Water Quality & Instrumentation - Page 357

Manufacturer: GPI Brand: GPI® The Proven Choice® Model: 039-TM050-N

TM series water meters are an accurate and economical alternative to traditional water meters. The TM050-N has a 0.5-inch FNPT fitting and is accurate to +/-3 percent of reading for flow rates from 1 to 10 GPM. TM water meters offer both flow rate and flow totals and are constructed from durable PVC to meet Schedule 80 PVC specifications. The TM050-N is easy to install and comes with a low-profile, LCD display powered by 2 lithium batteries. Ideal for use with irrigation systems, water processing applications, OEM water treatment equipment/skids, sub-metering of facility water usage, small waste water treatment equipment, and water based cooling systems.

Manufacturer: Datalogic Brand: Datalogic

Pistol Handle (Can Be Added In The Field) For The Elf Pda

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The Hanna Instruments BL 983322-1 panel-mounted conductivity controller and indicator has automatic temperature compensation (ATC), automatic or manual dosing modes, an overtime control system, and an LED screen. ATC helps to increase accuracy of readings and eliminates the need for additional calculations. The overtime control system, which helps prevent overdosage, can be set for 5 to 30 minutes. If the relay runs longer than the specified time, it notifies the user and shuts off. The multi-color LED display confirms automatic or manual dosing mode, and whether the controller has exceeded the time limit. The controller has single-point calibrations and is cased in fire retardant acrylonitrile butadiene styrene (ABS) plastic. It comes with two plastic mounting brackets. This controller is commonly used for laboratory applications, including water conditioning. Measurement range is 0.00 to 19.99 us/cm, resolution is 0.01 us/cm, and accuracy is + or – 2% f.s. at 20 degrees C/68 degrees F. ATC operates from 5 to 50 degrees C/41 to 122 degrees F. The controller measures 83 x 53 x 99mm/3.3 x 2.1 x 3.9 inches (H x W x D), and it weighs 300g (10.6oz). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The controller requires the HI 7634-00 EC/TDS probe (sold separately), and operates on 115/230 Vac; 50/60 Hz power supply. A controller/transmitter reads parameters, and automatically adjusts the solution to the programmed set points. It is used to monitor and control parameters in process water, wastewater treatment, chemical processes, and aquaculture applications. Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 standards. What’s in the Box? Hanna Instr...

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-628/H526-008-NC#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|4 - 28 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 1.0 Specific Gravity Water Media

Manufacturer: Cannon Instrument Brand: CANNON Instrument

Reverse-flow type, for measurement of kinematic viscosity of dark Newtonian liquids according to ASTM D 445 and ISO 3104. Permit measurements of liquids whose meniscus cannot be seen at the timing marks when using Cannon-Fenske Routine-type viscometer. Used to measure kinematic viscosity of liquid (cutback) asphalts and road oils at 60°C (140°F) in range of 30 to 6000 centistokes according to ASTM D 2170. Also used to study lubricating oils at low temperatures when investigating the effect of various additives on lubricating and hydraulic oils. External pressure can be applied to vary shear stress and shear rate. cifications conform to ASTM D 446 and ISO 3105.

Manufacturer: UNICO Brand: Unico

UNICO Square Cuvettes, Quartz, 10 Mm S-90-309Q

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer Model: RMC-144-SSV

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: Romack Brand: Romack

Manufacturer: Cannon Instrument Brand: CANNON Instrument

Reverse-flow type, for measurement of kinematic viscosity of dark Newtonian liquids according to ASTM D 445 and ISO 3104. Permit measurements of liquids whose meniscus cannot be seen at the timing marks when using Cannon-Fenske Routine-type viscometer. Used to measure kinematic viscosity of liquid (cutback) asphalts and road oils at 60°C (140°F) in range of 30 to 6000 centistokes according to ASTM D 2170. Also used to study lubricating oils at low temperatures when investigating the effect of various additives on lubricating and hydraulic oils. External pressure can be applied to vary shear stress and shear rate. cifications conform to ASTM D 446 and ISO 3105.

Manufacturer: Horiba Brand: HORIBA Model: 3200044431

Activated Alumina, 90 Gram.