TDS-3 Water Quality Digital TDS Meter with Temperature, 0-9990 ppm Measurement Range
The TDS-3-W Tier1 TDS Water Test Meter is the perfect tool for measuring and tracking your waterâ€™s levels of TDS to make sure your water filter is doing its job. With this meter, you wonâ€™t just need to take the filter manufacturerâ€™s word that it reduces TDS in your water; you can put it to the test!Total dissolved solids (TDS) are the total weight of all solids (minerals, salts, metals) that are dissolved in a given volume of water. The lower the TDS level in the water, the more efficiently your bodyâ€™s cells can use the water. Conversely, higher TDS levels can indicate water that is more difficult for your body to use and has more contaminants that can pose health risks.This meter is factory calibrated with dual range measurement and a 10 minute auto-shutoff to conserve battery life. Features a hold function that saves measurements for convenient reading and recording. Order the TDS-3-W Tier1 TDS Water Test Meter today!
Leaton Handheld TDS Water Test Meter.Backlight Professional combination TDS EC & Temperature Meter/Pen.3-in-1 Accurate and Reliable Water
Color: yellow+TDS 3-in-1 Accurate
TDS Water Quality Tester used to test the value of water, electrical conductivity of water to determine the purity of the water. With both test water temperature and environment temperature functions. It can be widely used in water treatment industry, drinking water industry, household, personal home travel and field operations Performance indicator: 1.Testing item: Water value ppm(mg/L),Conductivity us/cm, Celsius degree â„ƒ Fahrenheit degreeâ„‰. 2. Basic Function: ON/OFF/HOLD Function: ON: In the off state, press this button to boot. Auto-off: No operation, auto-off after 5minutes. Manual shutdownï¼š Continue to press ON/OFF button 3s shutdown. Function selection button(MODE): default display test water quality values ppm total dissolved solids; press this button, display test water conductivity us/cm value, press again, display Celsius degree â„ƒ,press once to display Fahtenheit â„‰;and then repeat the cycle above CLEAR" Function: reset .remove lock reading and re-test. Auto-test & Lock reading: insert into water can be auto-reading after quality shows corresponding TDS value or conductivity us/cm. Then automatically locked. Scale function: According to national standard scale and appropriately reference international practice. Direct drinking water warning reference to national standard adopted TDS=40 as a dividing line,ï¼œ40 green backlight display for qualified direct drinking water,ï¼ž40 red backlight display for non-drinking water. TDS read range: 0-9999, identifier 3.Power supply voltage: CR2032 ( buttoncell ),DC3V;230mAh. 4.Test range:TDS:0~9999ppm 5.Accuracy:+/-2% F.S 6.Temperature measurement range:0-99â„ƒ(Fahrenheit 32~212â„‰),accuracyÂ±0.1â„ƒ 7.Use environment:0-50â„ƒ Maximum relative temperature is 95% 8.Size:16.2*2.9*1.5(cm) Package contains: 1 x TDS Meter K-15 1 x TDS Meter Carrying Case 1 x TDS Meter User Manual
Yakamoz TDS-3 Handheld Digital TDS Meter for Water Quality Testing With Carrying Case, 0 - 9990 ppm TDS Measurement Range, 1 ppm Resolution, +/- 2% Readout Accuracy
Specifications TDS Range: 0 - 9990 ppm (mg/L) Temp. Range: 0 - 80 degrees Celsius Resolution: 0-999: 1 ppm; 1000-9990: 10 ppm (indicated by a 'x10' icon) Temperature Resolution: 0.1 degree Celsius (Celsius only) Accuracy: +/- 2% ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit) Power source: 2 x 1.5V button cell batteries (included) Note: No calibration function!! Package Included: 1 x TDS Meter Tester 1 x User Manual 1 x Carrying case with belt clip
Ricca 2236-16 Conductivity Standard, 10 microsiemens per centimeter (10 micromhos per centimeter) and 4.7 ppm as NaCl, 500 mL
Manufacturer: Ricca Chemical
Brand: Ricca Chemical
Ricca Chemical Company 2236-16, Conductivity Standard, 10 microsiemens per centimeter (10 micromhos per centimeter), 500 mL is manufactured with the tighest specifications currently available on the market and is intended for calibration of conductivity meters. The specification on Ricca Conductivity Standard, 10 microsiemens per centimeter (10 micromhos per centimeter) is plus-or-minus 0.03 at 25 degrees Celsius. This standard is certified traceable to NIST Standard Reference Material, lot numbered and expiration dated.
Water Quality Tester, MagicPro 2016 Newest Released Premium TDS-2 Handheld TDS Quality Water Tester Meter 0 - 9990 ppm TDS Measurement
MagicPro TDS meter (aka ppm pen, nutrient tester, tds stick) is an inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. With the push of a button, the TDS-EZ can tell you your overall water purity level, which will be displayed on the screen in ppm (parts per million). The lower the TDS level, the purer the water, with 0 ppm being pure H2O. The TDS-EZ is great for checking your tap water quality, or knowing when to change a filter. (The meter does not test for biological contaminants.) The TDS-EZ is a great tool for drinking water, water filtration and purification, hydroponics (test your nutrients), aquariums, RO/DI systems, pools and spas, and more.
