Water Quality & Instrumentation - Page 35

Manufacturer: Extech Brand: Extech Model: RF10

' Portable Analog Brix Refractometer, 0 to 32 Percentage '

Manufacturer: Chemplex Brand: Chemplex Model: 150-PP

Thin-film rolls pre-perforated at 3" lengths are also available for analysts with a preference to continuous rolls and would like the convenience of dispensing pre-cut sections. Simply detach three square inch sections from the bulk roll at the perforations as required. Each roll is 300' in length by 3" wide. A single pre-perforated roll serves to prepare 1200 samples at 3 in2 per sample.

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The Hanna Instruments HI 96106 is a compact pH tester used in laboratory and industrial applications, and has manual one-point calibration, a single-line LCD screen, a protective cap, and a built-in pocket clip. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The single-line LCD screen of this meter shows the current measurement. The meter has manual temperature compensation and manual one-point calibration through a trimmer on the back. A protective cap keeps the sensor moist when stored upright. Three 1.5V AA batteries provide approximately 150 hours of use. The meter also comes with a calibration screwdriver and instructions. SpecificationspH range0.0 to 14.0pH resolution.1pH accuracy+ or - .2Operating temperature0 to 50 degrees C (32 to 122 degrees F)Operating relative humidity95 percentDimensions150 x 30 x 21mm/5.9 x 1.2 x 0.8 inches (H x W x D)Meter weight without probe70g/2.5oz.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments from laboratories to field research and manufacturing facilities. Researchers, manufacturers, and hobbyists use a pH meter in aquaculture, agricultural, wine-making, and water-testing, and for scientific applications. Some pH meters may measure additional parameters such as dissolved oxygen (DO), conductivity (also called electro-conductivity or EC), temperature, total dissolved solids (TDS), salinity, resistivity, or oxygen reduction potential (ORP)/mV.Hanna Instruments manufactures analyti...

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Dwyer® Series WMT2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges even in low flow applications. The meter is designed for long service life and relatively maintenance-free operation, even under adverse conditions. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. The reed switch is activated by a magnet on the dial, which is directly proportional to the flow rate. The output is perfect for remote monitoring of flow rate or flow totalization, and can interface with PLC's, counters, data loggers, and SCADA systems. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).

Manufacturer: Baoshishan Brand: Baoshishan

Product Description: This is a Zahn type Cup Viscometer which are used to measure the flow behavior of liquids such as paints and is in very nice condition.Applicable to the construction site to quickly measure the viscosity of the paint to be sprayed; more widely used in electronic products, plastic coatings industry. The cup and Iwata spray gun together become essential plant construction tools. 1:using a suitable solvent to wipe clean， when before or after the cup be used。 2:put the cup into the container body 1- 5 minutes, to achieve thermal equilibrium of the cup body,then put the cup body vertical lift from the feedstock, the action should be fast and stable. 3:Timekeeping when the upper end of the cup leave from the surface of Liquid， and liquid should be kept out of the cup vertically, with the surface distance of not more than 150mm. 4 :Stop timing when the first breakpoint occurs, and the difference between the two measured values should be less than 5% of the average. NOTE: Please give us your phone number which is to ensure a smooth and safe delivery. And we can also send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Chemplex Brand: Chemplex Model: 475

Thin-Film Sample Support Windows are available in Continuous Rolls, Pre-Perforated Rolls and Pre-Cut Circles interleaved with lint-free tissue carriers, in addition to SpectroMembrane Thin-Film Sample Support Window Carrier Frames. Fabrication and storage of all thin-films is performed under environmentally controlled conditions and immediately individually shrink-wrapped in clear plastic to preserve the original integrity. These extra precautionary measures are necessary to avoid the potential possibility of inadvertently introducing trace levels of contaminates that may affect x-ray data.

Manufacturer: Chemplex Brand: Chemplex Model: 100-PP

Thin-film rolls pre-perforated at 3" lengths are also available for analysts with a preference to continuous rolls and would like the convenience of dispensing pre-cut sections. Simply detach three square inch sections from the bulk roll at the perforations as required. Each roll is 300' in length by 3" wide. A single pre-perforated roll serves to prepare 1200 samples at 3 in2 per sample.

