|
|
-
4.7 of 5.0 with 4 Reviews
SALE PRICE: $244.15
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, Pulse, LED, W96xH48mm, 5-Digit, 13 Modes, Indicator, PV (4-20mA) transmission output, 24VDC
-
4.7 of 5.0 with 16 Reviews
SALE PRICE: $272.68 25% OFF
Manufacturer: YSI
Brand: YSI
Manufacturer: YSI
Brand: YSI
-
4.7 of 5.0 with 13 Reviews
SALE PRICE: $320.00 36% OFF
Manufacturer: Hitech
Brand: Hi-Tec
Model: PCT-407
Manufacturer: Hitech
Brand: Hi-Tec
Model: PCT-407
Rugged design with splash proof housing for handheld or bench top use,neck strap for hands-free operation. Automatic temperature compensation(ATC)Manual Salinity(MSC) and Altitude(MAC) Compensation. Memory function stores and recalls.MAX/MIN and data lock.Degree C/F are switchable. Low battery and consumption indicatior.Auto shut off after 10 minutes of non use. pH Range -2.00~16,00pH,ORP -1999~-200mV 500~2000mV..
-
4.7 of 5.0 with 44 Reviews
SALE PRICE: $324.48
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
HI 9813-0 allows you to measure pH, EC (conductivity) and TDS with just one instrument! This meter has a full-spectrum pH measurement range. The EC range goes to 4.00 mS/cm. In the TDS range, both instruments use a conversion factor from 0.56 to 0.72 for fertilizer readings, to ensure your measurements fully conform to industry standards. The specially engineered HI 1285-0 probe is interchangeable and the pH electrode utilizes a fiber junction and gel electrolyte which are particularly suitable when used in fertilizer solutions.HI 9813-0 measures TDS in the 0 to 1999 ppm range.Range pH 0.0 to 14.0 pH Range EC 0.00 to 4.00 mS/cm Range TDS 0 to 1999 ppm (mg/L) Range Temperature 0.0 to 60.0°C Resolution pH 0.1 pH Resolution EC 0.01 mS/cm Resolution TDS 1 ppm (mg/L) Resolution Temperature 0.1°C Accuracy pH ±0.1 pH Accuracy EC ±2% F.S. Accuracy TDS ±2% F.S. Accuracy Temperature ±0.5°C
-
4.7 of 5.0 with 47 Reviews
SALE PRICE: $338.08 11% OFF
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, DC Amps, LED, W72xH36mm, 4-Digit, 0-5A Input, Relay Output, 100-240 VAC
-
4.7 of 5.0 with 20 Reviews
SALE PRICE: $500.00 7% OFF
Manufacturer: GW Instek
Brand: GW Instek
Model: GDM-8351
Manufacturer: GW Instek
Brand: GW Instek
Model: GDM-8351
|
GW Instek presents the brand new 5 1/2 Digit Dual Measurement Multimeter─ GDM-8351 to replace GDM-8251A of the same category. GDM-8351 features VFD dual-display, maximum 120,000 counts, 0.012% basic DC voltage accuracy and USB/RS232C connectors to provide users with measurement precision, lucid data observation, and the convenient connection with the personal computer.In addition to the fundamental measurement items such as AC/DC voltage, AC/DC current, AC+DC voltage/current, 2W/4W resistance, frequency, temperature measurement, continuity beeper and diode test, GDM-8351 also equips with the capacitance measurement function. Furthermore, the GDM-8351 also provides many auxiliary functions, including maximum/minimum values, dB, dBm, compare, reading hold, algorithms (MX+B, 1/X, %) etc. to meet the measurement requirements for manufacturing process tests, educational experiments and testing facilities.For the external control, the pin of digital I/O interface not only provides the signal output frequently used by the compare function, but also allows users to define signal output for each pin. Under the self-definition mode, users can apply the I/O as a simple digital hardware. The external control requirement can be achieved by signals from each pin so as to help users reduce trouble of making hardware. With respect to remote control and retrieving data, GDM-8351, taking consideration of users’ habitual practice and universal system interface, provides standard RS-232C and USB interface to edit control programs and read measurement results. It is worth noting that for utilizing the USB interface, users have options of selecting either USBCDC or USBTMC mode. While USBTMC is selected, users are able to control instrument with the USB interface exactly the same as controlling instrument with the GPIB interface; therefore, the relatively expensive GPIB connection cable is no longer required.
