Water Quality & Instrumentation - Page 649

Manufacturer: UNICO Brand: Unico

UNICO 4-Position Manual Cell Holder for S-2150 Series Spectrophotometer S-2150-111

Manufacturer: Varian Brand: Varian

Varian Multipin Electrical Feedthrough

Manufacturer: ASTA Brand: Hudson Surface Tech Model: PFS2409000 Color: Silver

μFocus targets give you a precisely formed dried droplet spot of predetermined size. You can work with larger (1700-2000 μm) spots and use standard spotting techniques. You can also work with much smaller spots (700-900 μm) that allow you to reduce the amount of matrix used, to maintain optimum matrix to analyte ratio with less concentrated or smaller analyte samples. Many users report 5-10x increases in sensitivity. Because μFocus spots are uniform, you also see improvements in spot-to-spot reproducibility, making quantitative analysis and fingerprint assays more reliable.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

These easy-view correlated flowmeters feature a wide viewing angle. The wide viewing angle lets you view flow tube and float from either front or side! Use rotating shield to magnify tube for precise readings. Ideal for measuring and regulating flow rates for analytical instruments or industrial chemical processes. Common applications include blending, mixing, and gas purging. Flowmeters are available with single- or dual-floats and include a valve to control flow. Choose new dual-float models for higher flow rates than the single-float models. Meters are available with aluminum or 316 stainless steel (SS) frames, valves, and fittings and all models feature a borosilicate glass tube and Buna-N O-rings (Stainless steel flowmeters have Viton O-rings). All meters include correlation charts for water and air. Correlation charts for oxygen, nitrogen, hydrogen, carbon dioxide, and helium are available from our Application Specialists upon request. Inlet and outlet ports are located on the back of the flowmeter to keep tubing out of the way (tubing is sold separately). Mount flowmeters vertically on a control panel or bench with tripod base (order separately). Easy to install and easy to read with 180° viewing New models with dual-floats allow a higher turndown ratio-better than 20:1

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Calibrate kinematic and Saybolt viscosity equipment, both automatic and manual. Standards are NIST-traceable and certified to ASTM D2162 under ISO/IEC 17025 guidelines. The table below shows the approximate values for kinematic and Saybolt viscosity. Standards are supplied in 500-mL bottles and include full certification and a Material Data Safety Sheet. Calibrated to a precision of ±0.2% of viscosity

Manufacturer: Flomec Flow Meters Brand: Flomec Flow Meters

Flomec 01N series 3 - 30 gpm turbine def flow meter made from nylon rated to 150 psig pressure with 1" (F)NPT connection. Brand Name|Flomec#MFR Part Number|113255-24#UPC|031401001235#UNSPSC|41112501#Item|DEF Flow Meter#Connection Size|1 Inch#Flow Rate|3 - 30 gpm#Pressure Rating|150 psig#Connection Type|(F)NPT#Display Type|4-Digit LCD#Maximum Viscosity|5 cP#Sensor Type|Magnetic#Strainer Type|55 mesh#Power Source|(2) AAA Battery#Temperature Rating|14 - 131 deg F#Material|Nylon#Standard/Approvals|CE Certified

Manufacturer: Thermo Scientific Brand: UV-Vis

Features an extensive selection of easy-to-install Excitation and Emission Filters that allows the user to configure the unit to meet application needs. Menu-driven software guides the operator through quantitative analysis, and automatic gain adjustment eliminates time consuming manual adjustment. Sample concentrations are calculated based upon linear regression analysis of standard curve data. Software includes a Filter Selection Help Guide and a Diagnostics menu for operation status checks. RS 232 serial interface included for data output to printer or computer. Large, versatile sample compartment accommodates a wide variety of cells or cuvettes. Ergonomic design facilitates quantitative analysis of multiple samples.

Manufacturer: Racine Federated Brand: Hedland Model: H671A-050

Flow Meter For Air and Other Compressed Gases. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 1.0 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. Common parts are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: T316 SS, Retaining Spring: T316 SS, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.

Manufacturer: Great Plains Industries Brand: GPI® The Proven Choice® Model: 01N31LM

The GPI 01N31LM digital turbine water flowmeter is made from durable nylon and features an LCD display that is accurate to +/-5 percent of reading. This economical turbine meter is designed for flow rates from 10 to 100 LPM (3 to 30 GPM) and is factory calibrated in gallons for use with water. The lightweight 01N31LM mounts easily to the end of a hose and is ideal for use with free flow gravity systems or combined with an electric transfer pump as part of an irrigation or water management system. The GPI 01N31LM digital flow meter has 1-inch FNPT inlet/outlet and comes with two standard AAA batteries.

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, DC Volts, LED, W96xH48mm, 4-Digit, 0-500V Input, 3 NPN Outputs + BCD Output, 100-240 VAC