Water Quality & Instrumentation - Page 455

Manufacturer: Cannon Instrument Brand: CANNON Instrument

For measurement of kinematic viscosity of transparent Newtonian liquids by suspended level principle as described in ASTM D 445 and D 446, and ISO 3104 and 3105. Similar to Cannon-Ubbelohde but less rugged n design. Provided with certificate of calibration and instruction sheet

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingSwivel brass fitting. Brand Name|Hedland#MFR Part Number|H625-710/H526-008-NO#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H625#Connection Size|3/4 Inch#Flow Rate|1 - 10 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|8-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 0.876 Specific Gravity Oil Media

Manufacturer: Cole-Parmer Brand: Cole-Parmer Model: AO-32461-26

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters’ Inlet/Outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (sold separately) which allows for mobility from Bench to Bench. Note: there are many additional types of acrylic flowmeters not listed here. Contact our application specialists for quotes on acrylic meters with special requirements. Meter with Valve provides flow control through a highly durable meter body ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment.. integrated precision Valve allows precise manual flow across the full scale.. the flexible design allows for panel or Bench mounting.

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingSwivel brass fitting. Brand Name|Hedland#MFR Part Number|H624-710/H526-008#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H624#Connection Size|1/2 Inch#Flow Rate|1 - 10 gpm#Pressure Rating|325 psi#Connection Type|NPTF Female#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|7-3/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 0.876 Specific Gravity Oil Media

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Accurately measure flow rates of air, water, and other commonly used gases with the Series VA Variable Area Glass Flowmeters. Flowmeters are designed with an easy-to-read universal mm scale and supplied with a correlation chart containing calibration data for air and water. Correlation data for other gases and liquids are available. Permanently fused ceramic scale with vertical locator line reduces parallax and eye fatigue. Thick polycarbonate front shield protects tube from breakage and also serves as a magnifying lens to enhance reading resolution. Glass flowmeters are suitable for metering carrier gases, liquid and gas measurement in pilot plants, laboratories, process flow and level indicating. Units are equipped with a standard 6-turn needle valve for flow rate control. High precision metering valves with non-rising stems (sold separately) are available for high sensitivity control and resolution - particularly suited for very low flow rates. Flowmeters are shipped completely assembled and ready for panel mounting. Use an optional acrylic tripod base to convert to self-standing bench mounting. (Standard range shown in picture).

Manufacturer: PIUSI USA Brand: PIUSI Model: F00472A10

K600/3 PULSER 1in GAS DIESEL METERFluid Electronic Meter 2.64-26.4 gpm. Accuracy +/- .5%. Fluids: Diesel, Light oil. Pulsar 133 p.gal, Viscosity 10-2000 cST, Max working pressure 994 psi. IN/OUT connection 3/4" NPT. Weight 3.7lbs.

Manufacturer: YSI Brand: YSI

Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivity meters are used in research laboratories and a variety of industries, such as water-quality testing, waste-water treatment, hydroponics, agriculture, aquaculture, and cosmetics manufacturing.YSI manufactures instruments, sensors, and software for environmental water quality monitoring and testing. The company, founded in 1948, is headquartered in Yellow Springs, OH.

Manufacturer: Signet Brand: Signet

Meter, Flow Kgf

Manufacturer: Milwaukee Brand: Milwaukee Model: MA 888

The MA888 is an optical instrument that employs the measurement of the refractive index to determine the % volume and freezing point of ethylene glycol based coolants or antifreeze. The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for use in the field to optimize your cooling system. The MA888 refractometer is an optical device that is simple and quick to use. Samples are measured after a simple user calibration with distilled or deionized water. Within seconds, the refractive index and temperature are measured and converted into one of two measurement units; % Volume or Freezing Point. The instrument utilizes internationally recognized references for unit conversion and temperature compensation for ethylene glycol solutions (e.g. CRC Handbook of Chemistry and Physics, 87th Edition). The temperature (in °C or °F) is also displayed on the large dual level display along with helpful message codes.

Manufacturer: Varsal, Inc. Brand: Varsal Model: 450-39-Q50

Varsal manufactures UV-VIS-NIR spectrophotometer cells and cuvettes, including micro-cells. Our unique fire-fused production technology assures long lasting, easy to clean, high performance cells. Varsal cells can be used with all commonly used spectrophotometers to measure absorbance or transmission and they comply with all international standards. Depending on the spectral range to be analyzed, Varsal spectrophotometer cells are available in optical glass, quartz and IR quartz glass. Our technical ability to produce cells that meet the demanding specifications of instrument manufacturers is only surpassed by Varsal's customer service and on-time delivery. Wavelength zone: 160/400 newton meters. Percentage transmission: >80%@240 newton meters. Matching tolerance: within 0.3%@240 newton meters