Water Quality & Instrumentation - Page 511

Manufacturer: HACH Brand: Hach Company Model: LZW5049.97.0002

SensION+ 5049 is a multi-parameter electrode for determination of pH, conductivity, DO and temperature. The 5049 has a plastic body, and 3 parameter-specific, separately attached electrodes. The probe has a fixed 1 meter cable and MP8 connector dedicated for use with Hach sensION+ MM156 portable meters. It is ideal for pH, conductivity, and DO measurements in general aqueous applications.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 214

The BYK-Gardner 214 ISO flow cup has a 25 to 130 centistokes (cSt) viscosity range and is suitable for testing fluids such as paints and lacquers. The aluminum flow cup has a stainless steel orifice with a 4mm diameter. Efflux times range from 25 to 100 seconds. It includes an International Organization for Standardization (ISO) 2431 certificate. This flow cup is calibrated against Physikalisch-Technische Bundesanstalt (PTB) for testing standard oils and meets ASTM International D5125 standard for testing viscosity of paints and other coatings. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technology (NIST), International ...

Manufacturer: Hygiena Brand: Hygiena

AquaSnap Total measures both free ATP in solution and microbial ATP. The device contains a detergent to release ATP that is bound to microbial or organic matter and inside microbes. AquaSnap is easy to use, economical, and gives real time results. The specifically designed dipper tip collects 100 µl of water ensuring consistent sample collection.

Manufacturer: METTLER-TOLEDO INC. Brand: Mettler Toledo Model: 51340293

Membrane Kit for InLab 605 Dissolved Oxygen Sensors.

Manufacturer: K&L Electronic Brand: K&L Electronic Model: TUF-2000M-TM-1

Features Description High accuracy Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1% Wide measuring range Several types transducer for selection, pipe size from DN50mm to DN700mm Far transmission distance Connecting module and secondary meter through RS-485 interface, transmission distance up to 1000m Powerful Functions Current output: 4-20mA, one channel, can be used for flow/heat transmitter; OCT output: two channels, can be used for flow /heat switch; Current input: 4-20mA, three channels, can be used for data collector; Tri-wire resistance signal input (PT100): two channels, can be used for calorimeter. Wide Application Its unique features, particularly low cost, small size, high performance, local display, make it the ideal choice for industrial automation, processing control, flow meter networking, composing multi-channel, high accuracy flow meter. Power Supply:DC8-36V Input:3 channel 4-20mA analog input Output:Isolation RS-485 output, 2 channel isolation OCT output:1 channel isolation 4-20mA output (two-wire system) Communication Protocols:Compatible with METER-BUS,MODBUS,Fuji extended protocol and general water meter protocol Clamp On Transducer Introduction: 1. TS-2 type: DN15-100mm，-30-90℃ 2. TM-1 type: DN50-700mm，-30-90℃ 3. TL-1 type: DN300-6000mm，-30-90℃ 4. HTS-2 type: DN15-100mm，-30-160℃ 5. HTM-1 type: DN50-700mm，-30-160℃ 6. HTL-1 type: DN300-6000mm，-30-160℃ Insertion Type Transducer Introduction: 1. TC-1: DN＞80mm -30~160℃ 2. TC-2：DN＞80mm -30~160℃ (Lengthen Type) Accessories: Transmitter;TM-1 transducers;Clamp Fixture;Cable:English manual

Manufacturer: Thomas Scientific Brand: WTW Model: 2F0001

The WTW MultiLine IDS series of meters are the first of their kind, redefining the way electrochemical measurements are conducted. The innovative, digital technology of the MultiLine IDS series eliminates the need for dedicated meters for specific parameter measurements; now, measuring is simply a function of the sensor attached to the instrument, making the MultiLine series WTW’s most intelligent and flexible products available today.

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Tubing kit for UV-VIS OQ/PV Test 8453 UV - AA

Manufacturer: Hanna Instruments Brand: Hanna Instruments

Set-up is simple. Install the HI 981504 near the sample to be tested, plug the indicator in and immerse the probes. pH, TDS and temperature measurements will be simultaneously displayed on three backlit LCDs. Users can easily select the temperature unit ( degree C or degree F) on the back panel. The HI 1286 gel-filled pH electrode is provided with a waterproof sleeve to protect the BNC connector. The unique design of the electrode provides longer life in aggressive solutions. The HI 7634 TDS probe is easy to clean and requires little maintenance. Measurements are accurate and the meter can be calibrated at one or two points for pH and at a single point for TDS. Temperature is factory calibrated. Range: pH: 0.0 to 14.0; TDS: 0 to 1990 ppm; temperature: -10.0 to 60.0 degree C or -14.0 to 140.0 degree F. Resolution: pH: 0.1; TDS: 10 ppm; temperature: 0.1 degree C or 0.1 degree F. Accuracy: pH: +/-0.2; TDS: +/-2 percent F.S.; temperature: +/-0.3 degree C or +/-0.5 degree F. pH calibration: manual two points through trimmers. TDS calibration: manual one point through trimmer. TDS factor: 0.5. Probes: pH: HI 1286 PEI body pH electrode with 2 m (6.6') cable (included); TDS: HI 7634 TDS probe (fixed); temperature: stainless steel with 2 m cable (fixed). Temperature compensation: automatic, 5 to 50 degree C (41 to 122 degree F), for TDS readings only. Power supply: 12 VDC adapter (included). Environment: 0 to 50 degree C (32 to 122 degree F); 95 percent RH. Measures 4-19/64" length by 1-25/64" width by 6-19/64" height.

Manufacturer: Green IQ Brand: Green IQ

Bundle sale for Green IQ smart irrigation computer + 1" flow meter US Model (GIQ-US80-00, NPT thread) GreenIQ 1" Flow Meter allows your Smart Garden Hub to: 1. Get usage and saving reports in Liters or Gallons. 2. Get alerts on leaks, pipe breaks and insufficient water flow.

Manufacturer: Markes International Brand: Markes International Model: C1-CXXX-5312

SulfiCarb (C3 - C8), Inert Coated Stainless Steel 3.5" x 1/4" Thermal Desorption Tubes, pack of 10.