Viscometers - Page 5

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/IP/SL(S)-4 suspended-level viscometer has a 6.0 to 30 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.03 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 11mL. The BS/IP/SL(S)-series size 4 viscometer uses a 250mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing. It includes an ASTM International certificate of calibration. This calibrated suspended-level viscometer meets the ASTM International D446 standard for suspended-level viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant qual...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/IP/MSL-7 miniature suspended-level viscometer has a 600 to 3,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 3.0 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 4mL. The BS/IP/MSL-series size 7 viscometer uses a 305mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated miniature suspended-level viscometer meets the ASTM International D446 standard for suspended-level viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, resear...

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument The product usually takes 7--13 business days to arrive to your hand after your order is confirmed . Introduction  BEVS NF Cup is designed according to French NFT30-070 standard and it is widely used by European company and French company especially. Technical Specification Volume: 108±1 ml Material: Cup body-aluminum alloy ,Aperture-stainless steel Flow Time: 30-300 secs. BEVS 1118/2.5: 2.5mm(Orifice), 5~140cSt(Viscosity Range) BEVS 1118/4: 4mm(Orifice), 50~1100cSt(Viscosity Range) BEVS 1118/6: 6mm(Orifice),510~5100cSt(Viscosity Range) BEVS 1118/8: 8mm(Orifice), 700~11500cSt(Viscosity Range) Friendly Reminder We will try our best to provide you the best product and service, welcome to buy our product. Please contact us if you have any question,and we will reply it as soon as possible.

Manufacturer: U.S. Solid Brand: U.S. Solid

A viscometer measures the torque required to reach a certain speed. This rotational viscometer uses the spring system and dial reader to obtain accurate viscosity results for your lab or business. The synchronous motor rotates with a stable rate, connects to the scale disk through the hairspring and rotating shaft. This drives the rotor to rotate. The rotors are subject to torque proportional to the liquid's viscosity because of the liquid viscose hysteresis. The torque is measured by the sensors and processed into the viscosity then shown on the display. The viscometer is a dependable option for all your quality control needs. 220 V, all orders shipped from the US come with a converter so you can use with a 110V system **For Non-Newtonian liquids, this unit will only test apparent viscosity** To find the absolute viscosity, plug the rotor number and speed into the reference chart to get your coefficient. Multiply the viscometer results by the coefficient to get the absolute viscosity. Measurement range: 1 - 100 Pascal seconds (Pa.s) Rotor Types: 1-4 Rotor Velocity: 6, 12, 30, 60 rpm Measurement Accuracy: ±5% (Newton liquid) Power Supply: 220V/110V±10% ; 50Hz/60Hz±10%

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7913

The RV Quick Connect Kit with Rack is an accessory for the DV-E rotational viscometer.

Manufacturer: Thomas Scientific Brand: BYK-Gardner Model: 500

The BYK-Gardner 500 bubble viscometer tube set has a 9mL capacity and a 0.05 to 0.31 stokes viscosity range, and is suitable for testing fluids such as resins and varnishes. The set includes 5 sealed bubble tube standards, lettered in the A5 through A1 range and two grade A sample testing tubes with cork stoppers. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. The sealed standard tubes have a 15-year shelf life and can be National Institute of Standards and Technology (NIST) recertified. This bubble viscometer tube set meets ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or gover...

Manufacturer: MG Scientific Brand: MGM

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export Redwood Viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. Redwood Viscometer is delivered to the clients in a committed time frame owing to our diligent carriage and freight agents.Features of Redwood Viscometer Machines:- Require Minimum Distortion and are the perfect solution to all the problems. Excellent Performance Robust Construction

Manufacturer: LABGO Brand: LABGO

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export redwood viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena.Features of redwood viscometer machines:- Require minimum distortion and are the perfect solution to all the problems. Excellent performance Robust construction

Manufacturer: Mars International Brand: Mars

Mars International Tar Viscometer

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7901

The BYK-Gardner 7901 Brookfield-type rotational viscometer has a 15 to 2,000,000 centipoise (cP) viscosity measuring range and measures the dynamic viscosity of a fluid based on the force required to stir the fluid. Its auto-ranging LED display shows viscosity in centipoise (cP) and millipascal seconds (mPa s), percentage torque, spindle used, and rpm, and a rotary switch allows selection of 18 speeds. It accepts 220V input power. The viscometer is accurate to 1 percent and results are repeatable to 0.2 percent.The model LVDV-E viscometer includes a set of four spindles, lab stand, carrying case, and operating instructions. This Brookfield-type rotational viscometer is suitable for testing a variety of fluids, such as oils, gases, polymers, cosmetics, detergents, and foods for use in a variety of industries. SpecificationsViscometer typeBrookfield-type rotational, model LVDV-EMeasurement range15 to 2,000,000 centipoise (cP)Measurement unitscentipoise (cP) and millipascal seconds (mPa s)Rotation speeds (RPM)0.3, 0.5, 0.6, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 10, 12, 20, 30, 50, 60, 100Number of spindles4Accuracy1 percentRepeatability0.2 percentInput power220VDisplayLEDWeight7.7kgDimensions480 x 380 x 250mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. ...