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Packaging has been designed to keep air and light from damaging the solution. TDS solutions are produced with high quality potassium chloride in various concentrations. They are standardized using a conductivity meter calibrated with NIST potassium chloride. TDS value: 1382 ppm ( milligrams per liter) at 25 degree C. Size: 500ml. TDS value: 12.41 ppt (gram per liter).
GHB Water Quality Test Meter EC Meter TDS Tester WaterÂ Tester Conductivity Test Meter White
Digital EC-water meter (EC = electrical conductivity) that recognizes the content of non-organic and organic substances in your water sample. This instrument is very useful if you just want to know how clean your water really is. Test your tap water. â€¢ Hold function, making it easy to read and write, press HOLD button and then remove it from the test solution. â€¢ 4 viewing modes: press SHIFT key to change. â€¢ Automatic temperature compensation. â€¢ Battery: 1 * 3V CR2032 (included) Instrument features: 1.Lock Function, easy to ready and record, the instrument will lock the reading 2. 5-minute auto shut off feature, battery won't run off. 3. Measurement Range: Degrees Celsius: 0.1-80.0â„ƒ Conductivity: 0-9990us/cm TDS: 0-99990ppm Accuracy: Â±2% Size: 154*30*14(mm) F: 32.0-176.0 N.Wï¼š 55g Notice: â€¢ Please pull the electrodes Cases out before use. â€¢ Pressing the switch, the electrode in the test solution. â€¢ After numerically stable, press "HOLD" and remove it from the solution to read and write. â€¢ Turn off the meter, wipe the electrode, put it to store in package box.
HM Digital introduces its new AquaPro series, a line of handheld TDS/EC meters with a sleek design that's perfect for today's modern kitchen. The AquaPro digital water testers are the next generation for today's tech-savvy and health-conscience consumer.
Digital TDS Meter Inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. This pocket-size unit is also ideal for home or laboratory hydro-electrical conductivity testing Instructionsï¼š 1. Remove the cap from the pen and turn the switch on. 2. Dip the pen into the test solution but not more than 2cm. 3. Stir the pen in the solution, then stay stable and after 2-6 seconds the TDS value will display on the screen. Press the hold button to save the value and then look at it. 4. After using, dry the head the of the pen and put the cap back on. Please note: The body of the TDS pen should not be exposed to liquids, direct sunlight or high temperature. Avoid dropping it. Parameters 1.range: 0-9990ppm 2.accuracy: +/- 2%. 3.battery: 2*1.5v(button cell). 4.Operating Temperature: 0 ~50oC 5.Automatic Temperature Compensation: 0~60oC 6.Size: 154*26*19mm(6.06*1.02*0.75in) 7.Weight: 65g(2.29 oz) 8.Hold function: saves measurements for convenient reading and recording. 9.Auto-off function: turn on meter after 8 minutes of non-use to conserve batteries, and will be locked automatically after 2 minutes. 10.Dual range: measures from 0-999ppm, with a resolution is 10 ppm, indicated by drinking*10 image, factory calibrated. Package contains: 1 x TDS Meter 2 x 1.5V CR1620 Button Cells 1 x TDS Meter PU Case 1 x TDS Meter User Manual
Semlos Digital PH Meter 0.01 High Accuracy Water Quality Tester with Auto Calibration and 0-14 PH Measurement Range for Household Drinking Hydroponics Aquariums Pool
Semlos Digital PH Meter If you ever needed a super convenient pH meter that can be carried anywhere and used in a snap, this is it. This pH meter is affordable and useful for those who need a PH tester for household and laboratory use.It's not only ideal for household or laboratory use. Also suitable for testing pH balance of drinking water, pool, aquarium, food Project, RO system, Spa, or hydroponics. Specifications: Measure Range: 0.00-14.00 pH Resolution: 0. 01 pH Accuracy:Â±0.01 pH Material:Plastic Power supply:2*1.5V(keep using more than 500 hours ) Operatinf temperature:0-80 Calibration:two points automatic clibration Dimention:155mm*29mm*16mm/6*1.1*0.6inch Weig ht:52g/1.8oz How to use 1.Remove the protective cap. 2.Rinse the electrode with distilled water, and dry it with filter paper. 3.Turn on the meter,immerse the electrode into the test solution. 4.Stir gently and wait for the reading to stabilize. 5.Turn off the meter after use,rinse the electrode and dry it with filter paper. What's in the box 1 x Smelos PH Meter 1 x Instruction Manual 6x PH buffer Powder 1 x Carrying Case Note: *The meter was calibrated before off the factory. Do not need to calibrate the meter when first use. *The glass electrode is fragile, treat it carefully. Don't touch it by hard tools or fingers. *Please do not immerse the meter into the solution over the "warning line", to avoid damage to the circuit board. *If the "cal'(calibration) button is pressed and electrode exposed to air for a long time,calibration is required.