Flowmeters - Page 31

Manufacturer: uxcell Brand: uxcell

2-port flow meter, which is mainly made of plastic material, is used to measure the single-phase non-pulsating flux of liquid.Straight tube style connect the liquid tube by two male thread, easy to read for its clear scale.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The New LFM Series Flowmeters are made of injection molded, heat and chemically resistant polycarbonate bodies and fittings. Series LFM flowmeters have dual scales measuring in both GPM and LPM with 5% accuracy. A textured background on the body enhances scale readability. Standard in-line models come with 1/2" male NPT connections for LFMA, LFMB & LFMC; 3/4" male NPT connections for LFMD; 1" male NPT connections for LFME; and 2" male NPT connections for LFMF. Panel mount installation is available with 90° elbow fittings that include panel lock nuts. Various other fittings are available. CAUTION: Series LFM Flowmeters are for indoor use only or areas without direct sunlight. Polycarbonate is adversely affected by ultraviolet light.

Manufacturer: Dwyer Instruments Inc Brand: Dwyer

Dwyer RMB-55 Rate-Master Flowmeter S12J 30-400 SCFH Air

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: Western Enterprises Brand: Western Enterprises Model: 312-RWS-2-13

Durable flow tube with large, easy-to-read gradients and shatter-resistant cover. Dual calibrated. Sensitive, easily adjusted needle Valve. Protective Inlet filter extends flowmeter life. Made in the U.S.A.

Manufacturer: Tuthill Brand: Fill-Rite Model: KIT300MA

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.

Manufacturer: XZB Brand: XZB

Can measure diesel, gasoline, methanol, water and other liquids weak acid weak base The metering pump or the work environment needed for proper use of the pump, 0.1ma pressure over the working environment to more than 10 liters per minute flow rate before they can use and can not be used to measure small flow Built-in electronic adjustable precision, can be set to the desired accuracy range is 10 liters oil screen shows the actual refueling 10.1 l 11.5 l 9 l 8 l 1 l, can be freely modified, more, add less can be set, convenient and practical (does not set the shop also has instructions can ask a key set) Flowmeter specifications; Length: 105MM Width: 55MM Turbine flowmeter low-cost, high-precision electronic counter, durable and compact modular design allows the turbine flowmeter and output modules, sensors and remote transmitters used in conjunction with a local display microcomputer unit features: two cumulative amount (a which could be reset, a can be accumulated) Easy to replace internal components, easy maintenance Lightweight, compact design is easy to install Battery, about 9,000 hours Connection type thread Body Material Aluminum Available Sizes "1.5" Flow range 20-200GPM (76-760LPM) Accuracy: 1% Body material: Aluminum Pressure Rating: 300PSI Contact with the fluid part of the material body: Aluminum Bearings: Ceramic Shaft: Tungsten Carbide package list:G1.5 flow meter(without battery)

Manufacturer: AALBORG Brand: Aalborg

NEW AALBORG PMR1-013042 0.2-4LPM NITROGEN GAS FLOW METER D546113

Manufacturer: PRM Brand: PRM Model: WM075VX

PRM multi-jet water meters are known for their wide range, simplicity, and accuracy in low quality water. Features: Silicone Rubber Seals, Sealed Dry Dial for Clear Readings, Internal Strainer to Protect Meter from Particulate Damage, Magnetic Drive for lower resistance. Specifications: Class:B, Accuracy: Transitional Flow: ± 5% Nominal Flow: ± 2%. Maximum Water Temperature: 104°F. Maximum Water Pressure: 232 psi. Mounting Orientation: Horizontal. Materials: Body: Brass, polyethylene, Couplings: Brass, Measuring Chamber: Polyethylene, Paint: Epoxy Coated, Seal: Black: Silicone Rubber, White: HDPE; Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS.