Flowmeters - Page 10

Manufacturer: Dwyer Instruments Brand: Dwyer Model: VFA-41

The Visi–Float flowmeter bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. As a result, the Visi-Float flowmeters are especially popular for medical and laboratory equipment applications. Scales are easy to read - The front scale location and white background provides excellent visibility. The direct reading scales are hot stamped into the plastic and will not wear off. Mid-range calibration is established with a master flowmeter. Accuracy is ±5% of full scale for VFA models, ±3% for VFB. Scales average 2" long on the VFA models, 4" long on VFB. Durable and attractive construction - The machined acrylic bodies of the Visi-Float® flowmeters are practically unbreakable. Fabrication is backed by over 60 years of experience in acrylic instrument machining. The tapered bore is precision machined to a smooth surface that provides perfect visibility of the indicating float. The VFA and VFB models are available with either brass or stainless steel inlet and outlet connections and are tapped for 1/8" NPT thread. VFB models 85 and 86 have either 1/4" back or 3/8" end connections. All standard models employ Buna-N O-rings for leak proof operation and are available with either back or end connections for horizontal or vertical piping. Precision metering valves in brass or stainless steel are available for most VFA and VFB models. Easy installation - All Visi–Float® flowmeters have metal mounting inserts on rear for panel mounting. They can also be supported directly by system piping.

Manufacturer: JS-10914047 Brand: WEONE

Note: The color of the item may vary slightly due to photography and your own computer Features: Widely used for measuring and controlling the flow of oxygen Beautiful look,low weight,unbreakable and long life span. Material: Acrylic, plastic and metal Size: 73.7x28x100mm/2.90"x0.98"x3.94"(WxTxH) Connection: 8MM pagoda (hose connection) Center distance: 76mm Medium: Gas Accuracy: 5% Flow range: 0.5-5LPM Working pressure: ¡Ü0.6Mpa Operating temperature: 0-60 ¡ã C Product function: To measure gas single-phase non-pulsating flow Scope: Mainly used to detect oxygen flow, control the flow of oxygen, the gas flow can be detected. The case can be used for industrial, oxygen and other gases need to calculate the flow rate Package include: 1 x LZQ-6 Oxygen Flow Meter

Manufacturer: uxcell Brand: uxcell

Flowmeter measuring the oil or water, easy to read for its clear scale.Straight tube style connect the liquid tube by two end thread.Stainless steel material inner and glasses tube design.Read float at largest diameter, you will kow the flow of water.

Manufacturer: uxcell Brand: uxcell Model: a11122600ux0560

LZM serial flow meter, which is mainly made of plastic material, is used to measure the single-phase non-pulsating flux of liquid.Straight tube style connect the liquid tube by two male thread, easy to read for its clear scale.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: WESTERN ENTERPRISES Brand: Western Enterprises Model: FM202

Flowmeter O2 8Lpm 1/4Nptm

Manufacturer: COLE-PARMER Brand: Kobold

The device operates as follows: The flowing medium presses against the paddle for the flow switch. The paddle is fitted to one end of a balance arm which is in direct contact with a prestressed leaf spring. At the other end of the balance arm is a permanent magnet. This magnet actuates a reed contact located within a moveable housing outside the media. The reed contact switches on or off depending on the position of the permanent magnet and the switch housing. The status of the switch may then be used to electrically control the fluid flow. The moveable reed switch on the unit allows the contacts to be set either normally open (N/O) or normally closed (N/C). FEATURES Switch point adjustable Easy to install Brass or SS construction Maximum pressure: 1450/3600 PSI

Manufacturer: PicoBrew Brand: PicoBrew Model: KEG1GFRM Color: Silver

The brewing keg is used for the brewing session, fermenting, and draft dispensing of beer brewed by the Pico Brew pico. Features ball lock connectors for those who wish to serve their beer on draft in their kegerator. Rubberized.

Manufacturer: COLE-PARMER Brand: Brooks Instrument

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters' inlet/outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (32462-50 sold separately) which allows for mobility from bench to bench. Note: There are many additional types of acrylic flowmeters not listed here. Contact our Application Specialits for quotes on acrylic meters with special requirements. Durable single-piece body withstands severe shock and vibration Ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment. Flexible design allows for panel or bench mounting

Manufacturer: COLE-PARMER Brand: Brooks Instrument

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters' inlet/outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (32462-50 sold separately) which allows for mobility from bench to bench. Note: There are many additional types of acrylic flowmeters not listed here. Contact our Application Specialits for quotes on acrylic meters with special requirements. Durable single-piece body withstands severe shock and vibration Ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment. Flexible design allows for panel or bench mounting