Flowmeters - Page 11

Manufacturer: COLE-PARMER Brand: Kobold

The device operates as follows: The flowing medium presses against the paddle for the flow switch. The paddle is fitted to one end of a balance arm which is in direct contact with a prestressed leaf spring. At the other end of the balance arm is a permanent magnet. This magnet actuates a reed contact located within a moveable housing outside the media. The reed contact switches on or off depending on the position of the permanent magnet and the switch housing. The status of the switch may then be used to electrically control the fluid flow. The moveable reed switch on the unit allows the contacts to be set either normally open (N/O) or normally closed (N/C). FEATURES Switch point adjustable Easy to install Brass or SS construction Maximum pressure: 1450/3600 PSI

Manufacturer: Racine Federated Brand: Hedland Model: H624-104

EZ-View Flow Meters For Oil. 1/2 inch ports. EZ to install, in any position. Polysulfone bodies for standard applications. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 – 7MO stainless.

Manufacturer: Key Instruments Brand: Brooks Instrument

Technical Specification Item Flowmeter Type Variable Area Max. Pressure (PSI) 100 Connection Size (In.) 1/8 FNPT Max. Temp. (F) 150 Length (In.) 1-1/2 Width (In.) 1 Height (In.) 4-9/16 Housing Material Polycarbonate Fitting Brass Chamber Material Polycarbonate Flow Range .05 to 0.5 lpm Accuracy (%) +/-4.0 Flow Material Air Flow Range (LPM) .05 to 0.5 Flow Range @ LPM of Air .05 to 0.5 Max. Viscosity 16.4 CST Insert Brass O-Ring Buna Compliance & Restrictions Compliance and Restrictions This product has been manufactured to be compliant with the "Safe Drinking Water Act" requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption). This item is restricted for conveying or dispensing water for potable use (human consumption) in states that require 3rd party certification of compliance with the "Safe Water Drinking Act" (CA, LA, MD, VT). This item is restricted for international sale. This listing is for each. _DELETE_

Manufacturer: Dynasonics Ultrasonic Flow Meters Brand: Dynasonics Ultrasonic Flow Meters

Dynasonics D010-0204-001

Manufacturer: tereninstruments Brand: tereninstruments

We use DHL and Fedex. Generally, it only needs 3 days to arrive America from China. The lead time is about 1-3 business days.Measuring Range: DN50-DN700mmMaterial: High temperature materialMagnetism: YesTemperature: 0C~ 160CProtection: IP65Medium: Water, sea water, sewage water, alcohol, oil and other liquidsMedium turbidity: Under 10,000Pipe material: cast/stainless steel cast iron, copper, PVC, Aluminum, Fiberglass, lining availableLining material: EPCT, Rubber, Mortar, PP, GPPS, Bakelite, PTFE etc. Transducers and Measuring Range: HS: DN15-100mm 0C~ 160CHM: DN50-700mm 0C~ 160CS1: DN15-100mm 0C~ 90CM1: DN50-700mm 0C~ 90CL1: DN300-6000mm 0C~ 90CS2H: DN15-100mm 0C~ 90CM2H: DN50-700mm 0C~ 160CL2H: DN300-6000mm 0C~ 160C

Manufacturer: AMETEK Brand: Ametek

NEW AMETEK 20-4300-4HCFB C029074 0-1.6GPM WATER FLOW METER D523892

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-728/H526-008-NC#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|4 - 28 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media

Manufacturer: TOKYO FLOW METER Brand: TOKYO FLOW METER

TOKYO FLOW METER FM-PR36G-432-B5-0 FLOW-CHECKER, SYATEM"A" SW-ON:SET LEVEL OR MORE, DCO~24V MAX0.2A MAX4.8W

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMC-145-SSV

line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.

Manufacturer: BROOKS Brand: Brooks

' Flowmeter, Variable Area, Max Pressure 100 PSI, Connection Size (In) 1/8 FNPT, Max Temp 150 F, Housing Material Polycarbonate, Chamber Material Polycarbonate, Flow Range @ SCFH of Air 1-22, Max Viscosity 16.4 CST, Stainless Steel Fitting, Viton O-Ring, Accuracy +/-4 % '