Water Quality & Instrumentation - Page 312

Manufacturer: Thomas Scientific Brand: Varsal Model: 406-33-I50

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers.

Manufacturer: Thomas Scientific Brand: Varsal Model: 406-318-I50

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

science-lab-flowmeters

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/IP/RF-11 U-tube reversed-flow viscometer has a 60,000 to 300,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 300 centistokes per second (cSt/s) for calculating kinematic viscosity. The BS/IP/RF-series size 11 viscometer uses a 280mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This U-tube reversed flow viscometer meets the ASTM International D446 standard for reversed-flow viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to mee...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/IP/RF-8 U-tube reversed-flow viscometer has a 2,000 to 10,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 10 centistokes per second (cSt/s) for calculating kinematic viscosity. The BS/IP/RF-series size 8 viscometer uses a 280mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This U-tube reversed flow viscometer meets the ASTM International D446 standard for reversed-flow viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet ind...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUC-350 calibrated viscometer has a 100 to 500 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.5 centistokes per second (cSt/s) for calculating kinematic viscosity. The CUC-series size 350 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This viscometer is suited for use at temperatures above 93 degrees C (200 degrees F) or below -18 degrees C (0 degrees F) and meets the ASTM International D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process ...

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, DC Amps, LED, W72xH36mm, 4-Digit, 0-5A Input, Relay + RS485 Communication Output, 100-240 VAC

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, DC Volts, LED, W96xH48mm, 4-Digit, 0-500V Input, 3 PNP Outputs + BCD Output, 100-240 VAC

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, DC Amps, LED, W96xH48mm, 4-Digit, 0-5A Input, 3 NPN Outputs + RS485 Output, 100-240 VAC

Manufacturer: Varsal, Inc. Brand: Varsal Model: 450-317B-I50

Varsal manufactures UV-VIS-NIR spectrophotometer cells and cuvettes, including micro-cells. Our unique fire-fused production technology assures long lasting, easy to clean, high performance cells. Varsal cells can be used with all commonly used spectrophotometers to measure absorbance or transmission and they comply with all international standards. Depending on the spectral range to be analyzed, Varsal spectrophotometer cells are available in optical glass, quartz and IR quartz glass. Our technical ability to produce cells that meet the demanding specifications of instrument manufacturers is only surpassed by Varsal's customer service and on-time delivery. Wavelength zone: 160/400 newton meters. Percentage transmission: >80%@240 newton meters. Matching tolerance: within 0.3%@240 newton meters