Multiparameter Meters - Page 2

Manufacturer: Lamotte Brand: LaMotte Model: 1749-KIT-01

Designed for the pool professional. The tester's probe is dipped into a sample of pool water and the results are ready instantly. The Salt PockeTester measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results. The PockeTester is packages in a rugged carrying case with a special calibration standard.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35425-05

The Oakton 35425-05 Oakton Multiparameter 35-Series PTTestr 35 is a handheld, waterproof, and dustproof pocket meter that measures pH, conductivity, and temperature and floats, if dropped in water. A portable pocket meter is commonly used to measure the pH of substance in hydroponics, agriculture, industrial process checks, water treatment, and swimming pools. This meter features ATC for accurate readings in fluctuating temperatures, and push-button calibration capabilities for a wide range of results. It has stainless steel, pin-type conductivity sensors for durability and compatibility with a wide variety of samples. The meter’s waterproof and dustproof housing has IP67-rating for protection against solid objects or liquids. The testr has a long-lasting sensor with Polyvinylidene Fluoride (PVDF)-protected reference junction with polymer gel for longer lifespan. The meter has a large, upright, dual-line LCD screen for ease of viewing, a hold function which freezes readings for recording, and an auto shut-off to extend the life of the batteries. It has a click-lock battery cover for battery access to replace batteries without tools. The 35425-05 pocket meter has ATC from 0 to 50 degrees C (32 to 122 degrees F), or manual ability, and an operating temperature range of 0 to 50 degrees C (32 to 122 degrees F), resolution 0.1 degree, + or - 0.5 degrees C (+ or - 0.9 degrees F). It has 1-point temperature 2-point TDS, and 3-point pH calibration capability range. pH range is 0.0 to 14.0, resolution 0.1, accuracy + or - 0.1. TDS range 0 to 1000 ppm; 1.00 to 10.00 ppt, resolution 1 ppm; 0.01 ppt, accuracy + or - 1% full-scale. Its dimensions are 1.25 (w) x 6.5 (h) inches (3.8 x 16.8 cm) and it weighs 3.25 ounces. The testr works with four 1.5-V alkaline batteries (not included) for up to 250 hours of continuous use (Eveready A76 or LR44 replacements). pH testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agriculture, hydropon...

Manufacturer: Fieldpiece Brand: Fieldpiece Color: Multicolored

Designed specifically for HVACR professionals, the SRH3 InDuct Diagnostic Psychrometer is a great tool to properly charge fixed restrictor systems. More than 70% of A/C units are improperly charged, and therefore running inefficienty, but with the SRH3 it's easier to ensure units are running at their maximum efficiency. The SRH3 InDuct Psychrometer is a great tool to properly charge fixed restirctor systems by quickly determining the target superheat, and to help determine optimum airflow across the evaporator with a target evaporator exit temperature test.  To assist HVACR professionals get the proper measurements, Fieldpiece engineered this in-duct psychrometer to take measurements in the duct where they are supposed to be taken -- near the evaporator! The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned. With the quick sensor it's a snap to determine target superheat, and take target evaporator exit temperature tests. Competitive Advantages Like all Fieldpiece products, the SRH3 digital psychrometer was engineering specifically for HVACR professionals. It contains the specific measurements and tests techs need, without any they don't. Because it automatically calculates target superheat and target evaporator exit temperature, PT charts and written math are a thing of the past. Plus the dual display with bright backlight, and rugged rubber boot with probe clips make sure the SRH3 is ready for any job.

Brand: Kelway Model: HB2

KelwayTM pocket size soil tester needs no chemicals - simply insert in soil for instant reading! Push button switch for measuring pH ranges from 3.5 to 8. Can be calibrated to maintain accuracy. Also measures soil moisture (humidity). Accuracy +/- .2 pH in acidic soils, not designed for alkaline soils 7.5+ pH. Case included, 6 1/2" long. Tests soil in 3 minutes, no battery or chemicals, 6 ½in. overall length, 8oz. overall weight. Complete with carring case. PH range from 3.5 to 8. Used for testing soil not liquids. Manufacturer promises these are accurate to within +/- .2 of a PH number in acid soil. These are not made for saline or alkaline soil with a pH over +7 Manufacturer supplies a 6 month warranty against defect in material or workmanship.

