacturer: Ohaus Corporation Brand: Ohaus Model: TJ611

The Ohaus Triple Beam TJ611 Scale offers a 610 g capacity expandable up to 2,610 g with the Metric Weight Set. It also features notched and tiered beams for easy reading, magnetic dampening for quick results, and a zero adjust compensator to ensure correct zero.

Manufacturer: Acme Scale Systems Brand: Salter Brecknell Model: 235-6S-110/50

Salter Brecknell electronic/ mechanical hanging scale. Compact, robust and corrosion resistant, housed in a tough ABS plastic case with shatterproof polycarbonate dial cover. Low friction acetal bearings provide positive movement to give maximum sensitivity. Accurate to one part in 250 with up to 15 percent zero adjust. Supplied with top and bottom hooks. 5-115/128" Dial. Measures 6-49/64" width by 9-1/8" height by 2-1/4" thick. 110 lbs Capacity.

Manufacturer: Ohaus Brand: Ohaus Model: 80781110

The Ohaus metric, stainless steel, leaf-style, milligram precision calibration weight meets American Society for Testing and Materials (ASTM) Class 1 specifications, and is designed for calibrating other weights, or electronic balances and scales. The leaf-style weight has a turned-up end for lifting with tweezers and reducing handling and the risk of contamination or damage. It is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 1 specification for use as a reference standard for calibrating other weights and high-precision balances with readabilities as low as 0.1mg to 0.01mg. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found” mass correction (for recalibration), “As Left” mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Ac...

Manufacturer: Ohaus Brand: Ohaus Model: 80780346

The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class F1 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class F1 specifications for use calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found” mass correction (for recalibration), “As Left” mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certi...

Manufacturer: Troemner Brand: Troemner

Weight, Individual, Stainless Steel 2g weight, stainless steel, OIML style, calibrated to OIML Class F1. Weight is provided in a polypropylene case. Supplied with Troemner's NIST/NVLAP Weight Calibration Certificate. This listing is for Each _DELETE_

Manufacturer: Ohaus Brand: Ohaus

Ohaus Weight, 10g, OIML F1, With certification

Manufacturer: TrippNT Brand: TrippNT Model: 50029

The TrippNT acrylic equipment draft shield is a four-sided cube that fits over sensitive laboratory equipment to protect it from air currents and dust. The shield is made of clear acrylic, allowing for observation and manipulation of samples, without compromising measurements. The draft shield is enclosed on three sides and the top for access to samples and controls. A hole in the back allows for power cords, wires, and tubes to pass through. An angled flap at the front of the shield deflects downward drafts away from the open side and the instrument the shield is protecting. The draft shield protects balances, scales, and other sensitive laboratory equipment from air currents and dust that may make the equipment less accurate. TrippNT manufactures storage products, dispensers, carts, workstations, and shields for scientific laboratory applications. The company, founded in 1993, is headquartered in Kansas City, MO.

Manufacturer: Adam Equipment Brand: Adam Equipment Model: TBB 610S Color: No Tare

The Adam Equipment TBB610S triple beam mechanical balance has a capacity of 610g and an accuracy of 0.1g (also called readability). The balance is operated by positioning the 10g, 100g, and 500g sliding weights along the notched and tiered beams. The weights have an indicator in the center, and the beams are graduated to help ensure accurate readings and repeatable results. The balance has an integrated weigh-below hook for determining the density of solid samples. The stainless steel weighing pan resists corrosion from spills of most sample materials and the aluminum housing is sturdy and durable. The three included counterweights for weighing above capacity can be stored on the balance base. The housing has a built-in ruler, protractor, and conversion chart for various measuring applications. An integrated security slot for locks and cables safeguards the balance from unauthorized use or theft. The balance is manufactured to ISO 9001:2000 standards and, when used according to manufacturer’s recommendations, it is covered by a three-year warranty against defects in workmanship or materials. Specifications Maximum capacity 610g Readability 0.1g Repeatability (sd) 0.2g Linearity (+/-) 0.2g Weight of scale 3.8lb. Units of measurement Grams Weighing pan, diameter 150mm / 6 inches Balance dimensions, H x W x D 160 x 505 × 110mm / 6.3 x 19.9 × 4.3 inches Front beam configuration 10g weight, 0.1g increments Middle beam configuration 500g weight, 100g increments Rear beam configuration 100g weight, 10g increments Counterweight configurations (2) 1kg, (1) 500g H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Balances are measuring instruments used to determine the mass of an object, while scales are used to measure the weight of an object. The measurement results from balances are generally considered ...

Manufacturer: United Scientific Supplies Brand: United Scientific Supplies Model: WHSET9

These weights feature flat countersunk bottoms, with a doubleended hooked rod through the middle. They can be used on balance pans, as well as hooked in tandem for lever arm studies. Set of 9 weights consisting of 1 each 10g, 50g, 100g, 500g,1,000g, and 2 each 20g, 200 gram weights. Weights are made of polished brass and come in a storage block. Replacement weights are available separately.

Manufacturer: HKD-Pro Brand: HKD-Pro

Good quality, budget friendly hanging scale with scoop basket combo for weighting loose and bulk materials up to 22 lbs.