Multiparameter Meters - Page 7

Manufacturer: Aqua Galaxy Brand: Aqua Galaxy Model: AG-SAM-5500

The SAM-1 smart aqua meter from Hydro Galaxy turns your smartphone or tablet into a powerful and convenient ORM meter. iPhone/iPad not included; used for display purposes along with the screen image.

Manufacturer: COLE-PARMER Brand: Cole-Parmer Model: AO-05802-04

Cole-Parmer conductivity controllers offer features found in more expensive models. Selectable cell constants and temperature coefficients, and automatic temperature compensation ensure measurement accuracy. Compatible with a 10 K thermistor conductivity cells. The Cond 350 (05802-04) controller has isolated and reversible 4 to 20 MA output for conductivity or resistivity that allows it to be used as a proportional output. Economical options with programmable on/off relays, or isolated 4 to 20 MA output backlight LCD for clear measurement display. Conductivity range: 0.00 to 19.99 MS with +/1 0.5 percent accuracy. Universal power supply input from 100 to 240VAC. Easy-to-install 1/8-din compact plastic casing.

Manufacturer: Milwaukee Instruments Brand: Milwaukee Model: 338

Milwaukee Mi151-US pH/ORP/Temperature Laboratory Bench Meter can be used for general purposes.

Manufacturer: Autonics Brand: Autonics USA, Inc Model: MP5W-44

Meter, Pulse, LED, W96xH48mm, 5-Digit, 13 Modes, 5 NPN Outputs + Transmission output (DC4-20 MA), 100-240 VAC

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35652-00

The Oakton WD-35652-00 Precision pH/mV Simulator is used for testing bench-top or handheld meters, controllers and transmitters. This simulator has push-button operation allowing for easy selection of values, and USA, National Institute of Standards and Technology (NIST) buffers. It has a wide range of output values for more readings. The simulator has an LED display for ease of viewing, a low-battery indicator, and a splash-proof membrane keypad for security. It comes with a BNC connector for tight coaxial cable connection. Its high impedance simulation is useful for testing suspected leakage problems. The WD-35652-00 Precision pH/mV Simulator is able to simulate pH values of: 1.00/1.68/4.01/6.86/7.00/9.18/10.01 or 12.45, mV values, -1,800/-900/-390/390/900 or 1,800. pH accuracy + or - 0.05, mV accuracy of + or - 2 mV. Its high impedance simulation (HiZ) is 1 G ohm at 4.01 pH & 10.01 pH. Its dimensions are 10.375(d) x 2.75(w) x 5.75(h) inches [3.5 (d) x 7.0 (w) x 14.6 (h) cm], weighs 200 g (boxed), comes with a 1-meter cable, and requires four AAA batteries (included). A simulator is designed to test the accuracy of a meter, controller, or transmitter. pH measures the acidity or alkalinity of a substance and mV measurement provides a megavolt value. This simulator is used for chemical analysis within the aquaculture, agriculture, pharmaceutical, food processing, and lab industries. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China. What’s in the Box? Simulator 1-meter BNC cable Four AAA batteries

Manufacturer: YSI Brand: YSI Model: 605105

The YSI 605105 chloride ISE sensor takes chloride measurements for fresh-water quality measurements in the field. This ISE (ion selective electrode) sensor is designed for use with YSI Professional Plus handheld multiparameter meter and a compatible probe. The sensor is field replaceable and easy to attach to the probe, with no tools required. Maximum depth rating for the sensor is 17m/56ft. The user can select one, two, or three point calibration. The YSI 605105 sensor has a six-month warranty.SpecificationsChloride ISE range0 to 1000mg/LTemperature range0 to 40 degrees C/32 to 104 degrees FAccuracy rating+ or – 15 percent of reading or 5mg/L, whichever is greaterCalibration 1, 2, or 3 point (user selectable)Depth rating17m/56ft.Warranty6 monthsA multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts or other compounds present in water), dissolved oxygen (DO, the amount of oxygen in a liquid), temperature, total dissolved solids (TDS, anything present in water other than the pure water molecule and suspended solids), salinity, resistivity, and oxidation reduction potential (ORP). Applications for multiparameter meters include water testing, pharmaceuticals, agriculture, winemaking, water-treatment plants, and aquaculture. Devices with a benchtop body are often used for indoor laboratory use or in a manufacturing setting; handheld, portable devices are typically used for fieldwork. Sensors are used with a meter to measure the parameters of a substance.YSI is a manufacturer of sensors, instruments, software, and data collection platforms for environmental water quality monitoring and testing. The company, founded in 1948 and headquartered in Yellow Springs, OH, meets International Organization for Standardization (ISO) 9001 standards.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI7609829-11

The Hanna Instruments HI 7609829-11 chloride ISE sensor with O-ring is a combination solid-state sensor for detecting free chloride ions in fresh-water samples. This ISE (ion selective electrode) sensor is designed for use with the HI 9829 or HI 98290 GPS multiparameter meter and a compatible digital probe in environmental monitoring. It is useful for measuring surface-water contaminants, such as tracing the source of roadway runoff or studying naturally occurring chloride levels in natural waters. The sensor is field replaceable and easy to attach, with color-coded screw-type connectors. It has a double-junction connector and a solid gel-filled reference electrode to increase resistance. This sensor is used in place of the pH sensor in the probe. The pH/mV reading is also displayed, which can be compared for troubleshooting. HI 7609829-11 sensor measurements are International Organization for Standardization (ISO) 7027 compliant.SpecificationsChloride ISE range0.6 to 200.0ppmTemperature range0 to 40 degrees C/32 to 104 degrees FDepth rating20m/65ft.Dimensions118 x 15mm/4.6 x 0.6 inches (H x W)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right.A multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts or other compounds present in water), dissolved oxygen (DO, the amount of oxygen in a liquid), temperature, total dissolved solids (TDS, anything present in water other than the pure water molecule and suspended solids), salinity, resistivity, and oxidation reduction potential (ORP). Applications for multiparameter meters include water testing, pharmaceuticals, agriculture, winemaking, water-treatment plants, and aquaculture. Devices with a benchtop body are often used for indoor laboratory use or in a manufacturing setting; handheld, portable devices are typically used for fieldwork....

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Field Meters are perfect indoors or outdoors-durable plastic case protects meters and accessories from the elements. Field meters include an epoxy-body electrode, batteries, buffer solutions, deionized water, and carrying case. Designed for field use Display is ideal for quick checks at a glance High accuracy at an exceptional price

Manufacturer: Ohaus Brand: Ohaus Model: ST2100F

After more than a century of perfecting the art of measurement through our durable weighing products, OHAUS precision is now available in a line of benchtop pH meters. Starter 2100 is the economical choice for applications requiring simple pH measurement.

Manufacturer: HACH Brand: Hach Company Model: HQ411D

Designed for your water applications, the Hach HQ430d laboratory meter is an advanced meter that takes the guesswork out of measurements. HQd meters connect with IntelliCAL probes that automatically recognize the testing parameter, calibration history, and method settings to minimize errors and setup time.