Multiparameter Meters - Page 3

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The HI 99121N is a portable, waterproof pH and temperature meter that comes with the HI 1292D pH electrode for measuring diluted soil samples or soil directly, and features a large LCD screen, automatic temperature compensation (ATC), a hold function to freeze and record results, and a battery error protection system (BEPS) to reduce inaccurate readings. The meter comes with the HI 1292D electrode, which has a sturdy conical tip that can be directly inserted in soft soil, and the HI 721319 plastic soil auger for perforating harder soil. The meter features on-screen tutorial messages to assist with calibration, which is automatic at one or two points. The HI 99121N comes with (3) AAA 1.5 V batteries that provide approximately 1200 hours of continuous use (an auto off function shuts the meter off after 8 minutes of non-use). A 100 mL beaker and starter buffer, cleaning and soil preparation sachets are included. pH range is -2.00 to 16.00 (+ or - 0.02pH) with a resolution of 0.01 pH. Temperature range is - 5.0 to 105.0 degrees C (23.0 to 221.0 degrees F) + or - 0.5 degrees C (up to 60 degrees C), + or - 1 degree C (outside); + or - 1.0 degree F (up to 140 degrees F), + or - 2 degrees F (outside), with a resolution of 0.1 degrees C or F. Dimensions are 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”), with weight 205g (7.2 oz.). pH testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists. Hanna Instruments manufactures a wide variety of analytical instrumentation, including pH meters, multi-parameter meters, electrodes, chemical reagents and buffer solutions. Founded in 1978, Hanna is headquartered in Woonsocket, RI, with subsidiaries located in 32 countries. Hanna Instruments holds many firsts in the field of analytical instrumentation, including the world’s first pH electrode with a built in temperature sensor, electronic pocket-sized pH tester, and replaceable electrode pH pocket tester. To assure the quality of its products, Hanna is a vertical...

Manufacturer: YSI Brand: YSI

Flow cell for YSI 556MPS, 600XL, and 600XLM multiparameter instruments. Includes fittings for both 1/4" and 3/8" tubing.

Manufacturer: Thermo Scientific Brand: Thermo Scientific Orion Model: STARA2110

This Thermo Scientific Orion Star A211 pH Benchtop Meter is the ideal choice for any lab. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows pH/mV/RmV and temperature along with electrode status, time, date, sample ID, user ID and calibration points. For advanced users, features such as stability and averaging choices provide additional options. Anyone can use this meter with its plain language screen prompts, soft keys that update for easy selection and a multilanguage interface that supports English, Spanish, French, Italian, German and Chinese. AUTO-READ locks in the stable reading on your screen, ready indicator alerts when readings are stable, and timed reading gathers data in specific time intervals. Provides up to 5 point pH calibration with automatic recognition for USA/NIST and DIN buffers. Fix calibration errors without a complete recalibration with calibration editing. The non-volatile memory holds up to 2000 data points with time and date stamp. Easily transfer data and keep meter software up-to-date with the USB and RS232 ports and complimentary data analysis software. Mix samples without a stir plate with direct control of the Orion Star stirrer probe (096019, sold separately). Included electrode arm and newly-designed probe holder make it easier to maintain and place probes into samples. Works with almost every AC power source with the included universal power adapter, or use four AA batteries (sold separately) to run the meter on DC power. IP54-rated housing handles splashes and is wall-mountable if table space is a problem. 3 year meter replacement warranty. Certifications: CE, TUV, FCC Class A limits. pH Range: -2.000 to 20.000. pH Resolution: 0.1, 0.01, 0.001. pH Relative Accuracy: ±0.002. pH Calibration Points: Up to 5. pH Calibration Editing: Yes. mV/RmV Range: ±2000.0 mV. mV/RmV Resolution: 0.1. mV/RmV Relative Accuracy: ±0.2 mV or ±0.05 % of reading whichever is greater. mV/RmV EH ORP Mode: Yes. Temperature Rang...