Manufacturer: Velleman Inc. Brand: Velleman

BENCH DIGITAL MULTIMETER

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The Hanna Instruments HI 931001 is a pH and mV simulator with a single-line LCD display, range selection key, coarse and fine adjustment, Bayonet Neill-Concelman (BNC) connectors, and 1m coaxial (3.3') cable. This device simulates all output values at 25 degrees C (77 degrees F). The simulator has a pH range of 0.00 to 14.00 and an mV range of -1000 to 1000 with coarse and fine adjustment knobs. The single-line LCD displays the current reading from the connected pH meter. A 9V battery provides approximately 500 hours of use. The simulator comes with a 1m coaxial (3.3') cable with a Bayonet Neill-Concelman (BNC) connector at each end for tight cable connections. SpecificationspH range0.00 to 14.00mV range-1000 to 1000pH resolution0.01mV resolution1pH accuracy+ or - 0.01mV accuracy+ or - 1Operating environment0 to 50 degrees C (32 to 122 degrees FMaximum humidity95 percentConnectionBNCCable1m (3'3) coaxial cableDimensions185 x 82 x 53mm/7.3 x 3.2 x 2.1 inches (H x W x D)Weight320g/11.3oz.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments, from laboratories to field research and manufacturing facilities. Researchers, manufacturers, and hobbyists use a pH meter in aquaculture, agriculture, wine-making, and water-testing, and for scientific applications. Some pH meters may measure additional parameters such as dissolved oxygen (DO), conductivity (also called electro-conductivity or EC), temperature, total dissolved solids (TDS), salinity, resistivity, or oxygen reduction potential. Hanna Instruments manufactures analytica...

Manufacturer: Sensorex Brand: Sensorex Model: SAM1-5500

The SAM-1 smart aqua meter from sensorex turns your smartphone or tablet into a power and convenient ORP meter, Packaged with ORP Sensor.

Manufacturer: Extech Brand: Extech Model: MM560A

These CAT IV, 600V meters are made to withstand the most industrial applications. MultiMasterTM meters (26866-00 & -10) are AC/DC True-RMS, high accuracy multimeters. Features include trigger level, auto-off, continuity test, relative, hold, and peak capture. For process measurements, a 4 to 20 mA signal displays as 0 to 100%. Download data to a PC via RS-232 input (order cable and software 26866-20). Model 26866-10 also measures temperature. What's Included: built-in stand, CAT III test leads, protective holster, and one 9V battery. Model 26866-10 includes a temperature probe. Multimeters designed for your professional needs Rugged housing protects meter in demanding applications

Manufacturer: Blue Sea Systems Brand: Blue Sea Systems Model: 8403

All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch.

Manufacturer: Milwaukee Instruments Brand: Milwaukee

The Milwaukee Mi806 portable meter displays pH with temperature or electrical conductivity (EC) and total dissolved solids (TDS) with temperature on a large, easy-to-read display for water treatment and other general applications. The stability indicator prompts the user when the reading is stable. The auto-hold function can be set to freeze readings automatically for later viewing. TDS factors can be selected from 0.45 to 1.00, as well as a range of temperature coefficients from 0.0 to 2.4% for increased consistency and reproducibility of readings. Temperature can be set to display in centigrade or Fahrenheit. The meter offers automatic one-point or two-point pH calibration, with automatic buffer recognition. EC has automatic one-point calibration. The meter automatically shuts off after eight minutes of inactivity.Accessories included with the Mi806 portable meter are the MA851D/1 pH/EC/TDS/temperature amplified probe with 1m/3.3ft. cable and DIN (Deutsches Institut für Normung) connector, two pH calibration solution sachets, two 1413 μS/cm calibration solution sachets, two electrode cleaning solutions, and a hard carrying case.SpecificationspH range0.00 to 14.00 pHpH accuracy+ or – 0.01 pHConductivity range0 to 20.00mS/cmConductivity accuracy+ or – 2% full scaleTDS range+ or – 20.00pptTDS accuracy+ or – 2% full scaleTemperature range0 to 60 degrees C (32 to 140 degrees F)Temperature accuracy+ or – 0.5 degree C (+ or – 1 degree F)Power source(1) 9V alkaline battery (included)Weight260g/9.17 ounces (with battery)Dimensions200 x 85 x 50mm/7.8 x 3.3 x 2 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.A multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts o...