pH Testing - Page 61

Manufacturer: Body Rescue Brand: Body Rescue

Save On Body Rescue 1X Unit Body Ph Testing Tape15 Ft. Ph Protector For Use With Bodily Fluids Only. Ph Testing Tape Tests Both Saliva And Urine.: Gluten Free Kosher(Note: This Product Description Is Informational Only. Always Check The Actual Product Label In Your Possession For The Most Accurate Ingredient Information Before Use. For Any Health Or Dietary Related Matter Always Consult Your Doctor Before Use.)

Manufacturer: Test Assured Brand: Test Assured

Our Complete Water Analysis Test Kit +TDS Meter includes ALL 10 of our at home water tests and meter in one affordable package. This one kit will test for all of the following contaminants and elements: -10 Minute Lead Test -Pesticide Test -Bacteria/Coliform Test -Iron -Nitrates -Nitrites -Chlorine Level -Copper -Alkalinity -pH Test -Water Hardness TDS Meter Features: -Hold Function: Saves measurements for convenient reading & recording. -Auto-Off Function: Turns off meter after 10 minutes of non-use to conserve batteries. -Dual Range: Measures from 0-999 ppm, with a resolution of 1 ppm. From 1,000 to 9,9990, the resolution is 10 ppm, indicated by drinking x 10 symbol. Factory calibrated. This at-home test kit and meter allow you to quickly and accurately test your drinking water. It works with well water, city/municipal water, tap, well water, residential drinking water, groundwater and spring water sources. The results are fast, most within minutes, and very easy to read by following along with our color charts and instruction manual. It can easily be used at your home, classroom, school and anywhere else where you would need to test water quality.Our tests are made here in the USA - don't rely on foreign-made tests from other countries. Click ADD TO CART right away to get your Water Test + TDS Meter on its way!

Manufacturer: LaMotte Company Brand: LaMotte Model: 1204M92CS

Insta-Test PRO Phosphate strip measures the Phosphate levels from 0, 100, 200, 300, 500, 1000, and 2500 ppb in 15 seconds. The PRO Phosphate strips are packaged 50 strips per bottle in a 6-pack case.

Manufacturer: DuaFire Brand: DuaFire

Note:Not come with calibration solution.;Pen Type Meter that can simultaneously measure & display PH results;The electrode will remain accurate for a long time without recalibration;The electrode can be used in particularly taxing conditions;Great for all home and laboratory pH testing including aquariums, swimming pools, and more

Manufacturer: FHX Brand: FHX Model: 9271

"PH -097 Waterproof PH test pen pocket, big screen acidity temperature displayed simultaneously, with excellent water resistance and field applicability. Waterproof rating of IP55. After all readings are automatically temperature compensated (ATC). Temperature sensor in direct contact with the solution to be measured, so that accurate readings and fast. Using two points (pH4.00, pH6.86) automatic calibration. During calibration, you can simply place the appropriate standard instrument Buffer solution and press the CAL (calibration key). The instrument will automatically start the calibration data. PH meter has this feature, compared with analog circuitry, calibration faster and more accurate data, the operation is very simple, to avoid the need to adjust the potentiometer simulator calibration and verification to be repeated trouble. After the instrument is turned on, in no operation shut down automatically after four minutes. The instrument is simple, rugged and durable, economical and practical, fully in line with a variety of industry testing needs.Measuring range 0.00 ~ 14.00 Accuracy ± 0.01PH Temperature compensation range 0 ~ 50 (℃)"

