|
|
-
3.6 of 5.0 with 46 Reviews
SALE PRICE: $206.36 1% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: BL983320-1
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: BL983320-1
|
This Hanna mini controller has been specially designed for water conditioning and growing applications. Compact in size, it can be mounted in confined spaces or even right next to the vat or barrel containing the chemicals. This meter permits automatic control of installations previously checked manually. EC measurements are shown on the display and the multicolored LED continuously indicates if the mini controller is in measurement, dosing or alarm mode.BL 983320 measures from 0.0 to 199.9 microsecond per centimeter. Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need. The overtime control system advices users when the relay is active for too long, helping to prevent over dosage. This model is supplied with mounting brackets, transparent cover and instruction manual. Resolution: 0.01 microsecond per centimeter. Calibration: manual with CAL trimmer. Temperature compensation: Automatic, 5 to 50 degree C (41 - 122 degree F) with Beta=2 percent/degree C. 115/230V Power supply. Dosing relay: maximum 2A (fuse protected), 250VAC, 30Vdc. Overtime: adjustable, typically from 5 to approx. 30 minutes. Measures 3-3/32" length by 1-57/64" width by 3-11/16" height.
-
3.6 of 5.0 with 24 Reviews
SALE PRICE: $206.73 1% OFF
Brand: Milwaukee
Smart 3-in-1 portable meter (replaces MISM802) 1 probe for pH, conductivity and TDS Automatic Temperature Compensation Faster Processor with The New Chipset and Motherboard 100% Larger & Easier To Read LED Display Smaller, Ergonomic & Lighter Case Design Easier & Faster To Calibrate Longer Battery Life Specifications: Range - pH: 0.0-14.0 pH EC: 0-6.00 mS/cm TDS: 0-4000 ppm Resolution - pH: 0.1 pH EC: 0.01 mS/cm TDS: 10 ppm Accuracy - pH: ± 0.2 pH EC/TDS: 2%-Full Scale Conversion - .65 Calibration - Each Position: 1 Point - Manual Environment - 0-130°F Battery Type - 9V Alkaline (included)
-
3.6 of 5.0 with 5 Reviews
SALE PRICE: $210.78 78% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI122-01
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI122-01
|
The Hanna Instruments HI 122-01 is a benchtop pH, oxygen reduction potential (ORP)/mV, and temperature meter with built-in printer with manual temperature compensation, Automatic Temperature Compensation (ATC), five-point pH calibration, a multilevel LCD screen, a built-in printer, and automatic logging. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in lab, industrial and food applications. An ORP meter, also known as a redox potential tester, is used to measure the oxidization or reduction capacity of a solution, and to monitor chemical reactions and ion activity. It is commonly used for water testing, pulp bleaching, and for biological sample analysis in swimming pools, cooling towers, waste water treatment, and industrial applications. The multilevel LCD screen simultaneously displays the current measurement and the current temperature. Graphics display electrode condition and electrode response. A hold function freezes readings for recording. Log-on-demand stores up to 50 samples and auto-logging stores up to 1000 samples for each input channel. The meter has an opto-isolated RS-232 serial port for data transfer. ATC is provided by the HI 7662-T temperature probe (included). The meter has up to five-point calibration with seven memorized buffers (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, and 12.45 pH) and two custom buffers. A calibration check feature provides status of electrode condition and response time and status of the buffer solutions during calibration. The meter comes with the HI 1131P glass body, ceramic single-junction pH electrode with a spheric tip, a Bayonet Neill-Concelman (BNC) connector + pin connector, and a 1m (3.3') coaxial cable. The meter measures ORP/mV when using a compatible ORP electrode (not included). The operating temperature is 0 to 50 degrees C (32 to 122 degrees F) with a relative humidity of 95 percent. The input impedance is 10 E 12 Ohm. The meter power supply is 115V and it comes with a 12VDC adapter and weighs 500g/1.1lb.The HI 12...
-
3.6 of 5.0 with 24 Reviews
SALE PRICE: $210.81 6% OFF
Manufacturer: Thermo Scientific
Brand: UV-Vis
Manufacturer: Thermo Scientific
Brand: UV-Vis
Features an extensive selection of easy-to-install Excitation and Emission Filters that allows the user to configure the unit to meet application needs. Menu-driven software guides the operator through quantitative analysis, and automatic gain adjustment eliminates time consuming manual adjustment. Sample concentrations are calculated based upon linear regression analysis of standard curve data. Software includes a Filter Selection Help Guide and a Diagnostics menu for operation status checks. RS 232 serial interface included for data output to printer or computer. Large, versatile sample compartment accommodates a wide variety of cells or cuvettes. Ergonomic design facilitates quantitative analysis of multiple samples.
-
3.6 of 5.0 with 18 Reviews
SALE PRICE: $211.00 1% OFF
Manufacturer: Flomec Flow Meters
Brand: Flomec Flow Meters
Manufacturer: Flomec Flow Meters
Brand: Flomec Flow Meters
Flomec MR 5-30 series 5 - 30 gpm nutating disc mechanical fuel meter made from aluminum rated to 50 psi pressure with 1" NPT connection. Brand Name|Flomec#MFR Part Number|126300-03#UPC|031401000665#UNSPSC|41112501#Item|Mechanical Fuel Meter#Connection Size|1 Inch#Flow Rate|5 - 30 gpm#Pressure Rating|50 psi#Master Totalizer|999999.9 gal#Connection Type|NPT#Display Type|4-Digit Batch, 8-Digit Total#Temperature Rating|-20 to 125 deg F#Dimensions|7 Inch Length x 6-1/4 Inch Width x 5-7/8 Inch Height#Material|Aluminum#Standard/Approvals|UL Listed to US and Canadian Standards
-
3.6 of 5.0 with 33 Reviews
SALE PRICE: $213.13 12% OFF
Manufacturer: DWYER
Brand: Dwyer
Manufacturer: DWYER
Brand: Dwyer
NEW DWYER 1230-36-WM FLEX-TUBE MANOMETER 0-36IN-H2O WATER FLOW METER D537113
-
3.6 of 5.0 with 18 Reviews
SALE PRICE: $219.00
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Dwyer® Series WM2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows for simplicity and accuracy with wide flow ranges, even in low flow applications. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. These water meters are designed for long service life and maintenance-free operation, even under harsh conditions. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).
-
3.6 of 5.0 with 46 Reviews
SALE PRICE: $221.95
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, Pulse, LED W72XH36mm, 5 Digit, 13 Modes, 5 NPN Open Collector Output, 100- 240 VAC
-
3.6 of 5.0 with 1 Reviews
SALE PRICE: $225.33 15% OFF
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
|
The Cannon-Ubbelohde CUSMC-100 calibrated capillary-style viscometer has a 3.0 to 15 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.015 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The CUSMC-series size 100 viscometer uses a 240mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development...
-
3.6 of 5.0 with 4 Reviews
SALE PRICE: $226.95
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, Pulse, LED, W96xH48mm, 5-Digit, 13 Modes, 5 PNP Outputs + Transmission output (DC4-20 MA), 100-240 VAC
|
|