Turbidity Meters - Page 9

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI93703-0

The Hanna Instruments HI 93703-0 turbidity calibration standard solution meets Environmental Protection Agency (EPA) approved AMCO AEPA-1 standards, and is used for calibrating a turbidity meter at one point. It is a stable and non-toxic alternative to Formazin, has a value of 0 Formazin Turbidity Units (FTU), and comes in a 30mL bottle. The HI 93703-0 is an accessory for use with Hanna Instruments turbidity meters, which are used to test drinking water and ambient water to meet government standards, and to monitor water used in the manufacture of food and beverages.Turbidity meters (also called turbidimeters) determine the concentration of solids in a sample of liquid (usually water). Turbidity is the cloudiness of a liquid caused by the presence of suspended solids (particles) that may include microorganisms, yeast, or sediment. Turbidity meters indirectly determine the concentration of these solids by measuring the light scattered by particles in the sample. Turbidity meters are commonly used to test drinking water, environmental water, and water used for food and beverages for compliance with government standards.Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) standard 9001.

Manufacturer: LaMotte Brand: LaMotte Model: 1452

science-lab-turbidity-meters

Manufacturer: Fisher Scientific Brand: Fisher Scientific

PT# 22278591 TURBIDITY STANDARD, 0 NTU Made By: Fisher Scientific

Manufacturer: Lawrence Enterprises Brand: Lawrence

TUBE TRANSPARENCY 120 CM This listing is for Each

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI731313

The Hanna Instruments HI 731313 maintenance kit with carrying case is used to help keep turbidity meter cuvettes clean and undamaged for accurate measurements. In addition to cleaning accessories, the kit includes spare cuvettes and two primary standard solutions that meet Environmental Protection Agency (EPA) approved AMCO AEPA-1 standards, with values of 0 and 20 Nephelometric Turbidity Units (NTU). The HI 731313 is an accessory for use with Hanna Instruments portable turbidity meters, which are used to test drinking water and ambient water to meet government standards, and to monitor water used in the manufacture of food and beverages.Turbidity meters (also called turbidimeters) determine the concentration of solids in a sample of liquid (usually water). Turbidity is the cloudiness of a liquid caused by the presence of suspended solids (particles) that may include microorganisms, yeast, or sediment. Turbidity meters indirectly determine the concentration of these solids by measuring the light scattered by particles in the sample. Turbidity meters are commonly used to test drinking water, environmental water, and water used for food and beverages for compliance with government standards.Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) standard 9001.What's in the Box?HI 93102-0 0 NTU calibration solution (30mL)HI 93102-20 20 NTU calibration solution (30mL)HI 93703-50 cuvette cleaning solution (230mL)(2) Glass cuvettes with capsCuvette cleaning clothCarrying case

Brand: QIWEI

This scattered light turbidity meter is used for measuring suspended in water or in transparent liquids insoluble particulate matter produced by scattering, and quantitative standard to the suspended particle matter content. Can be widely used in power plant, the pure water plant, water plant sewage treatment factory, beverage factory, environmental protection departments, industrial water, wine making industry and the pharmaceutical industry, hospitals, epidemic prevention departments and other departments of the determination of turbidity. Technical index: The determination principles: 90 ° scattering light Measurement range: 0～ 200NTU The minimum value: 0.1NTU The basic error: ± 2.5%F.S Repetitive: ≤ 1%F.S Zero drift:±1%F.S The power fluctuations: ± 0.5%F.S Power: AC 220V/50HZ 5W, DC 7.5V (5 x 1.5V AA batteries) The environment temperature: the use of 5～ 35 ℃, -20～ 55 ℃storage The relative humidity: ≤ 80%RH

Manufacturer: FireflySci Brand: FireflySci Model: HF-0.2

Use the HF-0.2 neutral density filter to test for photometric accuracy in the 400-700nm wavelength range

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: 1197H88EA

The Hanna Instruments HI 98703 is a portable turbidity meter designed to meet EPA reporting requirements. The meter has two, three, or four point calibration, can log up to 200 samples, and has automatic range selection. It operates on four 1.5V AA batteries and automatically shuts off after 15 minutes of non-use. The meter has a USB 1.1 or RS 232 interface, a tungsten filament lamp light source and a backlit LCD screen to reduce glare. Equipped with tag identification system for using with electronic tags in the field, and logs up to 200 measurements until data can be downloaded to Windows. The meter uses the Ratio Nephelometric Method (90 degree), and an adaptation of the USEPA Method 180.1 and Standard Method 2130 B. Turbidity ranges are 0.00 to 9.99; 10.0 to 99.9 and 100 to 1000 NTU + or - 2% of reading plus 0.02 NTU, with resolutions 0.01 NTU from 0.00 to 9.99 NTU; 0.1 NTU from 10.0 to 99.9 NTU; 1 NTU from 100 to 1000 NTU. Typical EMC deviation is + or – 0.05 NTU. Dimensions are 224 x 87 x 77 mm (8.8 x 3.4 x 3.0”), with weight 512 g (18 oz.). Turbidity meters measure the loss of transparency due to suspended particles present in a solution. They are commonly used to measure the turbidity of water in both the field and laboratory. Hanna Instruments manufactures a wide variety of analytical instrumentation, including pH meters, multi-parameter meters, electrodes, chemical reagents, and buffer solutions. Founded in 1978, Hanna is headquartered in Woonsocket, RI, with subsidiaries in 32 countries. Hanna Instruments holds many firsts in the field of analytical instrumentation, including a pH electrode with a built in temperature sensor, an electronic pocket-sized pH tester, and a replaceable electrode pH pocket tester. To assure the quality of its products, Hanna is a vertically integrated manufacturer and does not subcontract any part of its manufacturing. What’s in the Box? Five sample cuvets and capsCalibration cuvets (HI 98703-11) Silicone oil (HI 93703-58) Tissue for wiping the cuvet...

Manufacturer: Tintometer Brand: Tintometer Model: 194200

For measuring water turbidity (cloudiness) according to either EPA or ISO Standards.

Manufacturer: Grant-Bio Brand: Grant Instruments Model: DEN MCF 18 STDS

Set of 5 McFarland reference standards for user calibration 18mm tubes.