Manufacturer: Vee Gee Scientific Brand: Vee Gee Scientific Model: BTX-20

The VEE GEE BTX-20 is a handheld, portable, water-resistant sugar refractometer with a Brix scale that measures in the 0.0 to 32.0% range, is powered by ambient light, has automatic temperature compensation (ATC), an optical glass prism, and a durable metal body with rubber grip. A Brix refractometer measures the refractive index of a solution in a sample, converts it to sugar concentration in units of percent by weight (% Brix, also known as degrees Brix), and displays the results. Handheld refractometers, also known as sugar meters, concentration meters, or Brix meters, are commonly used in the culinary, food and beverage, pharmaceutical, educational, geological, chemical, and ecological industries, and for water-testing applications. This refractometer is housed in a durable metal body. The VEE GEE BTX-20 features ATC for immediate, accurate readings, with an ambient temperature of 10 to 30 degrees C. The unit is factory-calibrated and can be calibrated with distilled water. Calibration can be controlled and adjusted with a tool-free calibration ring and a set screw. The outer shell is rubber coated with dimpled grip for easy gripping and the rubber coating guards against hand heat for accurate measurements. A non-roll stand prevents the unit from rolling when placed on a flat surface such as a table or bench top. The optical glass prism is mounted in an all-metal housing composed of copper alloy with a nickel-chrome coating for quick temperature equilibrium between the sample and the prism. The analog Brix scale features a bright, high-contrast display for clear visibility of the boundary and memory lines intersection. Instantaneous sample readings illuminated by ambient light are viewed through a monocular, focusable, cushioned eyepiece. The unit comes with a zippered vinyl carrying case, a plastic transfer pipet and an instruction manual. Specifications Measurement scale range Brix 0.0 to 15.0% Specimen measurement temperature range 10 to 30 degrees Accuracy Brix + or - 0.1%, Temper...

Manufacturer: Vee Gee Scientific Brand: Vee Gee Scientific Model: CTX-2

The VEE GEE CTX-2 is a handheld, portable, water-resistant antifreeze and battery charge level refractometer that measures the freezing point of propylene glycol in the -50.0 to 32.0 degrees F range, freezing point of ethylene glycol in the -60.0 to 32.0 degrees F range, and the specific gravity (SG) of battery acid in the 1.10 to 1.40 range, has automatic temperature compensation (ATC), and a durable metal body with rubber grip. Handheld refractometers, also known as sugar meters, concentration meters, or Brix meters, are commonly used in the culinary, food and beverage, pharmaceutical, educational, geological, chemical, and ecological industries, and for water-testing applications. This refractometer is housed in a durable metal body. The VEE GEE CTX-2 features ATC for immediate, accurate readings, with an ambient temperature of 10 to 30 degrees C. The unit is factory-calibrated and can be calibrated with distilled water. Calibration can be controlled and adjusted with a tool-free calibration ring and a set screw. The outer shell is rubber coated with dimpled grip for easy gripping and the rubber coating guards against hand heat for accurate measurements. A non-roll stand prevents the unit from rolling when placed on a flat surface such as a table or bench top. The optical glass prism is mounted in an all-metal housing composed of copper alloy with a nickel-chrome coating for quick temperature equilibrium between the sample and the prism. The analog Brix scale features a bright, high-contrast display for clear visibility of the boundary and memory lines intersection. Instantaneous sample readings illuminated by ambient light are viewed through a monocular, focusable, cushioned eyepiece. The unit comes with a zippered vinyl carrying case, a plastic transfer pipet and an instruction manual. Specifications Measurement scale range Freezing point of propylene glycol -50.0 to 32.0 degrees F, Freezing point of ethylene glycol -60.0 to 32.0 degrees F, Specific Gravity (SG) of battery acid 1.10 to 1.40 Spe...

Manufacturer: The Harris Products Group Brand: Harris Model: 3100200

The Model 355-2 incorporates a regulator and flowmeter into one compact unit. The flow tube and float are easily changed for different gases. As supplied, the flow tube has dual calibration. It includes a sensitive needle valve for finger tip control.