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $97.99 25% OFF
Manufacturer: Spectra Precision Lasers
Brand: Spectra Precision Lasers / Trimble
Model: QM75
Manufacturer: Spectra Precision Lasers
Brand: Spectra Precision Lasers / Trimble
Model: QM75
Spectra Precision QM75 Quick Measure distance meter comes with the handheld meter, batteries, pouch and operator's manual. The QM75 is a fast, high accuracy laser distance meter designed for indoor and outdoor use. It is one of the smallest laser distance meters available, fitting comfortably in your hands and in your pocket. It is handy for difficult vertical measurements, cluttered environments, over water and other measurements for which tape measures are not convenient. The QM75 is designed and built specifically for the tough construction environment. Use of engineered plastics, generous use of rubber over-mold and clever electronic isolation make the Quick Measure family of distance meters the most robust available. They stand up to tough job site conditions.
-
4.6 of 5.0 with 8 Reviews
SALE PRICE: $159.54 22% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI7698294
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI7698294
|
The Hanna Instruments HI 7698294 short flow cell allows sample collection and field monitoring of fresh, brackish, and sea water when used with the HI 9829 or HI 98290 GPS multiparameter meter and a compatible digital probe in a fixed, flow-through monitoring station with a pump. The short flow cell encases the digital probe during sample collection and field monitoring, protecting the probe from debris and rough water conditions. The flow cell is suitable for environmental field monitoring and sampling.A multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts or other compounds present in water), dissolved oxygen (DO, the amount of oxygen in a liquid), temperature, total dissolved solids (TDS, anything present in water other than the pure water molecule and suspended solids), salinity, resistivity, and oxidation reduction potential (ORP). Applications for multiparameter meters include water testing, pharmaceuticals, agriculture, winemaking, water-treatment plants, and aquaculture. Devices with a benchtop body are often used for indoor laboratory use or in a manufacturing setting; handheld, portable devices are typically used for fieldwork. Sensors are used with a meter to measure the parameters of a substance.Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) standard 9001.
-
4.6 of 5.0 with 42 Reviews
SALE PRICE: $178.92
Manufacturer: Oakton Instruments
Brand: Oakton Instruments
Model: WD-35425-00
Manufacturer: Oakton Instruments
Brand: Oakton Instruments
Model: WD-35425-00
Great for water, laboratory or plant use, the Oakton WD-35425-00 PC Testr 35 features single-junction pH electrodes for longer life and wider range of sample compatibility. Pin-style conductivity sensors feature stainless steel electrodes for chemical resistance and durability. Replaceable sensor module saves you money by reusing the meter body. Advanced features of the WD3542500 include auto-shutoff, user-adjustable temperature coefficient and low-battery indicator. Up to 5 point pH calibration with NIST or USA autobuffer recognition
-
4.6 of 5.0 with 34 Reviews
SALE PRICE: $180.00 1% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI99300
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI99300
|
The Hanna Instruments HI 99300N waterproof portable meter with multiparameter probe displays low-range electrical conductivity (EC) and total dissolved solids (TDS) on a large LCD screen that shows the primary reading, temperature, and calibration guides for applications such as water conditioning, fish farming, agriculture, and water treatment. The meter provides single point, automatic calibration with Automatic Temperature Compensation (ATC). On-screen icons indicate meter status. Tutorial messages guide users through meter operation and calibration steps. Percentage of remaining battery charge is displayed at meter start-up, and a battery icon appears on the display when only a few hours working time are remaining.The HI 76306 EC and TDS probe has a built-in temperature sensor for simultaneous conductivity and temperature readings. The housing of this meter is rated to IP 67 level of protection against dust and short periods of immersion in water. It has a DIN (Deutsches Institut für Normung) connector and 1-meter/3.3-foot cable that attaches at the bottom of the meter to stay out of the way. The meter comes with a carrying case, three 1.5V AAA batteries, and instructions.SpecificationsConductivity range0 to 3,999μ/cmConductivity accuracy+ or – 2% (full scale)TDS range0 to 2,000ppm (mg/L)TDS accuracy+ or – 2% (full scale)Temperature range0 to 60 degrees C/32 to 140 degrees FTemperature accuracy+ or – 0.5 degree C/1 degree FProbe (included)HI 76306Battery type, life(3) 1.5V AAA, approximately 500 hoursWeight205g/7.2oz.Dimensions152 x 58 x 30mm/6.0 x 2.3 x 1.2 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.A multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts or other com...
|
|