Water Quality & Instrumentation - Page 250

Manufacturer: Blue-White Brand: Blue-White

F-300 series flow meters utilize a pitot tube pick up and a hard edged float design to provide a convenient and economic means of measuring water flow in a closed pipe system. The F-300 impact tube flow meter features a tough, one-piece machined acrylic meter body, corrosion resistant internal parts, and permanent screen-printed scale. You get all the strength and long service life required in most commercial and industrial applications. Flowmeters are installed after the filtration system in Commercial Pool applications. This enables the service persons, or Health Inspector to tell at a glance if the recirculating pump is pushing an adequate amount of water to ensure optimum water turnover (filtration).

Manufacturer: BW Technologies Brand: BW Technologies Model: H-010-0004-000

Smoke generating tubes are designed for use in respirator fit tests. These tubes are of the stannic chloride type required by OSHA for use in the irritant smoke fit test procedure. The tubes can also be used for visualizing air currents, such as in testing the performance of fume hoods or in detecting leaks from an air duct.

Manufacturer: Ohaus Brand: Ohaus

Convenient salinity testing with an economical solution! This simple-to-use salinity pen meter offers fast and accurate results. With it, you can measure a sample?s salinity, or dissolved salt content in a liquid, using just one hand! The meter is designed with durable IP67 waterproof housing, protective cap that safeguards the sensor, and automatic shutdown to preserve battery life. It also comes with a storage case and wrist strap. ATC Without Temperature DisplayAutomatic Shutdown After 6 Minutes of Non-Use

Manufacturer: HACH Brand: Hach Company Model: 4849000

Data Transfer Adapter for RS-232 interface, includes cable.

Manufacturer: UNICO Brand: Unico

UNICO Square Cuvettes, Optical Glass, Set Of Two S-90-304G

Manufacturer: DATALOGIC SCANNING Brand: DATALOGIC SCANNING

DATALOGIC ADC, STAND, STAND FOR MAGELLAN 1100I GRAY 20 CM FLEXIBLE GOOSENECK STAND

Manufacturer: Thermco Brand: THERMCO

API, COMBINED HYDROMETERS, 0/150F - 15" 10/45

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98308

Pure Water Test (PWT) enables users to check the purity of your distilled or demineralized water in laboratory or industrial environments. PWT is suited for fields such as printed circuit board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralized or pure water is used. This tester is housed in a durable case that provides excellent protection against harsh industrial environments. Range: 0.0 to 99.9 microsiemens/cm. Resolution: 0.1 microsiemens/cm. Accuracy: +/-2 percent F.S. Calibration: manual, 1 point. Temperature Compensation: automatic, 0 to 50 degree C (32 to 122 degree F). Battery Type/Life: 4 by 1.5V/approximate 250 hours of continuous use. Environment: 0 to 50 degree C (32 to 122 degree F); RH max 95 percent. Weight: 3.4 oz. Measures 1-19/32" length by -57/64" width by 6-57/64" height.

Manufacturer: Sensorex Brand: Sensorex Model: SDA-7003

The sda-7001 replacement salt bridge extends the lifetime of the SD7000/SD7500/SD7420 pH and ORP (redox) sensors. SDA-7003 is a Pack of three (3) sda-7001 salt bridges. Order sds-7015 or sds-7025 (standard cell refill solution) when replacing salt bridges. Also compatible with some sensors from other brands, including Hach and water Analytics. Hach is a registered trademark of danaher. Water Analytics is a registered trademark of water Analytics. No affiliation, endorsement or sponsorship is stated or implied.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

Individually boxed. Minimum sample volume: 7 mL. Require liquid bath depth of 203 mm (8"). Calibrated viscometers are supplied with a certificate of calibration and instruction sheet. Viscometers have the serial number and size printed on the outside of the box and on the viscometer. Additional sizes are available on special order. Holder not supplied. See Thomas numbers 9726M50 and M53 for holders.