|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $225.00
Manufacturer: Racine Federated
Brand: Hedland
Model: H600A-015
Manufacturer: Racine Federated
Brand: Hedland
Model: H600A-015
Flow Meter For Petroleum Fluids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 0.876 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. COMMON PARTS are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: SAE 1070/1090 Carbon Steel, Retaining Spring: SAE 1070/1090 Carbon Steel, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $233.00
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Dwyer® Series WMT2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges even in low flow applications. The meter is designed for long service life and relatively maintenance-free operation, even under adverse conditions. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. The reed switch is activated by a magnet on the dial, which is directly proportional to the flow rate. The output is perfect for remote monitoring of flow rate or flow totalization, and can interface with PLC's, counters, data loggers, and SCADA systems. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $239.00 1% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 83033961
Manufacturer: Ohaus
Brand: Ohaus
Model: 83033961
The Ohaus Starter 300 portable meters offer convenience, reliability and durability in one compact design. The ST300 pH/ORP meter features a crisp, well-organized LCD display with five clearly marked keys, built-in stand for benchtop use, auto buffer recognition, up to 3 calibration points, memory for up to 30 measurements plus last calibration data, automatic & manual temperature compensation, IP54 protection and 3-in-1 plastic gel pH electrode. Also includes, wrist strap, 4 "AAA" batteries and pH buffer powder sachet. (ORP electrodes sold separately).
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $257.45
Manufacturer: Atlas Scientific
Brand: Atlas Scientific
Model: ATL-kits-DO
Color: Yellow
Manufacturer: Atlas Scientific
Brand: Atlas Scientific
Model: ATL-kits-DO
Color: Yellow
|
Dissolved Oxygen Test Kit Atlas-scientific Dissolved Oxygen Stamp is a highly compact D.O. monitoring system that fits into any breadboard. This design configuration allows the user to accurately monitor D.O. without having to add any additional circuitry or components to your design. Communication with the D.O.Stamp is done using only eight simple commands. The D.O.-Stamp provides scientific grade readings to any embedded system that has an RS232 connection interface. Features: Dissolved Oxygen Kit comes with necessary components to quickly take accurate readings of dissolved oxygen using your existing micro-controller such as an Arduino or Raspberry Pi. The Dissolved Oxygen circuit returns data in Mg/L up to two significant figures. Readings can be taken either dependent or independently of temperature or conductivity. Dissolved Oxygen Circuit can take readings from any galvanic dissolved oxygen sensor. Dissolved Oxygen Kit, just add the microcontroller of your choice to start taking accurate dissolved oxygen measurements. Data format is ASCII.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $279.60 62% OFF
Manufacturer: Blue Sea Systems
Brand: Blue Sea Systems
Model: 8403
Manufacturer: Blue Sea Systems
Brand: Blue Sea Systems
Model: 8403
All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $286.47 8% OFF
Manufacturer: Milwaukee Instruments
Brand: Milwaukee
Manufacturer: Milwaukee Instruments
Brand: Milwaukee
|
The Milwaukee Mi806 portable meter displays pH with temperature or electrical conductivity (EC) and total dissolved solids (TDS) with temperature on a large, easy-to-read display for water treatment and other general applications. The stability indicator prompts the user when the reading is stable. The auto-hold function can be set to freeze readings automatically for later viewing. TDS factors can be selected from 0.45 to 1.00, as well as a range of temperature coefficients from 0.0 to 2.4% for increased consistency and reproducibility of readings. Temperature can be set to display in centigrade or Fahrenheit. The meter offers automatic one-point or two-point pH calibration, with automatic buffer recognition. EC has automatic one-point calibration. The meter automatically shuts off after eight minutes of inactivity.Accessories included with the Mi806 portable meter are the MA851D/1 pH/EC/TDS/temperature amplified probe with 1m/3.3ft. cable and DIN (Deutsches Institut für Normung) connector, two pH calibration solution sachets, two 1413 μS/cm calibration solution sachets, two electrode cleaning solutions, and a hard carrying case.SpecificationspH range0.00 to 14.00 pHpH accuracy+ or – 0.01 pHConductivity range0 to 20.00mS/cmConductivity accuracy+ or – 2% full scaleTDS range+ or – 20.00pptTDS accuracy+ or – 2% full scaleTemperature range0 to 60 degrees C (32 to 140 degrees F)Temperature accuracy+ or – 0.5 degree C (+ or – 1 degree F)Power source(1) 9V alkaline battery (included)Weight260g/9.17 ounces (with battery)Dimensions200 x 85 x 50mm/7.8 x 3.3 x 2 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.A multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts o...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $309.99 1% OFF
Manufacturer: Atago
Brand: PAL-1
Manufacturer: Atago
Brand: PAL-1
|
THIS UNIT IS THE MOST POPULAR DIGITAL BRIX REFRACTOMETER IN THE WORLD! A MUST HAVE ITEM IF YOU ARE A FARMER, PRODUCE BUYER OR CONNECTED WITH AGRICULTURAL PRODUCTS IN SOME WAY. YOUR INDUSTRY USES THIS UNIT AND YOU SHOULD TOO!
