Water Quality & Instrumentation - Page 507

Manufacturer: DAVIS INSTRUMENTS Brand: Brooks Instrument Model: AO-32470-57

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters' Inlet/Outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (32462-50 sold separately) which allows for mobility from Bench to Bench. Note: there are many additional types of acrylic flowmeters not listed here. Contact our application special its for quotes on acrylic meters with special requirements. Durable single-piece body withstands severe shock and vibration ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment flexible design allows for panel or Bench mounting.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

For measurement of kinematic viscosity of transparent Newtonian liquids by suspended level principle as described in ASTM D 445 and D 446, and ISO 3104 and 3105. Similar to Cannon-Ubbelohde but less rugged n design. Provided with certificate of calibration and instruction sheet

Manufacturer: Dynalon Brand: Dynalon Model: 227145

Flow Indicator, Paddlewheel. This polystyrene, bright red paddlewheel indicates liquid or gas flow from 5 ml/sec to 95 ml/sec. The clear outer case allows for unobstructed view of the wheel which spins freely with flow. Not for use with corrosive fluids or temperature over 122° F (50° C). Can be used to connect tubing I.D. of 3/8" to 9/16" (10-14 mm) I.D.

Manufacturer: Oakton Meters Brand: Oakton Meters

Great for water, laboratory or plant use, this multi Testr features single-junction pH electrodes for longer life and wider range of sample compatibility. Pin-style conductivity sensors feature stainless steel electrodes for chemical resistance and durability. Replaceable sensor module saves you money by reusing the meter body. Advanced features include auto-shutoff, user-adjustable temperature coefficient, self-adjusting TDS, and low-battery indicator.One pocket sized meter for pH, TDS and temperature! Up to 5 point pH calibration with NIST or USA auto buffer recognition.

Manufacturer: Thomas Scientific Brand: Varsal Model: 406-318B-I10

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/IP/RF-1 U-tube reversed-flow viscometer has a 0.6 to 3.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.003 centistokes per second (cSt/s) for calculating kinematic viscosity. The BS/IP/RF-series size 1 viscometer uses a 280mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This U-tube reversed flow viscometer meets the ASTM International D446 standard for reversed-flow viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet indus...

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingSwivel brass fitting. Brand Name|Hedland#MFR Part Number|H625-707/H526-008#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H625#Connection Size|3/4 Inch#Flow Rate|1 - 7 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|8-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 0.876 Specific Gravity Oil Media

Manufacturer: GPI Brand: GPI® The Proven Choice® Model: 111200-20

The GPI model 111200-20 is a FM-200-G6N, FM-200 Series Mechanical Fuel Meter. This Mechanical Fuel Meter comes with a strainer of gallons with 3/4" NPT Inlet/Outlet connections. It is UL Listed. Its flow range is 4 to 20 GPM, and its Pressure Rating is 50 PSI. It has an Aluminum housing, and its display is mechanical, Batch: 4, Total: 5 Digits. To use with diesel fuel (biodiesel blends B20), Gasoline (alcohol blends E15), and Kerosene. Do not use with water or chemicals.

Manufacturer: Sensorex Brand: Sensorex Model: DO1200/T

The DO1200 and DO1200TC feature dependable galvanic technology. No warm up period is required. Sensors are supplied with fast responding HDPE membrane caps for portable or lab use. Optional PTFE membrane caps are available for on-line or heavy UV exposure applications. Fill solution is replaceable when required. The DO1200 is supplied without internal temperature compensation. The DO1200TC can be supplied with a variety of user defined ATC elements. Standard cable length is 2.5 feet with a tinned lead termination. Longer cable lengths and connectors are available for an additional charge. For on-line use, our FC75P 3/4 inch in-line fitting may be ordered to provide for mounting into 3/4 inch FNPT threaded tees.

Manufacturer: Cole-Parmer Brand: Cole-Parmer Model: AO-83301-17

Transmission over 80 percent at 200 nm standard-size cuvettes are the Type most often used for routine laboratory testing. Cuvettes include chemical resistant, PTFE covers. Cuvettes have two clear sides.