Water Quality & Instrumentation - Page 37

Manufacturer: Nutradip (Tri Meter) Brand: Nutradip (Tri Meter)

The Nutradip Ph Meter Will Continuously Measure The Acidity Or Alkalinity Level Of Your Nutrient Solution, A Critical Factor In Successful Hydroponic Growing. The Maintenance Of Proper Ph Levels In Soilless Gardening Is Critical To Plant Health And Yield. An Imbalanced Ph Level In The Nutrient Solution Can &Quot;Lock Out&Quot; Nutrients And Cause Plant Deficiencies When The Ph Is Too Low (More Acidic). Alternately, Nutrient Will Become Trapped And Over-Fertilize The Plant(S) When The Alkalinity Is Too High.

Manufacturer: Elster AMCO Brand: Scancounter

Wired Remote Reader. The ScanCounter T210 electronic outreader is designed specifically for accurate counting of meter pulse outputs. It incorporates an easy to read display. Inexpensive and reliable, the ScanCounter T210 is a cost effective solution to meter reading access problems. The ScanCounter T210 is installed in a location easily accessed by the meter reader. Connected to the meter pulse output by wire, the T210 accumulates pulses from the meter and stores the reading.

Manufacturer: Racine Federated Brand: Hedland Model: H621-004-R

EZ-View flow meters for water. EZ to install, in any position. Radel R for more aggressive media. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Radel R plastic body and cone, polysulfone piston. Common parts are T300-series stainless spring, Buna N indicator ring, Buna N pressure seals, plastic polysulfone fittings, Polypropylene limit indicators, PH15 - 7MO stainless retaining ring. Optional are Teflon coated spring and retaining ring. NPT ANSI/ASME B1.20.1, BSPT ISOR7 fittings/ threads.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

Individually boxed. Minimum sample volume: 7 mL. Require liquid bath depth of 203 mm (8"). Calibrated viscometers are supplied with a certificate of calibration and instruction sheet. Viscometers have the serial number and size printed on the outside of the box and on the viscometer. Additional sizes are available on special order. Holder not supplied

Manufacturer: Hanna Brand: Hanna Instruments Model: HI-98127-HANNA INSTRUMENTS

Waterproof and designed to float. Automatic Temperature Compensation. Automatic calibration. Tactile grip casings. HOLD function. Automatic shut-off. Efficient two button operation. Temperature in °C or °F. BEPS (Battery Error Prevention System). Battery % displayed at startup. The pHep4 tester is for users that require the greatest accuracy and features while staying economical. This model has BEPS as well as user selectable automatic shut-of, replacable pH electrode cartridg, stability indicator and automatic calibration. Order Information:. HI 98127 (pHep4) is supplied with HI 73127 pH electrod, HI 73128 electrode removal too, batteries and instructions. Specfications: Range pH -2.0 to 16.0 pH. Temperature -5.0 to 60.0°C / 23.0 to 140.0°F. Resolution pH 0.1 pH. Temperature 0.1°C / 0.1°F. Accuracy 20°C pH 0.1 pH. Temperature 0.5°C / 1°F. pH Calibration automati, at one or two points with two sets of standard buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18). Temperature Compensation Automatic. Battery Type / Life 1.5V (4) / approximately 300 hours of continuous use; auto-off after 8 minutes of non-use. Environment -5 to 50°C (23 to 122°F); RH max 100%. Length: 8.2. Height: 1.3. Width: 2.7

Manufacturer: Sensorex Brand: Sensorex Model: CS150TC-K=1.0 TC=PT1

Our laboratory/low cost light industrial conductivity sensors feature Graphite or Platinum ring technology. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. The low cost yet high quality Sensorex conductivity probes are suitable for use with most portable conductivity meters. By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank. Our general purpose models CS150 and CS150TC feature graphite measuring elements and the same durable epoxy body. For many applications, the epoxy body conductivity sensors are the lowest cost, most reliable conductivity sensor to use, especially for process or portable applications. Models CS200 and CS200TC feature platinized measuring surfaces that provide accurate and repeatable measurements. Rugged epoxy bodies make the sensors virtually unbreakable. These are an excellent choice to use as standard laboratory conductivity electrodes.

Manufacturer: YSI Brand: YSI Model: PH10

The YSI pH10A is a compact pH tester used in laboratory and industrial applications, and has Automatic Temperature Compensation (ATC), automatic one- or two-point calibration, a multilevel LCD screen, a replaceable electrode, and waterproof, dustproof housing. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The multilevel LCD screen of this meter shows the current measurement and the current temperature. A hold feature locks stable readings on the display and a non-volatile memory records 50 sets of pH and temperature measurements with a date and time stamp. The meter has ATC and automatic calibration with two sets of memorized buffers: USA (4.01, 7.00, and 10.01) or National Institute of Standards and Technology (NIST) (4.01, 6.86, and 9.18). Four 1.5V button batteries provide 200 hours or greater of use. A built-in belt clip provides the ability to hang the meter. The meter also comes with instructions. Specifications pH range0.00 to 14.00Temperature range0.0 to 100.0 degrees C (32.0 to 212 degrees F)pH resolution.01Temperature resolution0.1 degrees C (0.2 degrees F)pH accuracy+ or - .1 within 10 degrees C of calibration or + or - .2 within 20 degrees CTemperature accuracy+ or – .3 degrees C (.6 degrees F)Operating temperature0.0 to 50.0 degrees C (32.0 to 122.0 degrees F)Dimensions265 x 29 x 15mm/10.4 x 1.1 x 0.6 inches (H x W x D)Meter weight105g/3.7oz.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments from lab...

Manufacturer: Shanghai Sanxin Instrumentation Brand: Apera Instruments, LLC Model: AI316

The Apera Instruments PC60 Multi-parameter Tester simply tests pH, EC, TDS, Salinity &Temperature in an ACCURATE, QUICK & Professional manner for all kinds of regular water solutions such as hydroponics, aquaculture, pools& spas, tap/drinking water, water treatment, cooling towers, etc. The multi-parameter probe is replaceable. 1 to 3 points of Auto Calibration and 0 to 50˚C Auto Temperature Compensation (ATC), ±0.01 pH, ±1% F.S, 0.5˚C accuracy with -2.00 to 16.00 pH & 0 to 20.00 mS/cm measuring range, auto recognition and reminders of stable values improves consistency, saving you the trouble of guessing when to manually hold measurement (auto hold function available). Easy menu setting, customizing your tester’s functions according to your needs. Smart self-diagnosis, warning of out-of-range measurement and incorrect calibrations. IP67 waterproof and dustproof, floating on water so you don’t have to worry if it falls into water by accident. Up to 2000 hours' continuous operation (without backlit) powered by AAA batteries (with low power warning and auto power off in 8 min if no operation). Comes with a complete kit of premixed calibration solutions (4.00 and 7.00), soaking solutions (3M KCL), calibration bottles, AAA batteries, and a lanyard all in a portable carrying case. The meter is CE certified and comes with a 2-YEAR Warranty (6 months for the probe). The company designs and manufactures scientific analytical instruments like meters and sensors for pH, conductivity, turbidity, and dissolved oxygen for over 25 years, and meets ISO 9001:2008 Standards. NOTES: The instrument will NOT give accurate or stable readings for distilled or deionized water's pH testing (conductivity testing works well in distilled water). This is because distilled and deionized water do not have enough ions present for the electrode to function properly in pH measuring. To measure distilled or deionized water’s pH, users need to use a specialized pH electrode. Do NOT store the probe in distille...

Manufacturer: LaMotte Brand: LaMotte Model: 7519-01

One sample tube is filled with sample; another with turbidity-free water. A standard turbidity solution is added dropwise to the second tube until the turbidity in the 2 tubes match. The number of drops is multiplied by a factor to calculate the turbidity.

Manufacturer: Milwaukee Instruments Brand: Milwaukee Model: MA884

The MA884 is optical instrument that is based on the measurement of the refractive index of a solution. The measurement of refractive index is simple and quick and provides the vintner an accepted method for sugar content analysis. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds the instrument measures the refractive index of the grape. This digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for measurements in the field.