Viscometers - Page 41

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon MKVC-200 modified Koppers vacuum-calibrated viscometer has a 2,400 to 52,000 poise (P) viscosity measuring range and is suitable for the measurement of highly viscous materials such as asphalt at 140 degrees F. It has a two-piece design with sample reservoir and calibrated capillary. The MKVC-series size 200 viscometer uses a 178mm depth water bath (not included) for temperature-control testing, and a 300mm Hg vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This vacuum-calibrated viscometer meets the ASTM International D2171 standard for testing asphalt viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet ...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7912

The LV Quick Connect Kit with Rack is an accessory for the DV-E rotational viscometer.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUSMC-50 calibrated capillary-style viscometer has a 0.8 to 4.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.004 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The CUSMC-series size 50 viscometer uses a 240mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development,...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUSMC-75 calibrated capillary-style viscometer has a 1.6 to 8.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.008 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The CUSMC-series size 75 viscometer uses a 240mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development,...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon ZCAC-6 Zeitfuchs cross-arm viscometer has a 200 to 1,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of either transparent or opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 1.0 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The ZCAC-series size 6 viscometer uses a 230mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, pro...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0605

The BYK-Gardner 0605 replacement bubble viscometer standard tube has a viscosity of approximately 31 centistokes (cSt), and is suitable for testing fluids such as resins and varnishes. The 9mL capacity sealed bubble tube standard is lettered A1 and has a bubble test time of approximately 0.820 seconds. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. The sealed standard tube has a 15-year shelf life and can be National Institute of Standards and Technology (NIST) recertified. This bubble viscometer standard tube is ASTM International certified and meets the ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufac...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0644

BYK-Gardner bubble viscometers are used to quickly determine kinematic viscosity of known liquids such as resins and varnishes. The time required for an air buble to rise is directly proportional to the viscosity of the liquid - the faster the bubble rises, the lower the viscosity. BYK-Gardner bubble viscometers come in lettered tubes A5 through Z10 in four different tube sets covering viscosity ranges from 0.05 to 1,000 stokes.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0611

The BYK-Gardner 0611 replacement bubble viscometer standard tube has a viscosity of approximately 53.6 centistokes (cSt), and is suitable for testing fluids such as resins and varnishes. The 9mL capacity sealed bubble tube standard is lettered A and has a bubble test time of approximately 0.936 seconds. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. The sealed standard tube has a 15-year shelf life and can be National Institute of Standards and Technology (NIST) recertified. This bubble viscometer standard tube is ASTM International certified and meets the ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufa...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0642

The BYK-Gardner 0642 replacement bubble viscometer standard tube has a viscosity of approximately 889.2 centistokes (cSt), and is suitable for testing fluids such as resins and varnishes. The 9mL capacity sealed bubble tube standard is lettered V and has a bubble test time of approximately 8.97 seconds. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. The sealed standard tube has a 15-year shelf life and can be National Institute of Standards and Technology (NIST) recertified. This bubble viscometer standard tube is ASTM International certified and meets the ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufa...

Manufacturer: Vetus Brand: VETUS INSTRUMENTS

VETUS INSTRUMENTS Rotary Viscometer NDJ-1 Absolute viscosity 1-100000 mPa.s Rotational Viscometer Viscosity Meter NDJ-1 Fluidimeter Rotor Size: No 1;2;3;4 Four Spindles Product Description NDJ-1 rotary viscometer is widely used to measure the viscosity of various kinds of liquid, such as mineral oil, lube, paint, fuel, and ink. It is a precision instrument to monitor and control the quality of products in the manufacturing. The instrument is one of the upgraded products manufactured by our company. Adopting the advanced mechanical design technology, the manufacture techniques and the microcomputer technology, it can collect data accurately. Using white background light and ultra bright LED display screen, it can show data clearly. With a special printing interface, it can plot out the measurement data through a printer. The instrument has the characteristics of high measurement sensitivity, reliable results and beautiful model, as well as convenience to be operated. It is suitable to determine the absolute viscosity of the Newtonian liquids and the apparent viscosity of non-Newtonian liquids. It can be widely used to determine the viscosity of various liquid such as greases, oil paints, plastic, pharmaceuticals, dopes, adhesives and detergents, etc. The main technical parameters: Determining range 1 ~ 1 x 105 mPa Rotor specifications 1, 2, 3, 4, 4 kinds of rotor (0 th rotor is option, measurable low viscosity to 0.1 mPa. S) Instrument speed 6/12/30/60 turn/points Measurement error Plus or minus 5% (Newton liquid) Electricity source 220 V ± 10 V; Frequency 50 Hz Net weight 5.5 kg Shape dimension 400 x 370 x 150 mm