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI991003

The Hanna Instruments HI 991003 is a waterproof, portable pH, pH-mV, oxygen reduction potential (ORP)/mV, and temperature meter used in water treatment applications with Automatic Temperature Compensation (ATC), automatic calibration at one or two points, a multilevel LCD screen, a pre-amplified pH/ORP probe with internal temperature sensor, and a battery error prevention system. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. An ORP meter, also known as a redox potential tester, measures the oxidization or reduction capacity of a solution, and monitors chemical reactions and ion activity. The multilevel LCD screen simultaneously displays the current measurement, the current temperature, and tutorial messages. This meter has ATC from -5.0 to 105.0 degrees C (23.0 to 221.0 degrees F) for accurate readings in fluctuating temperatures. The meter also has automatic one-or two-point calibration with two sets of memorized buffers: standard (4.01, 7.01, and 10.01) or National Institute of Standards and Technology (NIST) (4.01, 6.86, and 9.18). The meter comes with the HI 1297D pre-amplified pH/ORP electrode with internal temperature sensor, titanium cage body, single cloth-junction to reduce contamination, gel electrolyte for fast response, 7-pin Deutsches Institut für Normung (DIN) connector for a tight cable connection, and 1 m (3.3') cable. The meter uses three 1.5V AAA batteries (included) for up to 1200 hours of continuous operation and can be set to turn off automatically after eight minutes of non-use to extend battery life. The battery error prevention system alerts when battery power is low and displays battery percentage on startup. The operating temperature is from 0 to 50 degrees C (32 to 122 degrees F) with a relative humidity of 100 percent. The dimensions are 152 x 58 x 30mm/6.0 x 2.3 x 1.2 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distan...

Manufacturer: YSI Brand: YSI Model: 6050000

The Pro Plus instrument meets the demands of true field work. The instrument is rated to IP-67 standards even without the battery cover on. Other tough features include a 3-Year warranty, Mil-spec connectors, rubber overmolded case, and a 2-Year cable warranty. In-house testing procedures also include 1- meter drop tests from all angles to ensure expected field-durability. Drop-tested 1 meter at all angles. Scratch-resistant lens; viewable with polarized glasses. Instrument floats. Auto stable: user-defined auto-stable function holds stable readings on display when criteria is met. Barometer: built-in barometer. Certifications: RoHS, CE, WEEE, C-Tick, VCCI, FCC, IP-67, 1-meter drop test, Assembled in USA. Connectivity: USB 2.0; ProComm II communications saddle and USB cable included; user-upgradeable software via USB and website. Connector: military spec waterproof with bayonet lock. Data management: data manager desktop software included; 100 user-defined folders and site names. Data memory: 5,000 data sets; 100 GLP files. Display: graphic display with detailed Help; backlit display AND keypad. DO membrane response times and flow dependence: 1.25 mil PE equals to 8 seconds and 6" per sec flow. DO sensors: polarographic or galvanic field sensors; self-stirring polarographic BOD sensor for the lab. Field cables: standard lengths of 1, 4, 10, 20, or 30 meters up to 100 meters on DO only cables; 4 through 30-meter cables include a cable management kit. Flow cell: single, dual and multiparameter Quatro cable all flow cell compatible. GLp compliance: yes; detailed GLP information is stored and is available to view, download or print. Operating temperature: -10 to 60 degree C. Power: 2 alkaline C-cells provide 80 continuous hours at ambient temperature without backlight. Storage temperature: -20 to 70 degree C. User ID: optional user ID for data security. Measures 8-1/2" length by 3-1/4" width by 2-13/64" depth.

Manufacturer: IPW Industries Inc. Brand: IPW Industries Inc.

Product Description: A TDS meter (aka ppm pen, nutrient tester, tds stick) is an inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. With the push of a button, the TDS-3 can tell you your overall water purity level, which will be displayed on the screen in ppm (parts per million). The lower the TDS level, the purer the water, with 0 ppm being pure H2O. The TDS-3 is great for checking your tap water quality, or knowing when to change a filter. (The meter does not test for biological contaminants.) The TDS-3 is a great tool for drinking water, water filtration and purification, colloidal silver, hydroponics (test your nutrients), aquariums, RO/DI systems, pools and spas, commercial and industrial applications and more. The TDS-3 is a rugged model that includes a protective carrying case. This is the world's most popular handheld TDS meter for industry professionals.

Manufacturer: BIPEE Brand: BIPEE Model: 6020A

Description:This PH Meters is Waterproof and Available for wide applications, such as aquarium, beverage, fish hatcheries, food processing, photography, laboratory, quality control, school & colleges, swimming pools, water conditions. Feature: measuring range:0~14 ph accuracy +/-0.02 ph Three point Calibration:4.01, 6.86, 9.18 Working temperature range:0~50 Celsius Degree (32~122 Fahrenheit) 1.5V *4 Button cell battery Dimension 188*38mm Including External Electrode; Weight 82g Package Includes:-1 x pH Meter-1 x External Electrode with 0.8m Length Cord (BNC Interface)-1 x Carry Case-3 x Calibration Packet-4 x button cell (1.5V)-1 x Manual

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, AC Volt,W96xH48mm, LED 4 1/2-Digit, 19.999V Full Scale, 100-240 VAC

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, Digital Scaling, LED, W48xH24mm, 4 Digit, 4-20 mA input, Loop Powered

Manufacturer: Horiba Brand: HORIBA Model: 3200174823

Consumable for Horiba U series multiparameter.