Water Quality & Instrumentation - Page 73

Manufacturer: Unico Brand: Unico

UNICO Application Software for PC's, Window's 2000, Windows ME or Windows XP required. Programs include Standard Curve, Abs./%T/Conc., and Abs.vs.Time. Includes USB cable.

Manufacturer: Laxco, Inc. Brand: Laxco Inc Model: DSM-SWL-J9001

Software that supports the DSM instruments and provide capture of the user sample data.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/IP/RF-6 U-tube reversed-flow viscometer has a 200 to 1,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 1.0 centistokes per second (cSt/s) for calculating kinematic viscosity. The BS/IP/RF-series size 6 viscometer uses a 280mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This U-tube reversed flow viscometer meets the ASTM International D446 standard for reversed-flow viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet indus...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/U-Tube-D viscometer has a 20 to 100 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.1 centistokes per second (cSt/s) for calculating kinematic viscosity. The BS/U-tube-series size D viscometer uses a 280mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This U-tube viscometer meets the ASTM International D446 standard for reversed-flow viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, ...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUC-500 calibrated viscometer has a 1,600 to 8,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 8.0 centistokes per second (cSt/s) for calculating kinematic viscosity. The CUC-series size 500 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This viscometer is suited for use at temperatures above 93 degrees C (200 degrees F) or below -18 degrees C (0 degrees F) and meets the ASTM International D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, proc...

Manufacturer: UNICO Brand: Unico

UNICO Micro Cell Holder Kit for use with 10 mm microcuvettes

Manufacturer: Platinum Brand: Platinum

Platinium Hydroponics has designed a table with a special drainage system allowing water to flow more smoothly, preventing the development of mold or fungus caused by stagnant water. This system is designed to grow plants in buckets filled with rockwool or on rocwool slabs, but given the depth of the table (8cm), it enables you to grow plants in pots or Air Pots while still keeping with the principle of ebb and flow.

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Simultaneously monitors in-line flow and pressureCompact and self-containedEasily carried in tool kit+/-5% full scale accuracy+/-1% repeatability0 - 160 psi with internal shock dampeners and blowout patch pressure gauge. Brand Name|Hedland#MFR Part Number|H623-128#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H623#Connection Size|1 Inch#Flow Rate|4 - 28 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male x NPTF Female#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 150 deg F#Dimensions|8-3/4 Inch Length x 3.3 Inch W x 3.3 Inch Height#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Simultaneously monitors in-line flow and pressureCompact and self-containedEasily carried in tool kit+/-5% full scale accuracy+/-1% repeatability0 - 160 psi with internal shock dampeners and blowout patch pressure gauge. Brand Name|Hedland#MFR Part Number|H623-116#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H623#Connection Size|1 Inch#Flow Rate|1 - 16 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male x NPTF Female#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 150 deg F#Dimensions|8-3/4 Inch Length x 3.3 Inch W x 3.3 Inch Height#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Simultaneously monitors in-line flow and pressureCompact and self-containedEasily carried in tool kit+/-5% full scale accuracy+/-1% repeatability0 - 160 psi with internal shock dampeners and blowout patch pressure gauge. Brand Name|Hedland#MFR Part Number|H623-028#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H623#Connection Size|1 Inch#Flow Rate|4 - 28 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male x NPTF Female#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 150 deg F#Dimensions|8-3/4 Inch Length x 3.3 Inch W x 3.3 Inch Height#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 1.0 Specific Gravity Water Media