Water Quality & Instrumentation - Page 690

Manufacturer: Metrex Brand: Metrex

A convenient, ready-to-use, intermediate-level disinfectant. Kills TB in 3 minutes and HBV, HCV, and HIV in 2 minutes. For use on nonporous surfaces. Nontoxic and nonirritating. 1 Case is 4 Gallons

Manufacturer: HACH Brand: Hach Company

Lamp Assy 2100P

Manufacturer: Blue-White Brand: Blue-White

F-300 series flow meters utilize a pitot tube pick up and a hard edged float design to provide a convenient and economic means of measuring water flow in a closed pipe system. The F-300 impact tube flow meter features a tough, one-piece machined acrylic meter body, corrosion resistant internal parts, and permanent screen-printed scale. You get all the strength and long service life required in most commercial and industrial applications. Flowmeters are installed after the filtration system in Commercial Pool applications. This enables the service persons, or Health Inspector to tell at a glance if the recirculating pump is pushing an adequate amount of water to ensure optimum water turnover (filtration).

Manufacturer: GENERAL Brand: General Model: REF211ATC

' Refractometer, Range 0 to 10 Percent (Salinity), 1 to 1.07 s/g (Specific), Resolution Salinity:0.1 PercentSec. Grav.: 0.001 s/g '

Manufacturer: Racine Federated Brand: Hedland Model: H624-010

EZ-View Flow Meters For Water. 1/2 inch ports. EZ to install, in any position. Polysulfone bodies for standard applications. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 – 7MO stainless.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

CANNON certified viscosity standard liquid is useful for calibration and verification procedures, including but not limited to glass capillary, rotational, falling ball, and cup viscometers. Calibration or verification with a certified viscosity standard helps to ensure the reliability of measurements made with any viscometer. This listing is for each.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98128 Color: red

The Hanna Instruments HI 98128 is a compact pH tester used in laboratory and industrial applications, and has Automatic Temperature Compensation (ATC), automatic calibration, a dual-line LCD screen, a replaceable electrode cartridge, and a housing that floats. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The dual-line LCD screen simultaneously shows the current measurement and the current temperature, and a hold function freezes readings for recording. The meter has automatic calibration at one or two points with two sets of standard buffers (pH 4.01/7.01/10.01 or pH 4.01/6.86/9.18). The meter has a water-resistant housing, a tactile grip casing, and floats. A battery error prevention system alerts when battery power is low and displays battery percentage on startup. Four 1.5V AA batteries provide approximately 300 hours of continuous use. The meter switches off after eight minutes of inactivity to save battery life. The meter also comes with a HI 73127 pH electrode, an electrode removal tool, and instructions. Specifications pH range-2.00 to 16.00Temperature range-5.0 to 60.0 degrees C (23.0 to 140.0 degrees F)pH resolution.01Temperature resolution0.1 degrees C (0.1 degrees F)pH accuracy+ or - .05Temperature accuracy+ or – .5 degrees C (1 degree F)Operating temperature-5 to 50 degrees C (23 to 122 degrees F)Operating relative humidity100 percentDimensions163 x 40 x 26mm/6.4 x 1.6 x 1.0 inches (H x W x D)Meter weight100g/3.5oz.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for mea...

Manufacturer: Azzota Brand: Azzota Model: RHG-181

Packing List Hand held refractometer x 1 Carrying case x 1 User Manual x 1

Manufacturer: HM ELECTRONICS Brand: HM Digital Model: HMPH-200

Measures pH and Temperature. Auto-ranging three point calibration with digital fine tuning. Includes 4 pH buffer solution in a sponge embedded in a clear cap. Waterproof housing. Simultaneous temperature display. Measurement Range: 0-14 pH. Digital automatic calibration (one point), with digital fine tuning. Auto-off function, data-hold function and low-battery indicator. Display: large and easy-to-read LCD screen includes simultaneous temperature reading. Calibration:The PH-200 meter is three-point factory calibrated to 4, 7, and 10 pH. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver. Includes a cap, lanyard, and pH 7.0 buffer. pH Range: 0 - 14. Temperature Range: 0-80 °C ; 32-176 °F. Resolution: 0.01 pH; Temperature resolution is 0.1°C /°F. Accuracy: +/- 0.02 pH. Calibration: Digital automatic calibration (one point) with digital fine tuning. Electrode: Replaceable glass sensor and reference tube electrodes. Power source: 2 x 1.5V AAA Alkaline (include batteries) Housing: Waterproof (submersible; floats).

Manufacturer: CHESTERTON Brand: Chesterton

NEW CHESTERTON S50 2-50GPH WATER FLOW METER D537373