THE ATC RANGE HAS BEEN UPGRADED AND THE PAL-1 CAN NOW HANDLE SUPER HOT SAMPLES - UP TO 100'C/212'F!
This unit is especially handy for testing items like fruits, vegetables, grasses, plants, trees, etc, for there sugar content, as well as Raw Maple Sap, Soda Fountains, Barbeque Sauces, Ketchups, Metwlworking Coolant (Soluble Oil, Semi-Synthetic and Synthetic), Lobster Bloodand more.
Calibrate with Water (water = 0% Brix) and wipe clean with a cotton towel, and you're ready to go!
You have highly accurate results in seconds!
This is a very powerful and simple to use unit that has the unsurpassed quality of Atago!
This is the Refractometer of Professionals!
Benefits:
* The PAL-1 is equipped with "Automatic Temperature Compensation"(ATC) for accurate measurements without recalibration after shifts in ambient working temperature (field use). The "ATC" range is 10'C-100'C (50'F-212'F). This range allows you to sample HOT Samples!
* The speedy performance of the PAL is amazing. Simply put a drop of a sample on the prism surface and press the START key. The Brix value (sugar content / concentration) will be displayed in just 3 seconds.
* Protection class of the PAL is IP65. You can rinse off the sample by running water on the sample stage. The design allows the user to easily wipe off the sample.
* The sample stage is designed to keep sample solutions from spilling out.
* The unit runs off (2) AAA batteries on a LARGE PRINTdigital LCD display.
PAL-1 Specs:
* Scale Range: 0%-53% Brix, Temperature 9.0 to 99.9°C
* Resolution: 0.1% Brix, Temperature 0.1°C
* Accuracy: +/- 0.2%, Temperature ±1°C
* Dimensions: 55mm x 31mm x 109mm
* Weight: 100 grams/4 ounces
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $312.97 1% OFF
Manufacturer: ATAGO U.S.A.,Inc.
Brand: Atago
Model: 2313
Manufacturer: ATAGO U.S.A.,Inc.
Brand: Atago
Model: 2313
|
The Atago 2313 MASTER-M is a hand-held, portable, water-resistant refractometer with a Brix scale that measures in the 0.0 to 33.0% range, has a spoon-shaped tip for automatic smooth sampling (ASD), manual temperature compensation, and a ridged outer shell. A Brix refractometer measures the refractive index of a solution in a sample, converts it to sugar concentration in units of percent by weight (% Brix, also known as degrees Brix), and displays the results. Hand-held refractometers, also known as sugar meters, concentration meters, or Brix meters, are commonly used in the culinary, food and beverage, pharmaceutical, educational, geological, chemical, and ecological industries, and for water-testing applications. This refractometer is housed in a durable, die-cast aluminum metal body for heat and organic solvent resistance. The 2313 MASTER-M features manual temperature compensation. The unit can be calibrated with water. Calibration can be controlled and adjusted with an exposed calibration screw and an included specialized screwdriver, although other items can be used to unscrew the unit. However, the unit retains its water-resistance. A spoon-shaped tip allows for automatic sample distribution (ASD) across the prism and boundary line (also called measurement line) for accurate, smooth sampling with small portions, and sample disposal from the edge. With ASD, the daylight plate does not need to be lifted to cover the prism with the sample. The outer shell grip is smooth and easy to clean, which reduces the possibility of food and sample entrapment, avoiding contamination and bacterial growth. The analog Brix scale features a bright, high-contrast display for clear visibility of the boundary and memory lines intersection. Samples are viewed through a monocular, focusable, cushioned eyepiece. The unit includes a protective plastic storage case with a foam cut-out insert to cushion the instrument. Specifications Measurement scale range Brix 0.0 to 33.0 percent (ATC) Minimum detection scale Br...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $317.09
Manufacturer: PRM
Brand: PRM
Model: WM200PVX
Manufacturer: PRM
Brand: PRM
Model: WM200PVX
PRM multi-jet water meters are known for their wide range, simplicity, and accuracy in low quality water. Features: Pulse Output Components, Silicone Rubber Seals, Sealed Dry Dial for Clear Readings, Internal Strainer to Protect Meter from Particulate Damage, Magnetic Drive for lower resistance. Specifications: Class:B, Accuracy: Transitional Flow: ± 5% Nominal Flow: ± 2%. Maximum Water Temperature: 104°F. Maximum Water Pressure: 232 psi. Mounting Orientation: Horizontal. Materials: Body: Brass, polyethylene, Couplings: Brass, Measuring Chamber: Polyethylene, Paint: Epoxy Coated, Seal: Black: Silicone Rubber, White: HDPE; Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $320.00 1% OFF
Manufacturer: Racine Federated
Brand: Hedland
Model: H701A-030
Manufacturer: Racine Federated
Brand: Hedland
Model: H701A-030
Flow Meter For Petroleum Fluids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 0.876 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. COMMON PARTS are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: SAE 1070/1090 Carbon Steel, Retaining Spring: SAE 1070/1090 Carbon Steel, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.
|
|