Water Quality & Instrumentation - Page 554

Manufacturer: COLE-PARMER Brand: Cole-Parmer

These easy-view correlated flowmeters feature a wide viewing angle. The wide viewing angle lets you view flow tube and float from either front or side! Use rotating shield to magnify tube for precise readings. Ideal for measuring and regulating flow rates for analytical instruments or industrial chemical processes. Common applications include blending, mixing, and gas purging. Flowmeters are available with single- or dual-floats and include a valve to control flow. Choose new dual-float models for higher flow rates than the single-float models. Meters are available with aluminum or 316 stainless steel (SS) frames, valves, and fittings and all models feature a borosilicate glass tube and Buna-N O-rings (Stainless steel flowmeters have Viton O-rings). All meters include correlation charts for water and air. Correlation charts for oxygen, nitrogen, hydrogen, carbon dioxide, and helium are available from our Application Specialists upon request. Inlet and outlet ports are located on the back of the flowmeter to keep tubing out of the way (tubing is sold separately). Mount flowmeters vertically on a control panel or bench with tripod base (order separately). Easy to install and easy to read with 180° viewing New models with dual-floats allow a higher turndown ratio-better than 20:1

Manufacturer: LaMotte Brand: LaMotte Model: 2000-BP

Battery pack consists of a rechargeable Ni-metal hydride battery. Use with Battery Charger supplied with SMART Spectro. Battery will automatically charge. Full charge requires about 5 hours. For use with the SMART Spectro only.

Manufacturer: Thermo Scientific Brand: UV-Vis

Features an extensive selection of easy-to-install Excitation and Emission Filters that allows the user to configure the unit to meet application needs. Menu-driven software guides the operator through quantitative analysis, and automatic gain adjustment eliminates time consuming manual adjustment. Sample concentrations are calculated based upon linear regression analysis of standard curve data. Software includes a Filter Selection Help Guide and a Diagnostics menu for operation status checks. RS 232 serial interface included for data output to printer or computer. Large, versatile sample compartment accommodates a wide variety of cells or cuvettes. Ergonomic design facilitates quantitative analysis of multiple samples.

Manufacturer: Cole-Parmer Brand: Cole-Parmer Model: AO-83055-35

Four-position 10 mm cuvette holder for Cole-Parmer Visible Spectrophotometer, model 83055-30.Manufactured by Cole-Parmer. Number Of Items: 1.

Manufacturer: GPI Brand: GPI® The Proven Choice® Model: 111200-18

The GPI model 111200-18 is a FM-100-G6N, FM-100 Series Mechanical Fuel Meter. This Mechanical Fuel Meter comes with a filter for gallons with ¾ in. NPT inlet/outlet. Its approval is UL Listed. Its flow rate is 4 to 20 GPM and its pressure rating is 50 PSI/3.4 bar. Its mechanical connection is 3/4 in. Inlet and 3/4 in. Outlet. Its display is mechanical, Batch: 4, Total: 5 Digits. It has an Aluminum Housing, and is to be used with diesel fuel (biodiesel blends B20), Gasoline (alcohol blends E15), Kerosene. Do not use with water or chemicals. Its unique features is that it has a built-in filter that protects the equipment being fueled.

Manufacturer: Cole-Parmer Brand: Cole-Parmer Model: AO-83200-70

Cuvettes come in matched pairs in standard, semimicro, or Micro size, and can be ordered with either a cover of PTFE resin or a stopper of PTFE resin. All cuvettes have a 10-mm pathlength. All pairs are accurately matched to give the same value for the same solution within 1 percent tolerance. Glass cuvettes have a guaranteed 82 percent transmission at 320 nm. Glass cuvettes come with a guaranteed 82 percent transmission at 320 nm with a tolerance within +/- 1 percent 3.5 ml capacity . 10 mm pathlength.

Manufacturer: ValueStore.us Brand: ValueStore.us Model: TUF-2000M-TS-2

This Kit includes: (1x) Main unit (Flow meter). (1x) Pair of small tranduscers TS-2 for pipe size from 0.78 to 3.9 inch (20 to 100 mm) (1x) 20 ft. Cable / 6 mt. Cable. (2x) Clamp fixture for transducers. Main Features: 1. High Accuracy measuring: Linearity: better than 0.5%,Repeatability: better than 0.2%, Accuracy: better than ±1%. 2. Wide measuring range: Several types transducer for selection, measuring pipe size from DN15mm to DN6000mm. 3. English menu: This version of TUF-2000M supports English, easy to operate. 4. High Reliability: Adopt low voltage, multi-pulse technology to improve accuracy, useful life and reliability. 5. Strong Anti-interference: Dual-balance signal differential receiver/driver circuit to avoid interference of converter,TV tower, high voltage line etc. 6. Powerful Recording Function. Automatically record the following data: a. The totalizer data of the last 512 days/128 months/10 years.b. The time and corresponding flow meter of the last 64 times of power on and off events.c. The working status of the last 32 days. 7. Power Supply:DC8-36V. 8. Input:3 channel 4-20mA analog input. 9. Output:Isolation RS-485 output, 2 channel isolation OCT output:1 channel isolation 4-20mA output (two-wire system). 10. Communication Protocols:Compatible with METER-BUS, MODBUS, Fuji extended protocol and general water meter protocol. Clamp On Transducer Introduction: 1. TS-2 type: DN15-100mm，-30-90℃ 2. TM-1 type: DN50-700mm，-30-90℃ 3. TL-1 type: DN300-6000mm，-30-90℃ 4. HTS-2 type: DN15-100mm，-40-160℃ 5. HTM-1 type: DN50-700mm，-40-160℃ 6. HTL-1 type: DN300-6000mm，-40-160℃ Insertion Type Transducer Introduction:1. TC-1: DN＞80mm -40~160℃ 2. TC-2：DN＞80mm -40~160℃ (Lengthen Type).

Manufacturer: Thermo Scientific Brand: Thermo Scientific Orion Model: AQ006C

Thermo Scientific Orion AquaMate Cell Holders are for use with the AquaMate 8000 UV-Vis and AquaMate 7000 Vis spectrophotometers.

Manufacturer: Romack Brand: Romack

Manufacturer: Horiba Instruments Brand: HORIBA Model: 30003471

The HORIBA LAQUA F-70 series marries advanced technology with stylish design and an easy-to-use touch screen interface. The LAQUA series was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. LAQUA series includes single or dual channel meters that can measure the most commonly used parameters in electrochemistry such as pH, ORP, Ion, Conductivity, Resistivity, Salinity, TDS and Temperature and up to six parameters simultaneously