Water Quality & Instrumentation - Page 547

Manufacturer: Thermco Brand: THERMCO

THERMCO ASTM/API COMBINED W/SPIRIT FILLED THERMOMETER IN BODY HYDROMETERS - 0/150F - 380mm ASTM 53HL -TRMC

Manufacturer: Vee Gee Brand: VeeGee Model: BTX-1

A solid 0-32% Brix Refractometer with Automatic Temperature Compensation. Buy from Magnum Media and get a 3 year warranty again defects!

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7--13 business days to arrive to your hand. Product description ITO conductive film is a high-technology product obtained by the method of magnetron sputtering, transparent organic thin film on the transparent indium tin oxide (ITO) conductive thin film coating by annealing treatment. The thickness of the ITO film is different, the conductivity and transmittance of the film are also different. In general, under the same process conditions and with the same performance of the PET substrate material,the thicker the ITO film is, the smaller the surface resistance of PET-ITO film, light transmission rate is correspondingly smaller. Technical Datas  Sheet Resistance:10Ω Transmittance:≧80% Haze:

Manufacturer: COLE-PARMER Brand: Oakton

science-lab-conductivity-meters

Manufacturer: Cole-Parmer Brand: Cannon Model: 9721-B74

Cannon-fenske routine viscometer. Quickly and easily measure the viscosities of transparent Newtonian liquids in the chemical and petroleum industries. Require a 7-ml sample volume.

Manufacturer: Test Products International, Inc Brand: TPI Model: 390

Use for salt measurement, temperature measurement and TDS. 0.001 to 5.0 percent measurement range for salt, 32 to 212 degree F measurement range for Temperature and 0 to 999ppm measurement range for TDS. 0.01 to 0.1 percent resolution at 20 degree C for salt and 1ppm for TDS. Aqueous solution measurement target. Measures 10" length by 1-1/4" width by 21/32" height. RoHS compliant.

Manufacturer: Kisco Sales Brand: Kisco Sales Model: K-8032

The Kisco Flow Meters are made of impact resistant machined acrylic plastic with threaded, O-Ring sealed inlet and outlet polypropylene adapters. Type 316 Stainless Steel guide reduces float oscillation and improves overall meter operation. Meters are mounted on a 7" x 8" stainless steel plate with flow rate scales indicating gallons per hour for materials weighing 9, 10, 11 and 12 lbs per gallon. Conversion factors are also provided in the reverse side of the plate for solutions of different weights or to convert U.S. Gallons to Liters or Imperial Gallons. Field tested and proven, these flow meters are acceptible, They may be used at temperatues Up to 125 Deg F and operating pressure of 150 PSI

Manufacturer: Datalogic Brand: Datalogic Model: W-M8500XTSW/S-3

3yr 2day mgl 8500xts w/scale eofc comp

Manufacturer: Cannon Instrument Brand: CANNON Instrument

Reverse-flow type, for measurement of kinematic viscosity of dark Newtonian liquids according to ASTM D 445 and ISO 3104. Permit measurements of liquids whose meniscus cannot be seen at the timing marks when using Cannon-Fenske Routine-type viscometer. Used to measure kinematic viscosity of liquid (cutback) asphalts and road oils at 60°C (140°F) in range of 30 to 6000 centistokes according to ASTM D 2170. Also used to study lubricating oils at low temperatures when investigating the effect of various additives on lubricating and hydraulic oils. External pressure can be applied to vary shear stress and shear rate. cifications conform to ASTM D 446 and ISO 3105.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35606-57

The Oakton WD-35606-57 Ultem Conductivity/TDS Cell is an electrode, or probe, that measures the electrical conductivity (EC) and Total Dissolved Solids (TDS) of a solution. The probe features a built-in sensor for ATC. It has Ultem-PEI body housing and stainless steel rings for chemical resistance. The probe has a BNC connector, with snap-lock architecture, to provide tight coaxial cable connection and stability. The electrode provides fast temperature response and air entrapment reduction, for more accurate, stable readings. It has a cell constant (K) =10.0, which is suitable for high conductivity measurements. The probe features a 10-foot cable, three-band platinum sensor, and probe style C and is for use in a temperature range of 0 to 80 degrees C. The electrode has a removable, plastic probe guard and is intended for use with the Oakton CON 6, TDS 6, and SALT 6 (sold separately). Conductivity probes are used for measuring the electro-conductivity of a solution. TDS measurement indicates materials such as salts, bases or minerals, which contribute to electrical conductivity within a solution. These measurements are commonly used in hydroponics, aquaculture, agriculture, and to measure the amount of salts or other compounds present in water. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China. What’s in the Box? One conductivity/TDS electrode One 10-foot cable Removable, plastic probe guard Instructions