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI8010

The Hanna Instruments HI 8010 is a portable pH meter used in educational settings with manual temperature compensation, manual two-point calibration, a single-line LCD screen, a pH electrode, and an acrylonitrile butadiene styrene (ABS) plastic housing. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The single-line LCD screen displays the current measurement. This meter has manual temperature compensation and manual two-point calibration through front trimmers with an offset of + or - 1 pH and a slope of 85 to 105 percent. The set calibration values are stored even when the meter is shut off. The meter comes with the HI 1230B polyetherimide (PEI) body combination pH electrode with a Bayonet Neill-Concelman (BNC) connector, double-gel reference, single ceramic junction, spheric tip, and 1m (3.3') coaxial cable. The input impedance is 10 E 12 Ohm. The meter uses a 9V battery (included) for up to 100 hours of continuous operation. The HI 8010 portable meter also comes with a calibration screwdriver and instructions.SpecificationspH range0.00 to 14.00pH resolution0.01pH accuracy+ or – .01Manual temperature range0 to 100 degrees C (32 to 212 degrees F)Operating temperature0 to 50 degrees C (32 to 122 degrees F)Operating relative humidity95 percentDimensions185 x 82 x 53mm/7.3 x 3.2 x 1.1 inches (H x W x D)Meter weight265g/9.3oz.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments from laboratories to field research and ma...

Manufacturer: OAKTON Instruments Brand: Oakton Model: 1183K11EA

The Ag/AgCl combination reference electrodes have an impact-resistant epoxy body. Electrodes provide a fast, stable response and are ideal for prolonged readings. Gel-filled design requires virtually no maintenance. 127 mm L x 12 mm diameter with maximum 176F (80C) temperature.

Manufacturer: QIAT Brand: CPTCAM

The CPTCAM 5-in-1 Multi-parameter water quality monitor is very powerful to measure and monitor pH, EC/CF/TDS levels and water temperature in real time simultaneously. It is featured with three sensor probes which can make measurement individually to minimize interference, make readings more accurate and reliable. The pH and temperature sensor probes are conveniently replaceable. And all the parameters, pH, EC/CF/TDS and water temperature can be calibrated. Moreover, the three large 4-digit LCDs with backlight enables users to do testing, measurement & monitoring conveniently even in dark environments. Specifications Measuring Range: pH: 0.00 ~ 14.00 PH Water Temperature: -0 ~ 50°C EC: 0.00 ~ 19.99EC CF: 0.0 ~ 199.9CF TDS: 10 ~ 9990ppm Resolution: pH: 0.01 PH Water Temperature: 0.1°C EC: 0.01EC CF: 0.1CF TDS: 10ppm Accuracy: pH: ±0.1 PH Water Temperature: ±1°C EC, CF, TDS: ±2% F.S Automatic Temperature Compensation (ATC): 0 - 50 °C Operating Temperature: 0 - 50°C Rechargeable Battery: DC 6V lithium battery (built-in)(Power adapter usable) AC Power Adaptor,US Dimensions: approx. 152(L) x 80 (W) x 26(D) mm Weight: approx. 265g Package List 1 x LeaningTech Multi-parameter Water Quality Monitor 1 x pH Probe 1 x Temperature Probe 1 x AC Power Adapter usable 1 x Mini Screwdriver 1 x Mounting Bracket 2 x Suction Cups 1 x Instruction Manual

Manufacturer: HM Brand: HM

HM Digital's PH-200 is a digital waterproof pH meter (aka pH tester or pH pen) that is ideal for all pH testing, water purification applications, wastewater regulation, aquaculture, hydroponics, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, er treatment, wine, coffee, agriculture and more. It is fast-acting, features amazing results and perfect for the hobbyist to the laboratory professional.

Manufacturer: Daigger Brand: LabGenius Model: 7011-DSI

The lab Genius waterproof meter is capable of performing multifunctional testing on ph., cond(us), tds(ppm), orp(mv), salt(ppm). it is simple to calibrate by one keyboard. Low batter and consumption indicator with auto power shut-off after 10 minutes of inactivity. Easy to replace electrode module with automatic electrode recognition displayed during insertion. The unit includes a carrying case, sensor, standard solution, soaking solution, 4 x 1.5V batteries, a lanyard connection and an instruction manual.