Flowmeters - Page 5

Manufacturer: Tuthill Brand: Fill-Rite Model: 901CL1.5

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.

Manufacturer: Great Plains Industries Brand: GPI® The Proven Choice® Model: 01N31GM-U

The GPI 01N31GM-U digital turbine DEF (diesel exhaust fluid) flowmeter is made from durable nylon and features an LCD display that is accurate to +/-5 percent of reading. This economical turbine meter is designed for flow rates from 3 to 30 GPM and is factory calibrated in gallons for use with DEF. The lightweight 01N31GM-U mounts easily to the end of a hose and is ideal for use with free flow gravity systems or combined with an electric transfer pump as part of a DEF or urea monitoring or dispensing system. The GPI 01N31GM-U digital flow meter has 1-inch FNPT inlet/outlet and comes with two standard AAA batteries.

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: TUF-2000M-TM-1

Features: 1. High Accuracy measuring Linearity: better than 0.5%,Repeatability: better than 0.2%, Accuracy:better than ±1% 2. Wide measuring range Several types transducer for selection,measuring pipe size from DN15mm to DN6000mm 3. Chinese & English menu Different version UFM can support Chinese or English display, easy to operate 4. High Reliability Adopt low voltage,multi-pulse technology to improve accuracy,useful life and reliability 5. Strong Anti-interference Dual-balance signal differential receiver/driver circuit to avoid interference of converter,TV tower, high voltage line etc 6. Powerful Recording Function Automatically record the following data: a. The totalizer data of the last 512 days/128 months/10 years b. The time and corresponding flow meter of the last 64 times of power on and off events c. The working status of the last 32 days 7. Power Supply:DC8-36V 8. Input:3 channel 4-20mA analog input 9. Output:Isolation RS-485 output, 2 channel isolation OCT output:1 channel isolation 4-20mA output (two-wire system) 10. Communication Protocols:Compatible with METER-BUS,MODBUS,Fuji extended protocol and general water meter protocol Clamp On Transducer Introduction: 1. TS-2 type: DN15-100mm，-30-90℃ 2. TM-1 type: DN50-700mm，-30-90℃ 3. TL-1 type: DN300-6000mm，-30-90℃ 4. HTS-2 type: DN15-100mm，-30-160℃ 5. HTM-1 type: DN50-700mm，-30-160℃ 6. HTL-1 type: DN300-6000mm，-30-160℃ Insertion Type Transducer Introduction: 1. TC-1: DN＞80mm -30~160℃ 2. TC-2：DN＞80mm -30~160℃ (Lengthen Type) Accessories: Transmitter;TM-1 transducers;Clamp Fixture;Cable

Manufacturer: Tuthill Brand: Fill-Rite Model: 825X700

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.

Manufacturer: Racine Federated Brand: Hedland Model: H600A-015

Flow Meter For Petroleum Fluids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 0.876 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. COMMON PARTS are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: SAE 1070/1090 Carbon Steel, Retaining Spring: SAE 1070/1090 Carbon Steel, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Dwyer® Series WMT2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges even in low flow applications. The meter is designed for long service life and relatively maintenance-free operation, even under adverse conditions. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. The reed switch is activated by a magnet on the dial, which is directly proportional to the flow rate. The output is perfect for remote monitoring of flow rate or flow totalization, and can interface with PLC's, counters, data loggers, and SCADA systems. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).

Manufacturer: PRM Brand: PRM Model: WM200PVX

PRM multi-jet water meters are known for their wide range, simplicity, and accuracy in low quality water. Features: Pulse Output Components, Silicone Rubber Seals, Sealed Dry Dial for Clear Readings, Internal Strainer to Protect Meter from Particulate Damage, Magnetic Drive for lower resistance. Specifications: Class:B, Accuracy: Transitional Flow: ± 5% Nominal Flow: ± 2%. Maximum Water Temperature: 104°F. Maximum Water Pressure: 232 psi. Mounting Orientation: Horizontal. Materials: Body: Brass, polyethylene, Couplings: Brass, Measuring Chamber: Polyethylene, Paint: Epoxy Coated, Seal: Black: Silicone Rubber, White: HDPE; Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS.

Manufacturer: Racine Federated Brand: Hedland Model: H701A-030

Flow Meter For Petroleum Fluids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 0.876 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. COMMON PARTS are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: SAE 1070/1090 Carbon Steel, Retaining Spring: SAE 1070/1090 Carbon Steel, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.

Manufacturer: CSC Scientific Brand: CSC Scientific Model: 24925000

The Bostwick Consistometer is the preferred choice for measuring consistency and flow rate in a variety of products. You can use the "Bostwick" on any viscous material such as sauces, salad dressings, paints, chemicals or cosmetics. The normal way to use the Consistometer is to measure the distance a sample flows in a given time interval.

Manufacturer: BQLZR Brand: BQLZR Model: N07270

Note: The color of the item may vary slightly due to photography and your own computer Features: Widely used for measuring and controlling the flow of oxygen Beautiful look,low weight,unbreakable and long life span. Material: Acrylic ,plastic and metal Village ruler Specifications:66x22x80mm/2.60"x0.87"x3.15"(WxTxH) Connection: 8MM pagoda (hose connection) Center distance: 58.5mm Applicable medium: Gas Accuracy: 5% Flow range: 0-3LPM Working pressure: ≤0.6Mpa Operating temperature: 0-60 ° C Product function: to measure gas single-phase non-pulsating flow Scope: Mainly used to detect oxygen flow, control the flow of oxygen, the gas flow can be detected. The case can be used for industrial, oxygen and other gas flow to be calculated Package include: 1 x LZQ-2 Oxygen Flow Meter