Scales & Balances - Page 91

Manufacturer: A&D Engineering Brand: A&D Engineering Model: HL-100

Product features: rugged and reliable design. Large square weighing pan clear LCD display (8mm). Accurate reading in wide temperature range. High resolution 10,000dd. Solid and reliable design. Clear LCD display (8mm). Accurate reading in wide temperature range. Portable (6 "aa" batteries not included). Stability indicator. Low battery indicator. Separate keys for power and re-zero. Auto power off. Standard carrying case. Capacity/resolution: 100 x 0.01g. Linearity: 0.03g. Repeatability/Std Dev: 0.02g. Pan size: 70mm. Battery life (approximately): 140 hours with alkaline type cells (70 hours with mangnese type cells).

Manufacturer: Rice Lake Weighing Systems Brand: Rice Lake

The Rice Lake metric, stainless steel test weight set meets National Institute of Standards and Technology (NIST) Class F specifications, and is designed for calibrating other weights, or electronic balances and scales. The weight set is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets NIST Class F specifications for commercial "Legal-for-Trade" weighing operations often required by state and local weights and measures officials, device installers and service technicians. Class F weights can be used to test the accuracy of most Class III scales, all scales of Class III L or IIII, and scales not marked with a class designation. NIST Class F weights are manufactured to specifications of NIST HB-105-1. The set of 12 weights includes two each 200g, 20g, and 2g weights, and one each 500g, 100g, 50g, 10g, 5g, and 1g weight, tweezers, and a protective case.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real...

Manufacturer: Anyload Brand: Anyload Model: 563-YS-5klb, 10klb

Load Cell for Scales.

Manufacturer: Adam Brand: Adam

1750g x 0.1g|Platform size 4.7"

Manufacturer: Anyload Brand: Anyload Model: 101BS-5klb

Load Cell for Scales.

Manufacturer: TrippNT Brand: TrippNT Model: 50240

The TrippNT acrylic equipment draft shield is a four-sided cube that fits over sensitive laboratory equipment to protect it from air currents and dust. The shield is made of clear acrylic, allowing for observation and manipulation of samples, without compromising measurements. The draft shield is enclosed on three sides and the top for access to samples and controls. A hole in the back allows for power cords, wires, and tubes to pass through. An angled flap at the front of the shield deflects downward drafts away from the open side and the instrument the shield is protecting. The draft shield protects balances, scales, and other sensitive laboratory equipment from air currents and dust that may make the equipment less accurate. TrippNT manufactures storage products, dispensers, carts, workstations, and shields for scientific laboratory applications. The company, founded in 1993, is headquartered in Kansas City, MO.

Manufacturer: Adam Equipment Brand: Adam Equipment Model: WBZ15A

The Adam Equipment WBZ wash down approved retail scales are ideal for food preparation, packaging plants, agricultural facilities, and other retail applications. The WBZ scales feature an IP66 rated wash down housing with a large stainless steel weighing pan. The larger backlit display shows weight, price per unit and an easy to read extra large total cost display. They operate with an mains AC adaptor or rechargeable battery pack for portability; both are included

Manufacturer: Ohaus Brand: Ohaus Model: 30253016

Setting New Standards in Laboratory & Industrial Weighing-The Next Generation of Scout Balances-The Ohaus STX.

Manufacturer: Intel Weighing Brand: Intel Weighing Model: PC-3001

Intel Weighing PC-3001 Laboratory Classic Precision Laboratory Balance has next characteristics: Capacity (g): 3000, Readability (g): 0.1, Warranty: 1 Year

Manufacturer: OrangeA Brand: OrangeA

F1 Grade Calibration Weight Kit 1 mg to 1000g for Various Scales And Electronic Scales Description:The F1 Grade Stainless Steel Test Weight Set meets OIML standard (OIML:International Organization for Legal Metrology ),fine and high accuracy classⅡBalance.This is designed for calibrating other weights, or electronic balances and scales. Calibration weights are used to measure the weight or mass of an object or to calibrate other weights or instruments. What's the difference between our F1 and M1 Weights: 1. F1 are more precise than M1, with smaller permission error. 2. F1 use 304 stainless steel, M1 use 2cr13 stainless steel. 3. M1 are with adjust bar (at the bottom of the weights), F1 are without. Specification Material: 304 Stainless Steel Level: F1 Grade Size: (9.1 × 5.7 × 4.3)" (23 × 14.5 × 11) cm Weight: 6.6lbs Specifications: 1mg-1kg Structure: Solid Overall Shape: Flake & Cylindrical Packing: Aluminum Case Quantity: 25 Purpose: The Accuracy Of The Calibration Of Various Scales And Electronic Scales Package Content 25pcs Weights 1 x Plastic Tweezer 1 x Aluminium Alloy Case 1 x Certificate Of Calibration How to use: 1. Weights shall be kept properly and shall not be placed in a wet, dusty environment. 2. Before and after the use of the need to count the boxes in a box, so as not to lose. 3. Shall not bare hand contact weights, in the use of weights should use special tools to extract weights. 4. Before use, first with a soft brush or a special cloth to remove surface dust weight. 5. In the balance before the test, the weights are required to achieve a constant temperature of the atmosphere in the laboratory. 6. Access weights must be handled with care.